Received-SPF: pass (google.com: domain of linux-kernel+bounces-68152-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Tudor Ambarus <tudor.ambarus@linaro.org>
To: broonie@kernel.org,
	robh@kernel.org,
	andi.shyti@kernel.org,
	krzysztof.kozlowski@linaro.org,
	semen.protsenko@linaro.org,
	conor+dt@kernel.org
Cc: alim.akhtar@samsung.com,
	linux-spi@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	andre.draszik@linaro.org,
	peter.griffin@linaro.org,
	kernel-team@android.com,
	willmcvicker@google.com,
	devicetree@vger.kernel.org,
	Tudor Ambarus <tudor.ambarus@linaro.org>
Subject: [PATCH v3 11/12] spi: s3c64xx: switch gs101 to new port config data
Date: Fri, 16 Feb 2024 07:05:54 +0000
Message-ID: <20240216070555.2483977-12-tudor.ambarus@linaro.org>
In-Reply-To: <20240216070555.2483977-1-tudor.ambarus@linaro.org>
References: <20240216070555.2483977-1-tudor.ambarus@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.

Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. GS101 integrates 16 SPI
  IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
  masks is misleading and can hide problems of the driver logic.

S3C64XX_SPI_ST_TX_FIFO_RDY_V2 was defined based on the USI's
SPI_VERSION.USI_IP_VERSION register field, which has value 2 at reset.

MAX_SPI_PORTS is updated to reflect the maximum number of ports for the
rest of the compatibles.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 128f4a7c4bd9..784786407d2e 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -20,7 +20,7 @@
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 
-#define MAX_SPI_PORTS		16
+#define MAX_SPI_PORTS		12
 #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
 #define AUTOSUSPEND_TIMEOUT	2000
 
@@ -79,6 +79,8 @@
 #define S3C64XX_SPI_INT_RX_FIFORDY_EN		(1<<1)
 #define S3C64XX_SPI_INT_TX_FIFORDY_EN		(1<<0)
 
+#define S3C64XX_SPI_ST_RX_FIFO_RDY_V2		GENMASK(23, 15)
+#define S3C64XX_SPI_ST_TX_FIFO_RDY_V2		GENMASK(14, 6)
 #define S3C64XX_SPI_ST_TX_FIFO_LVL_SHIFT	6
 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR		(1<<5)
 #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR		(1<<4)
@@ -1615,11 +1617,9 @@ static const struct s3c64xx_spi_port_config fsd_spi_port_config = {
 };
 
 static const struct s3c64xx_spi_port_config gs101_spi_port_config = {
-	/* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */
-	.fifo_lvl_mask	= { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
-			    0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},
-	/* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */
-	.rx_lvl_offset	= 15,
+	.fifo_depth	= 64,
+	.rx_fifomask	= S3C64XX_SPI_ST_RX_FIFO_RDY_V2,
+	.tx_fifomask	= S3C64XX_SPI_ST_TX_FIFO_RDY_V2,
 	.tx_st_done	= 25,
 	.clk_div	= 4,
 	.high_speed	= true,
-- 
2.44.0.rc0.258.g7320e95886-goog