Received-SPF: pass (google.com: domain of linux-kernel+bounces-64575-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
CC: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero
 Kristo <kristo@kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, Wadim Egorov
	<w.egorov@phytec.de>,
        Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
Date: Tue, 13 Feb 2024 17:56:53 -0600
Message-ID: <20240213235701.2438513-2-jm@ti.com>
In-Reply-To: <20240213235701.2438513-1-jm@ti.com>
References: <20240213235701.2438513-1-jm@ti.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

From: Nitin Yadav <n-yadav@ti.com>

Add sdhci0 DT node in k3-am62a-main for eMMC support. Add otap/itap
values according to the datasheet[0], refer to Table 7-79.

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since V3:
- No change
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 972971159a62..ce5f278235a4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -536,6 +536,24 @@ main_gpio1: gpio@601000 {
 		status = "disabled";
 	};
 
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 6>;
+		assigned-clock-parents = <&k3_clks 57 8>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		status = "disabled";
+	};
+
 	sdhci1: mmc@fa00000 {
 		compatible = "ti,am62-sdhci";
 		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
-- 
2.43.0