Received-SPF: pass (google.com: domain of linux-kernel+bounces-59472-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: =?utf-8?q?Th=C3=A9o_Lebrun?= <theo.lebrun@bootlin.com>
Date: Fri, 09 Feb 2024 15:31:46 +0100
Subject: [PATCH v5 10/13] MIPS: mobileye: eyeq5: add OLB syscon node
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Message-Id: <20240209-mbly-clk-v5-10-f094ee5e918a@bootlin.com>
References: <20240209-mbly-clk-v5-0-f094ee5e918a@bootlin.com>
In-Reply-To: <20240209-mbly-clk-v5-0-f094ee5e918a@bootlin.com>
To: Gregory CLEMENT <gregory.clement@bootlin.com>, 
 Michael Turquette <mturquette@baylibre.com>, 
 Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, 
 Thomas Bogendoerfer <tsbogend@alpha.franken.de>, 
 Linus Walleij <linus.walleij@linaro.org>, 
 =?utf-8?q?Rafa=C5=82_Mi=C5=82ecki?= <rafal@milecki.pl>, 
 Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>, 
 linux-mips@vger.kernel.org, linux-clk@vger.kernel.org, 
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, 
 Thomas Petazzoni <thomas.petazzoni@bootlin.com>, 
 Tawfik Bayouk <tawfik.bayouk@mobileye.com>, linux-gpio@vger.kernel.org, 
 =?utf-8?q?Th=C3=A9o_Lebrun?= <theo.lebrun@bootlin.com>

The OLB ("Other Logic Block") is a syscon region hosting the clock,
reset and pin controllers. It contains registers such as I2C speed mode
that need to be accessible by other nodes.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 6cc5980e2fa1..e82d2a57f6da 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -100,6 +100,14 @@ uart2: serial@a00000 {
 			clock-names = "uartclk", "apb_pclk";
 		};
 
+		olb: system-controller@e00000 {
+			compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
+			reg = <0 0xe00000 0x0 0x400>;
+			ranges = <0x0 0x0 0xe00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		gic: interrupt-controller@140000 {
 			compatible = "mti,gic";
 			reg = <0x0 0x140000 0x0 0x20000>;

-- 
2.43.0