Received-SPF: pass (google.com: domain of linux-kernel+bounces-62365-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
To: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-kernel@vger.kernel.org,
	linux-pwm@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Subject: [PATCH v7 2/4] pwm: Add support for RZ/V2M PWM driver
Date: Mon, 12 Feb 2024 21:06:50 +0000
Message-Id: <20240212210652.368680-3-fabrizio.castro.jz@renesas.com>
In-Reply-To: <20240212210652.368680-1-fabrizio.castro.jz@renesas.com>
References: <20240212210652.368680-1-fabrizio.castro.jz@renesas.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Biju Das <biju.das.jz@bp.renesas.com>

The RZ/V2{M, MA} PWM Timer supports the following functions:

 * The PWM has 24-bit counters which operate at PWM_CLK (48 MHz).
 * The frequency division ratio for internal counter operation is
   selectable as PWM_CLK divided by 1, 16, 256, or 2048.
 * The period as well as the duty cycle is adjustable.
 * The low-level and high-level order of the PWM signals can be
   inverted.
 * The duty cycle of the PWM signal is selectable in the range from
   0 to 100%.
 * The minimum resolution is 20.83 ns.
 * Three interrupt sources: Rising and falling edges of the PWM signal
   and clearing of the counter
 * Counter operation and the bus interface are asynchronous and both
   can operate independently of the magnitude relationship of the
   respective clock periods.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---

v6->v7:
 * Addressed the build issue reported by the kernel test robot.
 * Added include math64.h.
 * Reworked rzv2m_pwm_mul_u64_u64_div_u64_roundup to make use of
   div64_u64 and to get rid of % while keeping the same formula.
 * Added rzv2m_pwm_mul_u64_u64_div_u64_rounddown.
 * Replaced / with div64_u64 wherever necessary.
v5->v6:
 * Added Fab's Signed-off-by.
 * Updated copyright year to 2024.
 * Added include of limits.h.
 * Added variable max_period to rzv2m_pwm_chip.
 * Simplified the calculations by calculating max_period during probe,
   based on the numerical limits of the formula and the u64 data type.
 * Added rzv2m_pwm_mul_u64_u64_div_u64_roundup.
 * Added rzv2m_pwm_prescale_to_shift to fix the calculation of the
   frequency divider.
 * Improved the calculations and the variable names of
   rzv2m_pwm_get_state.
 * Improved the calculations of rzv2m_pwm_config.
 * Removed .owner from rzv2m_pwm_ops.
 * Improved rzv2m_pwm_pm_runtime_resume and renamed its err variable to
   ret.
 * Removed of_match_ptr.
 * Added Fab as module author.
v4->v5:
 * Sorted KConfig file
 * Sorted Make file
 * Updated copyright header 2022->2023.
 * Updated limitation section.
 * Replaced the variable chip->rzv2m_pwm in rzv2m_pwm_wait_delay()
 * Replaced polarity logic as per HW manual dutycycle = Ton/Ton+Toff, so
   eventhough native polarity is inverted from period point of view it
   is correct.
 * Added logic for supporting 0% , 100% and remaining duty cycle.
 * On config() replaced
   pm_runtime_resume_and_get()->pm_runtime_get_sync()
 * Counter is stopped while updating period/polarity to avoid glitches.
 * Added error check for clk_prepare_enable()
 * Introduced is_ch_enabled variable to cache channel enable status.
 * clk_get_rate is called after enabling the clock and
   clk_rate_exclusive_get()
 * Added comment for delay
 * Replaced 1000000000UL->NSEC_PER_SEC.
 * Improved error handling in probe().
v3->v4:
 * Documented the hardware properties in "Limitations" section
 * Dropped the macros F2CYCLE_NSEC, U24_MASK and U24_MAX.
 * Added RZV2M_PWMCYC_PERIOD macro for U24_MAX
 * Dropped rzv2m_pwm_freq_div variable and started using 1 << (4 * i)
   for calculating divider as it is power of 16.
 * Reordered the functions to have rzv2m_pwm_config() directly before
   rzv2m_pwm_apply().
 * Improved the logic for calculating period and duty cycle in config()
 * Merged multiple RZV2M_PWMCTR register writes to a single write in
 * config()
 * replaced pwm_is_enabled()->pwm->state.enabled
 * Avoided assigning bit value as enum pwm_polarity instead used enum
 * constant.
