Received-SPF: pass (google.com: domain of linux-kernel+bounces-52766-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Roger Quadros <rogerq@kernel.org>
To: nm@ti.com,
	vigneshr@ti.com
Cc: afd@ti.com,
	kristo@kernel.org,
	robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org,
	srk@ti.com,
	r-gunasekaran@ti.com,
	b-liu@ti.com,
	linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Roger Quadros <rogerq@kernel.org>
Subject: [PATCH v4 0/3] arm64: dts: ti: am62: Add USB support for k3-am62p
Date: Mon,  5 Feb 2024 15:59:05 +0200
Message-Id: <20240205135908.54656-1-rogerq@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Hi,

This series first adds device nodes for USB0_PHY_CTRL and USB1_PHY_CTRL
in the wkup_conf node and fixus up the USB nodes to use the newly
added nodes.

Then it adds USB support for AM62P SoC and AM62P5-SK board.

In v4, we drop the 2 new patches that were added in v3 to add the
missing PHY2 register space to the USB controller wrapper node.

Changelog in each patch.

cheers,
-roger

Roger Quadros (3):
  dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
  arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers
  arm64: dts: ti: k3-am62p: add the USB sub-system

 .../devicetree/bindings/mfd/syscon.yaml       |  1 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  4 +-
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi    | 10 +++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     |  4 +-
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   | 10 +++
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi     | 46 +++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi   | 10 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       | 67 +++++++++++++++++++
 8 files changed, 148 insertions(+), 4 deletions(-)


base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
-- 
2.34.1