Received-SPF: pass (google.com: domain of linux-kernel+bounces-72421-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Alex Soo <yuklin.soo@starfivetech.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
	Hal Feng <hal.feng@starfivetech.com>,
	Ley Foon Tan <leyfoon.tan@starfivetech.com>,
	Jianlong Huang <jianlong.huang@starfivetech.com>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Drew Fustini <drew@beagleboard.org>
Cc: linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alex Soo <yuklin.soo@starfivetech.com>
Subject: [RFC PATCH v2 4/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_gmac domain
Date: Tue, 20 Feb 2024 14:42:44 +0800
Message-ID: <20240220064246.467216-5-yuklin.soo@starfivetech.com>
In-Reply-To: <20240220064246.467216-1-yuklin.soo@starfivetech.com>
References: <20240220064246.467216-1-yuklin.soo@starfivetech.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0:
	=?us-ascii?Q?MRKU/JxJKHZ+mBG+7op2SCNXXcvcZtJhRbbTv5hTgwttbmIQRaLIaktzPQsC?=
 =?us-ascii?Q?7PFgheKCcudsHPKfu8FxxYny+vbhUCxEL6Vetmj1D1Ki8tiWtUQLzTcn4p2r?=
 =?us-ascii?Q?ZsLyjHp47e8sThez2j727cTXZqqGQF819a6DGvLSEhA+4DMgV5DzZh5jYjwP?=
 =?us-ascii?Q?3adEyVi2phYvzoPDqfG+sMCjfBgZjiqXTJbCbr7OXcXIr4NQxwnW00Uk6ORH?=
 =?us-ascii?Q?I+BO3q8GPDwG7/EKxWlM8s8fMmC+iHtaH4R2DrJn5tVCR2MV7iQhnFOiKoHj?=
 =?us-ascii?Q?Nz6d48SukXPFfMLcMEJ04L8nlwI1VwKq183MCu77chDj3Psdp7+3+eHTUcpF?=
 =?us-ascii?Q?gyqo7SeolwlLp/8tiQyz9C5RPq8EHe1rQVxwlNLLBpScVZK0/m3z4MRP8uNE?=
 =?us-ascii?Q?X6MIsBZGqVNN/K+WoHe2SJ3dvWE6fuPwaqcJrJJKCgFSY0g9nsWbdyxJyrtc?=
 =?us-ascii?Q?jPN/T/iz4fqbSUNzJFdDt0aJQR2CFBroPqgvytjCcA5KF8Z+BYlcSCvYZyqX?=
 =?us-ascii?Q?wFtwu7yKLv/rQhW34RFoeVdLlZRednFrEgNWpgxcylSaSiWIfacB5ZeJNdy6?=
 =?us-ascii?Q?xvDZnBis4xJ6amOkzqcqSwT/GspM6e1cXitQMVHfaq3fwr1bT/OZ2Gqlgggn?=
 =?us-ascii?Q?1hqPDGIkLUqWRkkfHIGxQ+GCs2o8L/t29OfjM8XPfVwsyxE+eA/2U+3S1exg?=
 =?us-ascii?Q?qwOVD5dKbQutg0SPrQ7hIAeaEH68Vap//4q4irEKmL06rcGog1KIRWVZytoH?=
 =?us-ascii?Q?2hhmwe0d9D7rtLqF0iEWWFNWJ5a+Sjvo+6pHcRc5wlYFsQ/aduPJT394PmoG?=
 =?us-ascii?Q?DNE/1lbPOUXfeVuLZvZ0Ei6hY2sUeMA1vzY8zN6AFJGdQsPxKNFWgVjTGfGo?=
 =?us-ascii?Q?bigRWRADSyXY+WS+YDI4bUHcrNzjv26e7a0SYZ/ECVtFdm4DWjc6ZUAJAvvj?=
 =?us-ascii?Q?eJ0m/dw48aNnOuSlZZECC2x6CBtRBJOtKk9wLJ2oSLv/KsFZrW4wRxd6izY9?=
 =?us-ascii?Q?x2GplxAXonutF5QMySiZY7Hr2VfiP3qxsISBD2CgnIY9hQrICpeXnuXWBbrN?=
 =?us-ascii?Q?NmMndVuA6wU503ox6j6BLiIxHsLHnkigfP4BglvrVQUst9YtKfoy18r2hqvO?=
 =?us-ascii?Q?9hm7sVfVEg8Sa1iylSbKjIpIoRXUBUinVXqCnvu7VwznZP7BtIMocA9m1NAF?=
 =?us-ascii?Q?Ji2mkabnL9v9IswKTTfmP3B13+Sn/yMk7oFzVrF4c8y7bYIqv5hsiQRmS3Hm?=
 =?us-ascii?Q?tajiHoFSgu53duJT64Ivk3fr3+QH4VGoeNq3Sd1JcbpcZU3JK6/4bwgnJYsy?=
 =?us-ascii?Q?WWzff24mzz9cYVTQA+IAqjNcm5qCc2wptNb7ugqQ6Bdq+JetdJtd9XHLcvFd?=
 =?us-ascii?Q?91mMw1sgO45jlHcbk6Wkw/sEAZ/Ut8ENgPChz4vmQw58ovbtuXALGd0Yvv9r?=
 =?us-ascii?Q?Z0JBI5gnetyQ/Qz0BsGDYVgbHVUtrQgIj4zS8BpFNvb3XLSFSjcEiJ10KyTC?=
 =?us-ascii?Q?/edUx+J0NTRCTXUEErOdD2alvWGDo2WfM2COxki7sVeOlhgzdTXdbsNklQC7?=
 =?us-ascii?Q?g9Sxrx9unhuD8nJEO6aisaA83O8//ATDRuf79JgU2Dh+1SytKMIhaJoLFd+x?=
 =?us-ascii?Q?yg=3D=3D?=
X-OriginatorOrg: starfivetech.com
X-MS-Exchange-CrossTenant-Network-Message-Id: 720988c2-79e5-43d2-3993-08dc31df345b
X-MS-Exchange-CrossTenant-AuthSource: ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Feb 2024 06:43:10.7775
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 06fe3fa3-1221-43d3-861b-5a4ee687a85c
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: UuCPqp11m+6rREWDGYgOTZd916FDEh5p5tpnpyCD99oo3y7LQ3WRHNRBAUVxQBhe2xewekQY9EOyez8vJKgIc3zeO500Mf4pWyz1/VsQXzE=
X-MS-Exchange-Transport-CrossTenantHeadersStamped: ZQ0PR01MB1239