 * Fixed various issues in probe error path.
 * Updated the logic for PWM cycle setting register
 * A 100% duty cycle is only possible with PWMLOW > PWMCYC. So
   restricting PWMCYC values < 0xffffff
 * The native polarity of the hardware is inverted (i.e. it starts with
   the low part). So switched the inversion bit handling.
v2->v3:
 * Added return code for rzv2m_pwm_get_state()
 * Added comment in rzv2m_pwm_reset_assert_pm_disable()
v1->v2:
 * Replaced
   devm_reset_control_get_optional_shared->devm_reset_control_get_shared

 drivers/pwm/Kconfig     |  11 +
 drivers/pwm/Makefile    |   1 +
 drivers/pwm/pwm-rzv2m.c | 480 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 492 insertions(+)
 create mode 100644 drivers/pwm/pwm-rzv2m.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 4b956d661755..55d46e6183a2 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -524,6 +524,17 @@ config PWM_RZ_MTU3
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-rz-mtu3.
 
+config PWM_RZV2M
+       tristate "Renesas RZ/V2M PWM support"
+       depends on ARCH_R9A09G011 || COMPILE_TEST
+       depends on HAS_IOMEM
+       help
+         This driver exposes the PWM controller found in Renesas
+         RZ/V2M like chips through the PWM API.
+
+         To compile this driver as a module, choose M here: the module
+         will be called pwm-rzv2m.
+
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c5ec9e168ee7..cf5a4a1c3b1a 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
 obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
+obj-$(CONFIG_PWM_RZV2M)		+= pwm-rzv2m.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
 obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
diff --git a/drivers/pwm/pwm-rzv2m.c b/drivers/pwm/pwm-rzv2m.c
new file mode 100644
index 000000000000..eb9062293590
--- /dev/null
+++ b/drivers/pwm/pwm-rzv2m.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/V2M PWM Timer (PWM) driver
+ *
+ * Copyright (C) 2024 Renesas Electronics Corporation
+ *
+ * Hardware manual for this IP can be found here
+ * https://www.renesas.com/in/en/document/mah/rzv2m-users-manual-hardware?language=en
+ *
+ * Limitations:
+ * - Changes to the duty cycle configuration get effective only after the next
+ *   period end.
+ * - The duty cycle can be changed only by modifying the PWMLOW register
+ *   value and changing the pulse width at low level. The duty cycle becomes
+ *   0% for the low width when the value of the PWMLOW register is 0x0h
+ *   and 100% for the low width when the value of the PWMLOW > PWMCYC.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/limits.h>
+#include <linux/math64.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+#include <linux/time.h>
+
+#define RZV2M_PWMCTR	0x0
+#define RZV2M_PWMCYC	0x4
+#define RZV2M_PWMLOW	0x8
+#define RZV2M_PWMCNT	0xc
+
+#define RZV2M_PWMCTR_PWMPS	GENMASK(17, 16)
+#define RZV2M_PWMCTR_PWMHL	BIT(3)
+#define RZV2M_PWMCTR_PWMTM	BIT(2)
+#define RZV2M_PWMCTR_PWME	BIT(1)
+
+#define RZV2M_PWMCYC_PERIOD	GENMASK(23, 0)
+#define RZV2M_PWMLOW_PERIOD	GENMASK(23, 0)
+
+struct rzv2m_pwm_chip {
+	u64 max_period;
+	struct pwm_chip chip;
+	void __iomem *mmio;
+	struct reset_control *rstc;
+	struct clk *apb_clk;
+	struct clk *pwm_clk;
+	unsigned long rate;
+	unsigned long delay;
+	unsigned long pwm_cyc;
+	enum pwm_polarity polarity;
+	bool is_ch_enabled;
+};
+
+static inline u64 rzv2m_pwm_mul_u64_u64_div_u64_roundup(u64 a, u64 b, u64 c)
