Received-SPF: pass (google.com: domain of linux-kernel+bounces-55457-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <65a24f21-4cc6-4843-b838-b1c7020ca45d@ti.com>
Date: Tue, 6 Feb 2024 12:29:13 -0600
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v1] arm64: dts: ti: verdin-am62: mallow: add TPM device
Content-Language: en-US
To: Francesco Dolcini <francesco@dolcini.it>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>,
        Rob
 Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
CC: Francesco Dolcini <francesco.dolcini@toradex.com>,
        <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
References: <20240126165136.28543-1-francesco@dolcini.it>
From: Andrew Davis <afd@ti.com>
In-Reply-To: <20240126165136.28543-1-francesco@dolcini.it>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit

On 1/26/24 10:51 AM, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add TPM device to Mallow device tree file, the device is connected to
> the SoC with SPI1/CS1, the same SPI interface is also available on an
> extension header together with an additional CS0 signal.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
> index 17b93534f658..77b1beb638ad 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
> @@ -127,6 +127,16 @@ &main_spi1 {
>   		    <&pinctrl_qspi1_cs2_gpio>;
>   	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
>   	status = "okay";
> +
> +	tpm@1 {
> +		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
> +		reg = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
> +		interrupt-parent = <&main_gpio1>;
> +		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;

Just a heads-up, the SLB9670 datasheet says this device uses
an active low interrupt (IRQ_TYPE_LEVEL_LOW). Using TYPE_EDGE
here can cause missed interrupts if the line stays low for
multiple interrupts.

Andrew

> +		spi-max-frequency = <18500000>;
> +	};
>   };
>   
>   /* Verdin UART_3 */