Add pinctrl driver for sys_gmac domain.

Signed-off-by: Alex Soo <yuklin.soo@starfivetech.com>
---
 drivers/pinctrl/starfive/Kconfig              | 12 +++
 drivers/pinctrl/starfive/Makefile             |  1 +
 .../pinctrl-starfive-jh8100-sys-gmac.c        | 93 +++++++++++++++++++
 .../starfive/pinctrl-starfive-jh8100.h        |  3 +
 4 files changed, 109 insertions(+)
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c

diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
index d78f161a636c..bc123c0bf35e 100644
--- a/drivers/pinctrl/starfive/Kconfig
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -82,3 +82,15 @@ config PINCTRL_STARFIVE_JH8100_SYS_WEST
 	  This also provides an interface to the GPIO pins not used by other
 	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
 	  and interrupts on input changes.
+
+config PINCTRL_STARFIVE_JH8100_SYS_GMAC
+	tristate "StarFive JH8100 SoC System IOMUX-GMAC pinctrl and GPIO driver"
+	depends on ARCH_STARFIVE  || COMPILE_TEST
+	depends on OF
+	select PINCTRL_STARFIVE_JH8100
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support system iomux-gmac pin control on the StarFive JH8100 SoC.
+	  This provides syscon registers to indicate voltage level on SDIO1/GMAC1, to indicate
+	  GMAC1 pads voltage level under different GMAC interface modes, and to configure
+	  GMAC1 interface slew rate.
diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
index 784465157ae2..236a693a8aef 100644
--- a/drivers/pinctrl/starfive/Makefile
+++ b/drivers/pinctrl/starfive/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_STARFIVE_JH7110_AON)	+= pinctrl-starfive-jh7110-aon.o
 obj-$(CONFIG_PINCTRL_STARFIVE_JH8100)		+= pinctrl-starfive-jh8100.o
 obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_EAST)	+= pinctrl-starfive-jh8100-sys-east.o
 obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_WEST)	+= pinctrl-starfive-jh8100-sys-west.o
+obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_GMAC)	+= pinctrl-starfive-jh8100-sys-gmac.o
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
new file mode 100644
index 000000000000..be0d238be08c
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-gmac.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Pinctrl / GPIO driver for StarFive JH8100 SoC sys gmac controller
+ *
+ * Copyright (C) 2023-2024 StarFive Technology Co., Ltd.
+ * Author: Alex Soo <yuklin.soo@starfivetech.com>
+ *
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/pinctrl/starfive,jh8100-pinctrl.h>
+
+#include "../core.h"
+#include "../pinmux.h"
+#include "../pinconf.h"
+#include "pinctrl-starfive-jh8100.h"
+
+#define JH8100_SYS_G_NGPIO			0
+#define JH8100_SYS_G_GC_BASE			-1