+{
+	u64 ab = a * b;
+	u64 d = div64_u64(ab, c);
+	u64 e = d * c;
+
+	return d + ((ab - e) ? 1 : 0);
+}
+
+static inline u64 rzv2m_pwm_mul_u64_u64_div_u64_rounddown(u64 a, u64 b, u64 c)
+{
+	return div64_u64(a * b, c);
+}
+
+static inline struct rzv2m_pwm_chip *to_rzv2m_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct rzv2m_pwm_chip, chip);
+}
+
+static void rzv2m_pwm_wait_delay(struct rzv2m_pwm_chip *rzv2m_pwm)
+{
+	/* delay timer when change the setting register */
+	ndelay(rzv2m_pwm->delay);
+}
+
+static void rzv2m_pwm_write(struct rzv2m_pwm_chip *rzv2m_pwm, u32 reg, u32 data)
+{
+	writel(data, rzv2m_pwm->mmio + reg);
+}
+
+static u32 rzv2m_pwm_read(struct rzv2m_pwm_chip *rzv2m_pwm, u32 reg)
+{
+	return readl(rzv2m_pwm->mmio + reg);
+}
+
+static void rzv2m_pwm_modify(struct rzv2m_pwm_chip *rzv2m_pwm, u32 reg, u32 clr,
+			     u32 set)
+{
+	rzv2m_pwm_write(rzv2m_pwm, reg,
+			(rzv2m_pwm_read(rzv2m_pwm, reg) & ~clr) | set);
+}
+
+static u8 rzv2m_pwm_calculate_prescale(struct rzv2m_pwm_chip *rzv2m_pwm,
+				       u64 period_cycles)
+{
+	u32 prescaled_period_cycles;
+	u8 prescale;
+
+	prescaled_period_cycles = period_cycles >> 24;
+	if (prescaled_period_cycles >= 256)
+		prescale = 3;
+	else
+		prescale = (fls(prescaled_period_cycles) + 3) / 4;
+
+	return prescale;
+}
+
+static inline int rzv2m_pwm_prescale_to_shift(u8 prescale)
+{
+	return prescale == 3 ? 11 : prescale * 4;
+}
+
+static int rzv2m_pwm_enable(struct rzv2m_pwm_chip *rzv2m_pwm)
+{
+	int rc;
+
+	rc = pm_runtime_resume_and_get(rzv2m_pwm->chip.dev);
+	if (rc)
+		return rc;
+
+	rzv2m_pwm_modify(rzv2m_pwm, RZV2M_PWMCTR, RZV2M_PWMCTR_PWME,
+			 RZV2M_PWMCTR_PWME);
+	rzv2m_pwm_wait_delay(rzv2m_pwm);
+	rzv2m_pwm->is_ch_enabled = true;
+
+	return 0;
+}
+
+static void rzv2m_pwm_disable(struct rzv2m_pwm_chip *rzv2m_pwm)
+{
+	rzv2m_pwm_modify(rzv2m_pwm, RZV2M_PWMCTR, RZV2M_PWMCTR_PWME, 0);
+	rzv2m_pwm_wait_delay(rzv2m_pwm);
+	pm_runtime_put_sync(rzv2m_pwm->chip.dev);
+	rzv2m_pwm->is_ch_enabled = false;
+}
+
+static int rzv2m_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = to_rzv2m_pwm_chip(chip);
+	u16 frequency_divisor;
+	u32 ctr, cyc, low;
+	u8 prescale;
+
+	pm_runtime_get_sync(chip->dev);
+	ctr = rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMCTR);
+	state->enabled = FIELD_GET(RZV2M_PWMCTR_PWME, ctr);
+	state->polarity = FIELD_GET(RZV2M_PWMCTR_PWMHL, ctr) ?
+		PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
+	prescale = FIELD_GET(RZV2M_PWMCTR_PWMPS, ctr);
+	frequency_divisor = 1 << rzv2m_pwm_prescale_to_shift(prescale);
+
+	cyc = rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMCYC);
+	state->period = rzv2m_pwm_mul_u64_u64_div_u64_roundup(cyc + 1,
+				NSEC_PER_SEC * frequency_divisor,
+				rzv2m_pwm->rate);
+
+	low = rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMLOW);
+	state->duty_cycle = rzv2m_pwm_mul_u64_u64_div_u64_roundup(cyc + 1 - low,
+				NSEC_PER_SEC * frequency_divisor,
+				rzv2m_pwm->rate);
+
+	return pm_runtime_put(chip->dev);
+}
+
+static int rzv2m_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = to_rzv2m_pwm_chip(chip);
+	u64 period = state->period, duty_cycle = state->duty_cycle;
+	u16 frequency_divisor;
+	u64 pwm_cyc, pwm_low;
+	u8 prescale;
+	u32 pwm_ctr;
+
+	/*
+	 * Clamp period and duty cycle to their maximum values for our current
+	 * configuration rather than letting our calculations overflow.
