Received-SPF: pass (google.com: domain of linux-kernel+bounces-62226-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Date: Mon, 12 Feb 2024 19:48:37 +0100
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Johan Jonker <jbx6244@yandex.com>
Cc: Heiko Stuebner <heiko@sntech.de>, Vinod Koul <vkoul@kernel.org>, 
	Kishon Vijay Abraham I <kishon@kernel.org>, linux-rockchip@lists.infradead.org, 
	linux-phy@lists.infradead.org, Rob Herring <robh+dt@kernel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, 
	Frank Wang <frank.wang@rock-chips.com>, Kever Yang <kever.yang@rock-chips.com>, 
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCH v1 06/10] arm64: dts: rockchip: add USBDP phys on rk3588
Message-ID: <dsfne22iebd7mvyyskhpw3rkkfhlxpv32afht456vq3u52axyr@kgkxfzm5vn4c>
References: <20240209181831.104687-1-sebastian.reichel@collabora.com>
 <20240209181831.104687-7-sebastian.reichel@collabora.com>
 <6bc2f825-7e50-488d-a373-a211ac2cc8e1@yandex.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <6bc2f825-7e50-488d-a373-a211ac2cc8e1@yandex.com>

Hi Johan,

On Sun, Feb 11, 2024 at 08:24:36PM +0100, Johan Jonker wrote:
> > +		u2phy1: usb2-phy@4000 {
> 
>         "usb2phy@[0-9a-f]+$":

Interesting. I would have expected that to pop up in dtbs_check, but
it does not for some reason. I will fix it for all usb2phy instances
in rk3588.

> > +			compatible = "rockchip,rk3588-usb2phy";
> > +			reg = <0x4000 0x10>;
> > +			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
> 
> > +			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
> > +			reset-names = "phy", "apb";
> > +			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
> > +			clock-names = "phyclk";
> > +			clock-output-names = "usb480m_phy1";
> > +			#clock-cells = <0>;
> 
> Align with the (new) documentation
> about property ordering.
>
> > +			status = "disabled";
> > +
> > +			u2phy1_otg: otg-port {
> > +				#phy-cells = <0>;
> > +				status = "disabled";
> > +			};
> > +		};
> > +	};

The above follows everything from [0], which does not specify an
order for the "standard/common  properties". For those this follows
the order of existing usb2phy nodes. Did I miss any other new
Documentation?

[0] https://www.kernel.org/doc/html/next/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node

-- Sebastian