+#define JH8100_SYS_G_DOMAIN_NAME		"jh8100-sys-gmac"
+
+#ifdef CONFIG_PM_SLEEP
+static int jh8100_sys_gmac_pinctrl_suspend(struct device *dev)
+{
+	struct jh8100_pinctrl *sfp;
+	int i;
+
+	sfp = dev_get_drvdata(dev);
+	if (!sfp)
+		return -EINVAL;
+
+	for (i = 0; i < sfp->info->nregs; i++)
+		sfp->jh8100_sys_gmac_regs[i] = readl_relaxed(sfp->base + (i * 4));
+
+	return pinctrl_force_sleep(sfp->pctl);
+}
+
+static int jh8100_sys_gmac_pinctrl_resume(struct device *dev)
+{
+	struct jh8100_pinctrl *sfp;
+	int i;
+
+	sfp = dev_get_drvdata(dev);
+	if (!sfp)
+		return -EINVAL;
+
+	for (i = 0; i < sfp->info->nregs; i++)
+		writel_relaxed(sfp->jh8100_sys_gmac_regs[i], sfp->base + (i * 4));
+
+	return pinctrl_force_default(sfp->pctl);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(jh8100_sys_gmac_pinctrl_dev_pm_ops,
+			 jh8100_sys_gmac_pinctrl_suspend,
+			 jh8100_sys_gmac_pinctrl_resume);
+
+static const struct jh8100_pinctrl_domain_info jh8100_sys_gmac_pinctrl_info = {
+	.ngpios		= JH8100_SYS_G_NGPIO,
+	.gc_base	= JH8100_SYS_G_GC_BASE,
+	.name		= JH8100_SYS_G_DOMAIN_NAME,
+	.nregs		= JH8100_SYS_G_REG_NUM,
+};
+
+static const struct of_device_id jh8100_sys_gmac_pinctrl_of_match[] = {
+	{
+		.compatible = "starfive,jh8100-sys-pinctrl-gmac",
+		.data = &jh8100_sys_gmac_pinctrl_info,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh8100_sys_gmac_pinctrl_of_match);
+
+static struct platform_driver jh8100_sys_gmac_pinctrl_driver = {
+	.probe = jh8100_pinctrl_probe,
+	.driver = {
+		.name = "starfive-jh8100-sys-pinctrl-gmac",
+#ifdef CONFIG_PM_SLEEP
+		.pm = &jh8100_sys_gmac_pinctrl_dev_pm_ops,
+#endif
+		.of_match_table = jh8100_sys_gmac_pinctrl_of_match,
+	},
+};
+module_platform_driver(jh8100_sys_gmac_pinctrl_driver);
+
+MODULE_DESCRIPTION("Pinctrl driver for StarFive JH8100 SoC sys gmac controller");
+MODULE_AUTHOR("Alex Soo <yuklin.soo@starfivetech.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
index 92d3b5d6de40..4652885feaa2 100644
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
@@ -15,9 +15,11 @@
 
 #define JH8100_SYS_W_DOMAIN_NAME	"jh8100-sys-west"
 #define JH8100_SYS_E_DOMAIN_NAME	"jh8100-sys-east"
+#define JH8100_SYS_G_DOMAIN_NAME	"jh8100-sys-gmac"
 
 #define JH8100_SYS_W_REG_NUM		44
 #define JH8100_SYS_E_REG_NUM		116
+#define JH8100_SYS_G_REG_NUM		19
 
 #define JH8100_SYS_W_GPO_PDA_00_15_CFG	0x074
 #define JH8100_SYS_E_GPO_PDA_00_47_CFG	0x114
@@ -34,6 +36,7 @@ struct jh8100_pinctrl {
 	const struct jh8100_pinctrl_domain_info *info;
 	unsigned int jh8100_sys_west_regs[JH8100_SYS_W_REG_NUM];
 	unsigned int jh8100_sys_east_regs[JH8100_SYS_E_REG_NUM];
+	unsigned int jh8100_sys_gmac_regs[JH8100_SYS_G_REG_NUM];
 	/* wakeup */
 	int wakeup_gpio;
 	int wakeup_irq;
-- 
2.43.0