+	 */
+	if (period > rzv2m_pwm->max_period) {
+		period = rzv2m_pwm->max_period;
+		if (duty_cycle > rzv2m_pwm->max_period)
+			duty_cycle = period;
+	}
+
+	/*
+	 * Formula for calculating PWM Cycle Setting Register:
+	 * PWM cycle = (PWM period(ns) / (PWM_CLK period(ns) × Div ratio)) - 1
+	 */
+	pwm_cyc = rzv2m_pwm_mul_u64_u64_div_u64_rounddown(period,
+							  rzv2m_pwm->rate,
+							  NSEC_PER_SEC);
+	pwm_cyc = pwm_cyc ? pwm_cyc : 1;
+
+	prescale = rzv2m_pwm_calculate_prescale(rzv2m_pwm, pwm_cyc - 1);
+	frequency_divisor = 1 << rzv2m_pwm_prescale_to_shift(prescale);
+	if (frequency_divisor > 1) {
+		pwm_cyc = rzv2m_pwm_mul_u64_u64_div_u64_rounddown(period,
+				rzv2m_pwm->rate,
+				NSEC_PER_SEC * frequency_divisor);
+		pwm_cyc = pwm_cyc ? pwm_cyc : 1;
+	}
+
+	if (pwm_cyc && !FIELD_FIT(RZV2M_PWMCYC_PERIOD, pwm_cyc - 1))
+		pwm_cyc = RZV2M_PWMCYC_PERIOD + 1;
+
+	/*
+	 * Formula for calculating PWMLOW register:
+	 * PWMLOW register = PWM cycle * Low pulse width ratio (%)
+	 */
+	pwm_low = rzv2m_pwm_mul_u64_u64_div_u64_rounddown(duty_cycle,
+			rzv2m_pwm->rate, NSEC_PER_SEC * frequency_divisor);
+
+	pwm_low = pwm_cyc - pwm_low;
+	if (!FIELD_FIT(RZV2M_PWMLOW_PERIOD, pwm_low))
+		pwm_low = RZV2M_PWMLOW_PERIOD;
+
+	pwm_cyc--;
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the clock
+	 * before writing the register.
+	 */
+	if (!pwm->state.enabled)
+		pm_runtime_get_sync(rzv2m_pwm->chip.dev);
+
+	/*
+	 * To change the setting value of the PWM cycle setting register
+	 * (PWMm_PWMCYC) or polarity, set the PWME bit of the PWM control
+	 * register (PWMm_PWMCTR) to 0b and stop the counter operation.
