Received-SPF: pass (google.com: domain of linux-kernel+bounces-62140-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Christophe Kerello <christophe.kerello@foss.st.com>
To: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
        <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>
CC: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <devicetree@vger.kernel.org>,
        Christophe Kerello <christophe.kerello@foss.st.com>
Subject: [PATCH 09/12] mtd: rawnand: stm32_fmc2: use dma_get_slave_caps to get DMA max burst
Date: Mon, 12 Feb 2024 18:48:19 +0100
Message-ID: <20240212174822.77734-10-christophe.kerello@foss.st.com>
In-Reply-To: <20240212174822.77734-1-christophe.kerello@foss.st.com>
References: <20240212174822.77734-1-christophe.kerello@foss.st.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

use dma_get_slave_caps API to get the max burst size of a DMA channel.

For MP1 SOCs, MDMA is used and the max burst size is 128.
For MP25 SOC, DMA3 is used and the max burst size is 64.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 29 +++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 88811139aaf5..a7db7b675514 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -264,6 +264,8 @@ struct stm32_fmc2_nfc {
 	struct sg_table dma_ecc_sg;
 	u8 *ecc_buf;
 	int dma_ecc_len;
+	u32 tx_dma_max_burst;
+	u32 rx_dma_max_burst;
 
 	struct completion complete;
 	struct completion dma_data_complete;
@@ -347,20 +349,26 @@ static int stm32_fmc2_nfc_select_chip(struct nand_chip *chip, int chipnr)
 	stm32_fmc2_nfc_setup(chip);
 	stm32_fmc2_nfc_timings_init(chip);
 
-	if (nfc->dma_tx_ch && nfc->dma_rx_ch) {
+	if (nfc->dma_tx_ch) {
 		memset(&dma_cfg, 0, sizeof(dma_cfg));
-		dma_cfg.src_addr = nfc->data_phys_addr[nfc->cs_sel];
 		dma_cfg.dst_addr = nfc->data_phys_addr[nfc->cs_sel];
-		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dma_cfg.src_maxburst = 32;
-		dma_cfg.dst_maxburst = 32;
+		dma_cfg.dst_maxburst = nfc->tx_dma_max_burst /
+				       dma_cfg.dst_addr_width;
 
 		ret = dmaengine_slave_config(nfc->dma_tx_ch, &dma_cfg);
 		if (ret) {
 			dev_err(nfc->dev, "tx DMA engine slave config failed\n");
 			return ret;
 		}
+	}
+
+	if (nfc->dma_rx_ch) {
+		memset(&dma_cfg, 0, sizeof(dma_cfg));
+		dma_cfg.src_addr = nfc->data_phys_addr[nfc->cs_sel];
+		dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		dma_cfg.src_maxburst = nfc->rx_dma_max_burst /
+				       dma_cfg.src_addr_width;
 
 		ret = dmaengine_slave_config(nfc->dma_rx_ch, &dma_cfg);
 		if (ret) {
@@ -1545,6 +1553,7 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
 
 static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
 {
+	struct dma_slave_caps caps;
 	int ret = 0;
 
 	nfc->dma_tx_ch = dma_request_chan(nfc->dev, "tx");
@@ -1557,6 +1566,11 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
 		goto err_dma;
 	}
 
+	ret = dma_get_slave_caps(nfc->dma_tx_ch, &caps);
+	if (ret)
+		return ret;
+	nfc->tx_dma_max_burst = caps.max_burst;
+
 	nfc->dma_rx_ch = dma_request_chan(nfc->dev, "rx");
 	if (IS_ERR(nfc->dma_rx_ch)) {
 		ret = PTR_ERR(nfc->dma_rx_ch);
@@ -1567,6 +1581,11 @@ static int stm32_fmc2_nfc_dma_setup(struct stm32_fmc2_nfc *nfc)
 		goto err_dma;
 	}
 
+	ret = dma_get_slave_caps(nfc->dma_rx_ch, &caps);
+	if (ret)
+		return ret;
+	nfc->rx_dma_max_burst = caps.max_burst;
+
 	nfc->dma_ecc_ch = dma_request_chan(nfc->dev, "ecc");
 	if (IS_ERR(nfc->dma_ecc_ch)) {
 		ret = PTR_ERR(nfc->dma_ecc_ch);
-- 
2.25.1