Received-SPF: pass (google.com: domain of linux-kernel+bounces-64856-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Mihai Sain <mihai.sain@microchip.com>
To: <claudiu.beznea@tuxon.dev>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<andre.przywara@arm.com>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>
CC: <cristian.birsan@microchip.com>, Mihai Sain <mihai.sain@microchip.com>
Subject: [PATCH v2 2/3] ARM: dts: microchip: sama7g5: Add flexcom 10 node
Date: Wed, 14 Feb 2024 10:03:47 +0200
Message-ID: <20240214080348.7540-3-mihai.sain@microchip.com>
In-Reply-To: <20240214080348.7540-1-mihai.sain@microchip.com>
References: <20240214080348.7540-1-mihai.sain@microchip.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7g5.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..c90e404e8ed9 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -958,6 +958,32 @@ i2c9: i2c@600 {
 			};
 		};
 
+		flx10: flexcom@e2820000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(25)>,
+					<&dma0 AT91_XDMAC_DT_PERID(26)>;
+				dma-names = "rx", "tx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
 		flx11: flexcom@e2824000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
-- 
2.43.0