+	 */
+	if (rzv2m_pwm->polarity != state->polarity || rzv2m_pwm->pwm_cyc != pwm_cyc) {
+		rzv2m_pwm_modify(rzv2m_pwm, RZV2M_PWMCTR, RZV2M_PWMCTR_PWME, 0);
+		rzv2m_pwm_wait_delay(rzv2m_pwm);
+	}
+
+	rzv2m_pwm_write(rzv2m_pwm, RZV2M_PWMCYC, pwm_cyc);
+	rzv2m_pwm_write(rzv2m_pwm, RZV2M_PWMLOW, pwm_low);
+
+	pwm_ctr = FIELD_PREP(RZV2M_PWMCTR_PWMPS, prescale);
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		pwm_ctr |= RZV2M_PWMCTR_PWMHL;
+
+	rzv2m_pwm_modify(rzv2m_pwm, RZV2M_PWMCTR, RZV2M_PWMCTR_PWMTM |
+			 RZV2M_PWMCTR_PWMPS | RZV2M_PWMCTR_PWMHL, pwm_ctr);
+
+	if (rzv2m_pwm->polarity != state->polarity || rzv2m_pwm->pwm_cyc != pwm_cyc) {
+		rzv2m_pwm->polarity = state->polarity;
+		rzv2m_pwm->pwm_cyc = pwm_cyc;
+		rzv2m_pwm_modify(rzv2m_pwm, RZV2M_PWMCTR, RZV2M_PWMCTR_PWME,
+				 RZV2M_PWMCTR_PWME);
+	}
+
+	rzv2m_pwm_wait_delay(rzv2m_pwm);
+
+	/* If the PWM is not enabled, turn the clock off again to save power. */
+	if (!pwm->state.enabled)
+		pm_runtime_put(rzv2m_pwm->chip.dev);
+
+	return 0;
+}
+
+static int rzv2m_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = to_rzv2m_pwm_chip(chip);
+	bool enabled = pwm->state.enabled;
+	int ret;
+
+	if (!state->enabled) {
+		if (enabled)
+			rzv2m_pwm_disable(rzv2m_pwm);
+
+		return 0;
+	}
+
+	ret = rzv2m_pwm_config(chip, pwm, state);
+	if (ret)
+		return ret;
+
+	if (!enabled)
+		ret = rzv2m_pwm_enable(rzv2m_pwm);
+
+	return ret;
+}
+
+static const struct pwm_ops rzv2m_pwm_ops = {
+	.get_state = rzv2m_pwm_get_state,
+	.apply = rzv2m_pwm_apply,
+};
+
+static int rzv2m_pwm_pm_runtime_suspend(struct device *dev)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(rzv2m_pwm->pwm_clk);
+	clk_disable_unprepare(rzv2m_pwm->apb_clk);
+
+	return 0;
+}
+
+static int rzv2m_pwm_pm_runtime_resume(struct device *dev)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(rzv2m_pwm->apb_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(rzv2m_pwm->pwm_clk);
+	if (ret)
+		clk_disable_unprepare(rzv2m_pwm->apb_clk);
+
+	return ret;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rzv2m_pwm_pm_ops,
+				 rzv2m_pwm_pm_runtime_suspend,
+				 rzv2m_pwm_pm_runtime_resume, NULL);
+
+static void rzv2m_pwm_reset_assert_pm_disable(void *data)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm = data;
+
+	/*
+	 * The below check is for making balanced PM usage count in probe/remove
+	 * eg: boot loader is turning on PWM and probe increments the PM usage
+	 * count. Before apply, if there is unbind/remove callback we need to
+	 * decrement the PM usage count.
+	 */
+	if (rzv2m_pwm->is_ch_enabled)
+		pm_runtime_put(rzv2m_pwm->chip.dev);
+
+	clk_rate_exclusive_put(rzv2m_pwm->pwm_clk);
+	clk_rate_exclusive_put(rzv2m_pwm->apb_clk);
+	pm_runtime_disable(rzv2m_pwm->chip.dev);
+	pm_runtime_set_suspended(rzv2m_pwm->chip.dev);
+	reset_control_assert(rzv2m_pwm->rstc);
+}
+
+static int rzv2m_pwm_probe(struct platform_device *pdev)
+{
+	struct rzv2m_pwm_chip *rzv2m_pwm;
+	unsigned long apb_clk_rate;
+	int ret;
+
+	rzv2m_pwm = devm_kzalloc(&pdev->dev, sizeof(*rzv2m_pwm), GFP_KERNEL);
+	if (!rzv2m_pwm)
+		return -ENOMEM;
+
+	rzv2m_pwm->mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rzv2m_pwm->mmio))
+		return PTR_ERR(rzv2m_pwm->mmio);
+
+	rzv2m_pwm->apb_clk = devm_clk_get(&pdev->dev, "apb");
+	if (IS_ERR(rzv2m_pwm->apb_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rzv2m_pwm->apb_clk),
+				     "cannot get apb clock\n");
+
