Received-SPF: pass (google.com: domain of linux-kernel+bounces-62775-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Nathan Morrisson <nmorrisson@phytec.com>
To: nm@ti.com,
	vigneshr@ti.com,
	kristo@kernel.org,
	robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org
Cc: devicetree@vger.kernel.org,
	upstream@lists.phytec.de,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	w.egorov@phytec.de
Subject: [PATCH v3] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
Date: Mon, 12 Feb 2024 16:52:48 -0800
Message-Id: <20240213005248.1027842-1-nmorrisson@phytec.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0:
	=?us-ascii?Q?pJ3eEvKFvvEw67YOJ6yvPOl+B6PEkHXltPhxmhjWAEwv4i+p5igWpK55yCeA?=
 =?us-ascii?Q?XIPfbRlRUM7poRoDWG6OiWhOniAxFFph4rIHmMkCN/JSdM5hyKBimOAJ5Plq?=
 =?us-ascii?Q?lyEn7o+jwqW96y0G1qNG/LI/T8lqsFNwlahkYlZ8vFsJVqfn1ATK54k7lll6?=
 =?us-ascii?Q?ZAfJb06ebrAs/+OCvMtK00NOGK/K4GwTetYK0Lli3rzmf9h+givhlfmX0F92?=
 =?us-ascii?Q?/DLEGiSSzDctRiQGIezBKo5swhvgRpL6qbZT+XPSLifZa/fe44JoBB0/xmGG?=
 =?us-ascii?Q?oxj2HLUyAGn4G2pyeWiuv5Yj0wk0Okc/yysFYJGCefB8AUOxpzh1Jh6n3AOw?=
 =?us-ascii?Q?dccutbGjnPq86A6p5gCfuZdDsCuJ3BGxbxEzbJw3WdLxO02mrjoUKivb+aAn?=
 =?us-ascii?Q?L5Jwz5Rnd+6cySxi0LxOtqEMTPYfqE9POSAHCbsPH/ashBRYR8GwsS0BYnhB?=
 =?us-ascii?Q?ieXSbqDMOdtdrjD0Y+TX0+Aq3l1oLTtX9hFpTdpyLkd2H8gsGl71GFUh2kh3?=
 =?us-ascii?Q?4jQthvsg2QVUIhV9UoBUNuCS5nm6mGkDB9XpOpR8mN5nCwO3W945DDSxWaRL?=
 =?us-ascii?Q?GGtR5TQgglNp6+65ppr/MaNpRUWHlZc7okjJRBoLZoiddy8rmacaDZMApXNw?=
 =?us-ascii?Q?oAPBUAIPMd/aPDriJbKNrw4XuDUCijtrw8vgYychA6mUCZPUA9krdA/1i0Ph?=
 =?us-ascii?Q?rgsFk5so+sFj+jgTF4VVXPyGSZGIzZWNJOA5Uxfv6oWZ7RK5Pzu22+B7euMT?=
 =?us-ascii?Q?fBZTbn/xPzvjCkfk7XS0GuaSGifRL0KkT5cg+IxdQtmw0kg4UfXT/cXL+zpq?=
 =?us-ascii?Q?896B4Mjnej1MB5d82WXQxJa10oTeWdZsSKyjKS0h9TsJ+xIapicBCQpMq7Ko?=
 =?us-ascii?Q?bLx0CmFI8IOhzZuL59VvqoEX0IVPIJW2PFiWnc5co/UrJkgxr+ykNsRJMowC?=
 =?us-ascii?Q?8RY3KcYn/TD9ekV2EoZZ33ChNLU5Z9bpjPaH2WPo8GO9Der+zF4xZ3ckVCTc?=
 =?us-ascii?Q?pH9g0bxLLS9r0GS4/qhgZO13zIxSikXifDF9GKXDqcbyR7qistSnQJCELkKX?=
 =?us-ascii?Q?RUEHCEteiUlBDNGI0C2Z/ZpENh9iag8sqrjME4yfwaDsmq7uiGjipf8ewH1F?=
 =?us-ascii?Q?shQPiq0B9GQIlqwvfP6XoBjADvBIk+eKg953vkXbb/bMmWB9QExgKZ7CqhZX?=
 =?us-ascii?Q?WV1k+luU/aAauidjFgRXsOkbJjKfKn2kqc6ie47l/y4DpRgQo7qPk6OZJ6wP?=
 =?us-ascii?Q?fQZJ/hC8aXoWHzxB1Py2EAxaQwNW8GUJNm5udi90OmqABqBleX1W/kqs/MW+?=
 =?us-ascii?Q?e25RQcdmc5Pv6Nos9DXp90AcHjHrwcXXpsaAITxMgq/+v9jlTAFN/mP/6UBw?=
 =?us-ascii?Q?jX98ySrWR2CjZqOvGr4yMP6r+IyOk5gDdHnVa5waXVeOOA+UQV6xUk4sJ89G?=
 =?us-ascii?Q?/nYsWDQKpXyVH2dAnlyG7HVqQe3B+s9Mi35DO/f9NYFDTceGAGq7kKxYZWyV?=
 =?us-ascii?Q?jnub6JNYuG1iy2V8M+bwzsE57I5Crt+LGkthJwWXiCgtOZqRddejThkjd4PB?=
 =?us-ascii?Q?5fvYQi/UhpAYV9LieJNn5UnQerypqSsEsHnTC9Dz?=
X-OriginatorOrg: phytec.com
X-MS-Exchange-CrossTenant-Network-Message-Id: 3d1a2dcf-8d19-448c-6ca5-08dc2c2e1fc8
X-MS-Exchange-CrossTenant-AuthSource: SA1PR22MB5636.namprd22.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 Feb 2024 00:52:59.4319
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 67bcab1a-5db0-4ee8-86f4-1533d0b4b5c7
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: M0FEdp7mOJ9K+xx5weKRGwm3ecdWRLxDWVECqlI7UCSdjEkgxFm7adLSJHb0TCz38E+X+oMzfEb/Llq05+nqYw==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH7PR22MB5397

The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
header and sets the fan to turn on at 65C.

Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
---
v3:
- Remove fan status okay

v2:
- Change overlay name from k3-am62-... to k3-am62x-...
- Add compile time test

 arch/arm64/boot/dts/ti/Makefile               |  3 ++
 .../ti/k3-am62x-phyboard-lyra-gpio-fan.dtso   | 50 +++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 52c1dc910308..bfeb496d5039 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 
 # Boards with AM62Ax SoC
@@ -87,6 +88,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
 	k3-am625-beagleplay-csi2-ov5640.dtbo
 k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
 	k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+	k3-am62x-phyboard-lyra-gpio-fan.dtbo
 k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-imx219.dtbo
 k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
new file mode 100644
index 000000000000..f0b2fd4165a7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_fan_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	gpio_fan_pins_default: gpio-fan-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+		>;
+	};
+};
+
+&thermal_zones {
+	main0_thermal: main0-thermal {
+		trips {
+			main0_thermal_trip0: main0-thermal-trip {
+				temperature = <65000>;  /* millicelsius */
+				hysteresis = <2000>;    /* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_thermal_trip0>;
+				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
-- 
2.25.1