Received-SPF: pass (google.com: domain of linux-kernel+bounces-70028-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
To: linux-kernel@vger.kernel.org
Cc: Ondrej Jirman <megi@xff.cz>,
	Pavel Machek <pavel@ucw.cz>,
	Lee Jones <lee@kernel.org>,
	=?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>,
	Raymond Hackley <raymondhackley@protonmail.com>,
	Luca Weiss <luca@z3ntu.xyz>,
	linux-leds@vger.kernel.org (open list:LED SUBSYSTEM)
Subject: [PATCH] leds: sgm3140: Add missing timer cleanup and flash gpio control
Date: Sat, 17 Feb 2024 20:11:30 +0100
Message-ID: <20240217191133.1757553-1-megi@xff.cz>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Ondrej Jirman <megi@xff.cz>

Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).

Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
I also have a sense the driver has other issues, like running regulator_disable
in atomic context, and lacking locking in general. But that's for another time.

I don't think this device is typically used from multiple threads/processes.
But writing strobe = 1 and then brightness = 0 affects real usecases.

 drivers/leds/flash/leds-sgm3140.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/leds/flash/leds-sgm3140.c b/drivers/leds/flash/leds-sgm3140.c
index eb648ff54b4e..db0ac6641954 100644
--- a/drivers/leds/flash/leds-sgm3140.c
+++ b/drivers/leds/flash/leds-sgm3140.c
@@ -114,8 +114,11 @@ static int sgm3140_brightness_set(struct led_classdev *led_cdev,
 				"failed to enable regulator: %d\n", ret);
 			return ret;
 		}
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 1);
 	} else {
+		del_timer_sync(&priv->powerdown_timer);
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 0);
 		ret = regulator_disable(priv->vin_regulator);
 		if (ret) {
-- 
2.43.0