Received-SPF: pass (google.com: domain of linux-kernel+bounces-55680-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Hugo Villeneuve <hugo@hugovil.com>
To: gregkh@linuxfoundation.org,
	jirislaby@kernel.org
Cc: linux-kernel@vger.kernel.org,
	linux-serial@vger.kernel.org,
	hugo@hugovil.com,
	Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Tue,  6 Feb 2024 16:42:04 -0500
Message-Id: <20240206214208.2141067-1-hugo@hugovil.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: [PATCH 0/4] serial: sc16is7xx: split into core and I2C/SPI parts

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Hello,
this patch series splits the SPI/I2C parts for the sc16is7xx driver into
separate source files (and separate I2C/SPI drivers).

These changes are based on suggestions made by Andy Shevchenko
following this discussion:

Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/

The patches are multiple, simply to facilitate the review process. In the end,
they could be merged into a single patch.

This patch series depends on the the following patch (in linux-next/stable):
    commit f7b487648986 ("lib/find: add atomic find_bit() primitives")

I have tested the changes on a custom board with two SC16IS752 DUART over
a SPI interface using a Variscite IMX8MN NANO SOM. The four UARTs are
configured in RS-485 mode.

I did not test the changes on a real SC16is7xx using the I2C interface. But
I slighly modified the driver to be able to simulate an I2C device using
i2c-stub. I was then able to instantiate a virtual I2C device without
disturbing existing connection/communication between real SPI devices on
/dev/ttySC0 and /dev/ttySC2 (using a loopback cable).

Thank you.

Hugo Villeneuve (4):
  serial: sc16is7xx: simplify and improve Kconfig help text
  serial: sc16is7xx: split into core and I2C/SPI parts (core)
  serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  serial: sc16is7xx: split into core and I2C/SPI parts
    (sc16is7xx_regcfg)

 drivers/tty/serial/Kconfig         |  41 +++--
 drivers/tty/serial/Makefile        |   4 +-
 drivers/tty/serial/sc16is7xx.c     | 242 ++++++-----------------------
 drivers/tty/serial/sc16is7xx.h     |  41 +++++
 drivers/tty/serial/sc16is7xx_i2c.c |  74 +++++++++
 drivers/tty/serial/sc16is7xx_spi.c |  97 ++++++++++++
 6 files changed, 279 insertions(+), 220 deletions(-)
 create mode 100644 drivers/tty/serial/sc16is7xx.h
 create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c
 create mode 100644 drivers/tty/serial/sc16is7xx_spi.c


base-commit: 52b56990d214c7403b20f691ac61861a37c0f0db
-- 
2.39.2