Received-SPF: pass (google.com: domain of linux-kernel+bounces-68673-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Vaishnav Achath <vaishnav.a@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>
CC: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <vaishnav.a@ti.com>, <u-kumar1@ti.com>,
        <s-vadapalli@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
Date: Fri, 16 Feb 2024 19:25:33 +0530
Message-ID: <20240216135533.904130-3-vaishnav.a@ti.com>
In-Reply-To: <20240216135533.904130-1-vaishnav.a@ti.com>
References: <20240216135533.904130-1-vaishnav.a@ti.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

J722S EVM has S28HS512T 64 MiB Octal SPI NOR flash connected
to the OSPI interface, add support for the flash and describe
the partition information as per bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 79 +++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 9e12a6e9111f..b1c6499c0c9d 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -169,6 +169,23 @@ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
 	};
 
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */
+			J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */
+			J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */
+			J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */
+			J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */
+			J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */
+			J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */
+			J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */
+			J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */
+			J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */
+			J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+
 	rgmii1_pins_default: rgmii1-default-pins {
 		pinctrl-single,pins = <
 			J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
@@ -290,6 +307,68 @@ exp1: gpio@23 {
 	};
 };
 
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x00 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+
+};
+
 &sdhci1 {
 	/* SD/MMC */
 	vmmc-supply = <&vdd_mmc1>;
-- 
2.34.1