Received-SPF: pass (google.com: domain of linux-kernel+bounces-51281-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
Message-ID: <a594ca1e-bef6-4ce9-b5c7-02999969a756@linaro.org>
Date: Sat, 3 Feb 2024 21:12:37 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
From: Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz
 to opp-v2
Content-Language: en-US, fr
To: Konrad Dybcio <konrad.dybcio@linaro.org>,
 Bjorn Andersson <andersson@kernel.org>, Rob Herring <robh@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
 linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <20240203-topic-8550_ufs_oppv2-v2-1-b0bef2a73e6c@linaro.org>
Autocrypt: addr=neil.armstrong@linaro.org; keydata=
 xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP
 GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4
 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9
 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik
 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB
 AAHNKk5laWwgQXJtc3Ryb25nIDxuZWlsLmFybXN0cm9uZ0BsaW5hcm8ub3JnPsLAkQQTAQoA
 OwIbIwULCQgHAwUVCgkICwUWAgMBAAIeAQIXgBYhBInsPQWERiF0UPIoSBaat7Gkz/iuBQJk
 Q5wSAhkBAAoJEBaat7Gkz/iuyhMIANiD94qDtUTJRfEW6GwXmtKWwl/mvqQtaTtZID2dos04
 YqBbshiJbejgVJjy+HODcNUIKBB3PSLaln4ltdsV73SBcwUNdzebfKspAQunCM22Mn6FBIxQ
 GizsMLcP/0FX4en9NaKGfK6ZdKK6kN1GR9YffMJd2P08EO8mHowmSRe/ExAODhAs9W7XXExw
 UNCY4pVJyRPpEhv373vvff60bHxc1k/FF9WaPscMt7hlkbFLUs85kHtQAmr8pV5Hy9ezsSRa
 GzJmiVclkPc2BY592IGBXRDQ38urXeM4nfhhvqA50b/nAEXc6FzqgXqDkEIwR66/Gbp0t3+r
 yQzpKRyQif3OwE0ETVkGzwEIALyKDN/OGURaHBVzwjgYq+ZtifvekdrSNl8TIDH8g1xicBYp
 QTbPn6bbSZbdvfeQPNCcD4/EhXZuhQXMcoJsQQQnO4vwVULmPGgtGf8PVc7dxKOeta+qUh6+
 SRh3vIcAUFHDT3f/Zdspz+e2E0hPV2hiSvICLk11qO6cyJE13zeNFoeY3ggrKY+IzbFomIZY
 4yG6xI99NIPEVE9lNBXBKIlewIyVlkOaYvJWSV+p5gdJXOvScNN1epm5YHmf9aE2ZjnqZGoM
 Mtsyw18YoX9BqMFInxqYQQ3j/HpVgTSvmo5ea5qQDDUaCsaTf8UeDcwYOtgI8iL4oHcsGtUX
 oUk33HEAEQEAAcLAXwQYAQIACQUCTVkGzwIbDAAKCRAWmrexpM/4rrXiB/sGbkQ6itMrAIfn
 M7IbRuiSZS1unlySUVYu3SD6YBYnNi3G5EpbwfBNuT3H8//rVvtOFK4OD8cRYkxXRQmTvqa3
 3eDIHu/zr1HMKErm+2SD6PO9umRef8V82o2oaCLvf4WeIssFjwB0b6a12opuRP7yo3E3gTCS
 KmbUuLv1CtxKQF+fUV1cVaTPMyT25Od+RC1K+iOR0F54oUJvJeq7fUzbn/KdlhA8XPGzwGRy
 4zcsPWvwnXgfe5tk680fEKZVwOZKIEuJC3v+/yZpQzDvGYJvbyix0lHnrCzq43WefRHI5XTT
 QbM0WUIBIcGmq38+OgUsMYu4NzLu7uZFAcmp6h8g
Organization: Linaro Developer Services
In-Reply-To: <20240203-topic-8550_ufs_oppv2-v2-1-b0bef2a73e6c@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

On 03/02/2024 01:10, Konrad Dybcio wrote:
> Now that the non-legacy form of OPP is supported within the UFS driver,
> go ahead and switch to it, adding support for more intermediate freq/power
> states.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> Extracted out of:
> https://lore.kernel.org/linux-arm-msm/15d2bd66-29f3-435b-8494-d82ec4036413@linaro.org/#t
> 
> Changes since v1:
> - Set the reference clock rate to 0 in opp entries, it doesn't support
>    ratesetting anyway. Confirmed UFS still works.
> ---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi | 50 +++++++++++++++++++++++++++++-------
>   1 file changed, 41 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index c89d8f3dad21..144e20edf237 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1966,6 +1966,7 @@ ufs_mem_hc: ufs@1d84000 {
>   			iommus = <&apps_smmu 0x60 0x0>;
>   			dma-coherent;
>   
> +			operating-points-v2 = <&ufs_opp_table>;
>   			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
>   					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
>   
> @@ -1986,18 +1987,49 @@ ufs_mem_hc: ufs@1d84000 {
>   				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
>   				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
>   				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> -			freq-table-hz =
> -				<75000000 300000000>,
> -				<0 0>,
> -				<0 0>,
> -				<75000000 300000000>,
> -				<100000000 403000000>,
> -				<0 0>,
> -				<0 0>,
> -				<0 0>;
>   			qcom,ice = <&ice>;
>   
>   			status = "disabled";
> +
> +			ufs_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-75000000 {
> +					opp-hz = /bits/ 64 <75000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <75000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-150000000 {
> +					opp-hz = /bits/ 64 <150000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <150000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>;
> +					required-opps = <&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-300000000 {
> +					opp-hz = /bits/ 64 <300000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <300000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +			};
>   		};
>   
>   		ice: crypto@1d88000 {
> 
> ---
> base-commit: 076d56d74f17e625b3d63cf4743b3d7d02180379
> change-id: 20240203-topic-8550_ufs_oppv2-bb88d63a4c58
> 
> Best regards,

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD