Received-SPF: pass (google.com: domain of linux-kernel+bounces-56467-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Claudiu <claudiu.beznea@tuxon.dev>
To: s.shtylyov@omp.ru,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com
Cc: netdev@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	claudiu.beznea@tuxon.dev,
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: [PATCH net-next 4/5] net: ravb: Do not apply RX checksum settings to hardware if the interface is down
Date: Wed,  7 Feb 2024 14:07:32 +0200
Message-Id: <20240207120733.1746920-5-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20240207120733.1746920-1-claudiu.beznea.uj@bp.renesas.com>
References: <20240207120733.1746920-1-claudiu.beznea.uj@bp.renesas.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Do not apply the RX checksum settings to hardware if the interface is down.
In case runtime PM is enabled, and while the interface is down, the IP will
be in reset mode (as for some platforms disabling the clocks will switch
the IP to reset mode, which will lead to losing registers content) and
applying settings in reset mode is not an option. Instead, cache the RX
checksum settings and apply them in ravb_open() through ravb_emac_init().
This has been solved by introducing pm_runtime_active() check. The device
runtime PM usage counter has been incremented to avoid disabling the device
clocks while the check is in progress (if any).

Commit prepares for the addition of runtime PM.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes since [2]:
- use pm_runtime_get_noresume() and pm_runtime_active() and updated the
  commit message to describe that
- fixed typos
- s/CSUM/checksum in patch title and description

Changes in v3 of [2]:
- this was patch 20/21 in v2
- fixed typos in patch description
- removed code from ravb_open()
- use ndev->flags & IFF_UP checks instead of netif_running()

Changes in v2 of [2]:
- none; this patch is new

[2] https://lore.kernel.org/all/20240105082339.1468817-1-claudiu.beznea.uj@bp.renesas.com/

 drivers/net/ethernet/renesas/ravb_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 4f8d5c9e9e03..df47d3e057c5 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2385,8 +2385,14 @@ static int ravb_change_mtu(struct net_device *ndev, int new_mtu)
 static void ravb_set_rx_csum(struct net_device *ndev, bool enable)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
+	struct device *dev = &priv->pdev->dev;
 	unsigned long flags;
 
+	pm_runtime_get_noresume(dev);
+
+	if (!pm_runtime_active(dev))
+		goto out_rpm_put;
+
 	spin_lock_irqsave(&priv->lock, flags);
 
 	/* Disable TX and RX */
@@ -2399,6 +2405,9 @@ static void ravb_set_rx_csum(struct net_device *ndev, bool enable)
 	ravb_rcv_snd_enable(ndev);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
+
+out_rpm_put:
+	pm_runtime_put_noidle(dev);
 }
 
 static int ravb_set_features_gbeth(struct net_device *ndev,
-- 
2.39.2