+	rzv2m_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(rzv2m_pwm->pwm_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rzv2m_pwm->pwm_clk),
+				     "cannot get pwm clock\n");
+
+	rzv2m_pwm->rstc = devm_reset_control_get_shared(&pdev->dev, NULL);
+	if (IS_ERR(rzv2m_pwm->rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rzv2m_pwm->rstc),
+				     "get reset failed\n");
+
+	platform_set_drvdata(pdev, rzv2m_pwm);
+	ret = reset_control_deassert(rzv2m_pwm->rstc);
+	if (ret) {
+		return dev_err_probe(&pdev->dev, ret,
+			      "cannot deassert reset control\n");
+	}
+
+	ret = clk_prepare_enable(rzv2m_pwm->apb_clk);
+	if (ret < 0)
+		goto err_reset;
+
+	ret = clk_prepare_enable(rzv2m_pwm->pwm_clk);
+	if (ret < 0)
+		goto disable_apb_clk;
+
+	clk_rate_exclusive_get(rzv2m_pwm->apb_clk);
+	clk_rate_exclusive_get(rzv2m_pwm->pwm_clk);
+	apb_clk_rate = clk_get_rate(rzv2m_pwm->apb_clk);
+	if (!apb_clk_rate)
+		goto err_rate_put;
+
+	rzv2m_pwm->rate = clk_get_rate(rzv2m_pwm->pwm_clk);
+	if (!rzv2m_pwm->rate)
+		goto err_rate_put;
+	rzv2m_pwm->max_period = div64_u64(U64_MAX, rzv2m_pwm->rate);
+
+	/*
+	 * The registers other than the PWM interrupt register (PWMINT) are
+	 * always synchronized with PWM_CLK at regular intervals. It takes some
+	 * time (Min: 2 × PCLK + 4 × PWM_CLK to Max: 6 × PCLK + 9 × PWM_CLK) for
+	 * the value set in the register to be reflected in the PWM circuit
+	 * because there is a synchronizer between the register and the PWM
+	 * circuit.
+	 */
+	rzv2m_pwm->delay = 6 * DIV_ROUND_UP(NSEC_PER_SEC, apb_clk_rate) +
+		9 * DIV_ROUND_UP(NSEC_PER_SEC, rzv2m_pwm->rate);
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	/*
+	 *  We need to keep the clock on, in case the bootloader has enabled the
+	 *  PWM and is running during probe().
+	 */
+	if (!!(rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMCTR) & RZV2M_PWMCTR_PWME)) {
+		u32 val;
+
+		pm_runtime_get_sync(&pdev->dev);
+		rzv2m_pwm->is_ch_enabled = true;
+		rzv2m_pwm->pwm_cyc = rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMCYC);
+		val = rzv2m_pwm_read(rzv2m_pwm, RZV2M_PWMCTR);
+		rzv2m_pwm->polarity = FIELD_GET(RZV2M_PWMCTR_PWMHL, val) ?
+				PWM_POLARITY_NORMAL : PWM_POLARITY_INVERSED;
+	}
+
+	rzv2m_pwm->chip.dev = &pdev->dev;
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       rzv2m_pwm_reset_assert_pm_disable,
+				       rzv2m_pwm);
+	if (ret)
+		return ret;
+
+	rzv2m_pwm->chip.ops = &rzv2m_pwm_ops;
+	rzv2m_pwm->chip.npwm = 1;
+	ret = devm_pwmchip_add(&pdev->dev, &rzv2m_pwm->chip);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
+
+	pm_runtime_idle(&pdev->dev);
+
+	return 0;
+
+err_rate_put:
+	clk_rate_exclusive_put(rzv2m_pwm->pwm_clk);
+	clk_rate_exclusive_put(rzv2m_pwm->apb_clk);
+	clk_disable_unprepare(rzv2m_pwm->pwm_clk);
+disable_apb_clk:
+	clk_disable_unprepare(rzv2m_pwm->apb_clk);
+err_reset:
+	reset_control_assert(rzv2m_pwm->rstc);
+	return ret;
+}
+
+static const struct of_device_id rzv2m_pwm_of_table[] = {
+	{ .compatible = "renesas,rzv2m-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzv2m_pwm_of_table);
+
+static struct platform_driver rzv2m_pwm_driver = {
+	.driver = {
+		.name = "pwm-rzv2m",
+		.pm = pm_ptr(&rzv2m_pwm_pm_ops),
+		.of_match_table = rzv2m_pwm_of_table,
+	},
+	.probe = rzv2m_pwm_probe,
+};
+module_platform_driver(rzv2m_pwm_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_AUTHOR("Fabrizio Castro <fabrizio.castro.jz@renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/V2M PWM Timer Driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1