Received-SPF: pass (google.com: domain of linux-kernel+bounces-59974-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Subject: Re: [PATCH net-next v2 5/5] net: ravb: Add runtime PM support
To: Claudiu <claudiu.beznea@tuxon.dev>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
CC: <netdev@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Claudiu Beznea
	<claudiu.beznea.uj@bp.renesas.com>
References: <20240209170459.4143861-1-claudiu.beznea.uj@bp.renesas.com>
 <20240209170459.4143861-6-claudiu.beznea.uj@bp.renesas.com>
From: Sergey Shtylyov <s.shtylyov@omp.ru>
Organization: Open Mobile Platform
Message-ID: <3808dee0-b623-b870-7d96-94cc5fc12350@omp.ru>
Date: Sat, 10 Feb 2024 00:00:54 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.10.1
Precedence: bulk
MIME-Version: 1.0
In-Reply-To: <20240209170459.4143861-6-claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
X-KSE-Attachment-Filter-Triggered-Filters: Clean
X-KSE-BulkMessagesFiltering-Scan-Result: InTheLimit

On 2/9/24 8:04 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Add runtime PM support for the ravb driver. As the driver is used by
> different IP variants, with different behaviors, to be able to have the
> runtime PM support available for all devices, the preparatory commits
> moved all the resources parsing and allocations in the driver's probe
> function and kept the settings for ravb_open(). This is due to the fact
> that on some IP variants-platforms tuples disabling/enabling the clocks
> will switch the IP to the reset operation mode where registers' content is

   This pesky "registers' content" somehow evaded me -- should be "register
contents" as well...

> lost and reconfiguration needs to be done. For this the rabv_open()
> function enables the clocks, switches the IP to configuration mode, applies
> all the registers settings and switches the IP to the operational mode. At
> the end of ravb_open() IP is ready to send/receive data.
> 
> In ravb_close() necessary reverts are done (compared with ravb_open()), the
> IP is switched to reset mode and clocks are disabled.
> 
> The ethtool APIs or IOCTLs that might execute while the interface is down
> are either cached (and applied in ravb_open()) or rejected (as at that time
> the IP is in reset mode). Keeping the IP in the reset mode also increases
> the power saved (according to the hardware manual).
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
[...]

> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index f4be08f0198d..5bbfdfeef8a9 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -1939,16 +1939,21 @@ static int ravb_open(struct net_device *ndev)
>  {
>  	struct ravb_private *priv = netdev_priv(ndev);
>  	const struct ravb_hw_info *info = priv->info;
> +	struct device *dev = &priv->pdev->dev;
>  	int error;
>  
>  	napi_enable(&priv->napi[RAVB_BE]);
>  	if (info->nc_queues)
>  		napi_enable(&priv->napi[RAVB_NC]);
>  
> +	error = pm_runtime_resume_and_get(dev);
> +	if (error < 0)
> +		goto out_napi_off;

   Well, s/error/ret/ -- it would fit better here...

[...]
> @@ -3066,6 +3089,12 @@ static void ravb_remove(struct platform_device *pdev)
>  	struct net_device *ndev = platform_get_drvdata(pdev);
>  	struct ravb_private *priv = netdev_priv(ndev);
>  	const struct ravb_hw_info *info = priv->info;
> +	struct device *dev = &priv->pdev->dev;
> +	int error;
> +
> +	error = pm_runtime_resume_and_get(dev);
> +	if (error < 0)
> +		return;

   Again, s/erorr/ret/ in this case.

[...]

MBR, Sergey