Received-SPF: pass (google.com: domain of linux-kernel+bounces-60702-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
From: Andrey Skvortsov <andrej.skvortzov@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	Arnaud Ferraris <arnaud.ferraris@collabora.com>,
	Alexey Klimov <alexey.klimov@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
	Andrey Skvortsov <andrej.skvortzov@gmail.com>
Subject: [PATCH] arm64: dts: allwinner: a64: Add thermal trip points for GPU
Date: Sun, 11 Feb 2024 13:53:26 +0300
Message-ID: <20240211105326.506049-1-andrej.skvortzov@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Alexey Klimov <alexey.klimov@linaro.org>

Without trip points for GPU, the following errors are printed in the
dmesg log and the sun8i-thermal driver fails to load:

thermal_sys: Failed to find 'trips' node
thermal_sys: Failed to find trip points for thermal-sensor id=1
sun8i-thermal: probe of 1c25000.thermal-sensor failed with error -22

When thermal zones are defined, trip points definitions are mandatory.
Trip values for the GPU are assumed to be the same values as the CPU
ones. The available specs do not provide any hints about thermal regimes
for the GPU and it seems GPU is implemented on the same die as the CPU.

'make dtbs_check' complains about problem in dts for 18 A64-based boards
supported by the kernel:

sun50i-a64-pine64.dtb: thermal-zones: gpu0-thermal: 'trips' is a required property
	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
sun50i-a64-pine64.dtb: thermal-zones: gpu1-thermal: 'trips' is a required property
	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#

Tested on Pine a64+ and PinePhone 1.2.

Cc: Samuel Holland <samuel@sholland.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 57ac18738c99..c25da7229e42 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -244,6 +244,29 @@ gpu0_thermal: gpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu0_alert0: gpu0_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_alert1: gpu0_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu0_crit: gpu0_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		gpu1_thermal: gpu1-thermal {
@@ -251,6 +274,29 @@ gpu1_thermal: gpu1-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu1_alert0: gpu1_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_alert1: gpu1_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu1_crit: gpu1_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
-- 
2.43.0