Received-SPF: pass (google.com: domain of linux-kernel+bounces-62179-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2] dt-bindings: net: qca,ar9331: convert to DT schema
Date: Mon, 12 Feb 2024 19:29:11 +0100
Message-Id: <20240212182911.233819-1-krzysztof.kozlowski@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Convert the Qualcomm Atheros AR9331 built-in switch bindings to DT
schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

DSA switch bindings still bring me headache...

Changes in v2:
1. Narrow pattern for phy children to ethernet-phy@ or phy@ (MIPS DTS
   has the latter) - Conor.
---
 .../devicetree/bindings/net/dsa/ar9331.txt    | 147 ----------------
 .../bindings/net/dsa/qca,ar9331.yaml          | 161 ++++++++++++++++++
 2 files changed, 161 insertions(+), 147 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/dsa/ar9331.txt
 create mode 100644 Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml

diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
deleted file mode 100644
index f824fdae0da2..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Atheros AR9331 built-in switch
-=============================
-
-It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
-MDIO bus. All PHYs are built-in as well.
-
-Required properties:
-
- - compatible: should be: "qca,ar9331-switch"
- - reg: Address on the MII bus for the switch.
- - resets : Must contain an entry for each entry in reset-names.
- - reset-names : Must include the following entries: "switch"
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the switch
- - interrupt-controller: Indicates the switch is itself an interrupt
-   controller. This is used for the PHY interrupts.
- - #interrupt-cells: must be 1
- - mdio: Container of PHY and devices on the switches MDIO bus.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-Examples:
-
-eth0: ethernet@19000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x19000000 0x200>;
-	interrupts = <4>;
-
-	resets = <&rst 9>, <&rst 22>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "mii";
-	phy-handle = <&phy_port4>;
-};
-
-eth1: ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch10: switch@10 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "qca,ar9331-switch";
-			reg = <0x10>;
-			resets = <&rst 8>;
-			reset-names = "switch";
-
-			interrupt-parent = <&miscintc>;
-			interrupts = <12>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch_port0: port@0 {
-					reg = <0x0>;
-					ethernet = <&eth1>;
-
-					phy-mode = "gmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				switch_port1: port@1 {
-					reg = <0x1>;
-					phy-handle = <&phy_port0>;
-					phy-mode = "internal";
-				};
-
-				switch_port2: port@2 {
-					reg = <0x2>;
-					phy-handle = <&phy_port1>;
-					phy-mode = "internal";
-				};
-
-				switch_port3: port@3 {
-					reg = <0x3>;
-					phy-handle = <&phy_port2>;
-					phy-mode = "internal";
-				};
-
-				switch_port4: port@4 {
-					reg = <0x4>;
-					phy-handle = <&phy_port3>;
-					phy-mode = "internal";
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				interrupt-parent = <&switch10>;
-
-				phy_port0: phy@0 {
-					reg = <0x0>;
-					interrupts = <0>;
-				};
-
-				phy_port1: phy@1 {
-					reg = <0x1>;
-					interrupts = <0>;
-				};
-
-				phy_port2: phy@2 {
-					reg = <0x2>;
-					interrupts = <0>;
-				};
-
-				phy_port3: phy@3 {
-					reg = <0x3>;
-					interrupts = <0>;
-				};
-
-				phy_port4: phy@4 {
-					reg = <0x4>;
-					interrupts = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml b/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
new file mode 100644
index 000000000000..fd9ddc59d38c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9331 built-in switch
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and
+  addressable over internal MDIO bus. All PHYs are built-in as well.
+
+properties:
+  compatible:
+    const: qca,ar9331-switch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    properties:
+      interrupt-parent: true
+
+    patternProperties:
+      '(ethernet-)?phy@[0-4]+$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          reg: true
+          interrupts:
+            maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - mdio
+  - ports
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch10: switch@10 {
+            compatible = "qca,ar9331-switch";
+            reg = <0x10>;
+
+            interrupt-parent = <&miscintc>;
+            interrupts = <12>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            resets = <&rst 8>;
+            reset-names = "switch";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+                    ethernet = <&eth1>;
+
+                    phy-mode = "gmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <0x1>;
+                    phy-handle = <&phy_port0>;
+                    phy-mode = "internal";
+                };
+
+                port@2 {
+                    reg = <0x2>;
+                    phy-handle = <&phy_port1>;
+                    phy-mode = "internal";
+                };
+
+                port@3 {
+                    reg = <0x3>;
+                    phy-handle = <&phy_port2>;
+                    phy-mode = "internal";
+                };
+
+                port@4 {
+                    reg = <0x4>;
+                    phy-handle = <&phy_port3>;
+                    phy-mode = "internal";
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                interrupt-parent = <&switch10>;
+
+                phy_port0: ethernet-phy@0 {
+                    reg = <0x0>;
+                    interrupts = <0>;
+                };
+
+                phy_port1: ethernet-phy@1 {
+                    reg = <0x1>;
+                    interrupts = <0>;
+                };
+
+                phy_port2: ethernet-phy@2 {
+                    reg = <0x2>;
+                    interrupts = <0>;
+                };
+
+                phy_port3: ethernet-phy@3 {
+                    reg = <0x3>;
+                    interrupts = <0>;
+                };
+
+                phy_port4: ethernet-phy@4 {
+                    reg = <0x4>;
+                    interrupts = <0>;
+                };
+            };
+        };
+    };
-- 
2.34.1