Received-SPF: pass (google.com: domain of linux-kernel+bounces-72522-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Alex Soo <yuklin.soo@starfivetech.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
	Hal Feng <hal.feng@starfivetech.com>,
	Ley Foon Tan <leyfoon.tan@starfivetech.com>,
	Jianlong Huang <jianlong.huang@starfivetech.com>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Drew Fustini <drew@beagleboard.org>
Cc: linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alex Soo <yuklin.soo@starfivetech.com>
Subject: [RFC PATCH v2 6/6] riscv: dts: starfive: jh8100: add pinctrl device tree nodes
Date: Tue, 20 Feb 2024 14:42:46 +0800
Message-ID: <20240220064246.467216-7-yuklin.soo@starfivetech.com>
In-Reply-To: <20240220064246.467216-1-yuklin.soo@starfivetech.com>
References: <20240220064246.467216-1-yuklin.soo@starfivetech.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0:
	=?us-ascii?Q?KVl5P8DHnjLqxs9V9eu0jlvQfyC/uhXlbhpj6d7ZKHp6wc0XoKtMyLV/IJCu?=
 =?us-ascii?Q?d92jnHYwOeWfxKvvm+2F82jbv8wG2BxFd8lQUp32RRgohutlmuljzXsShlHu?=
 =?us-ascii?Q?AjZrhHyi7e+GPekE+pze23r6Gkmvt7UBi3oFyjeNrkNhKYWHGo5tNKc09JNJ?=
 =?us-ascii?Q?4+so8ATMZ+S+vvYGXZjTILB8xGhjW9/UNz97f8V+/WpZLvnoqf6AcaML9YLU?=
 =?us-ascii?Q?+5TcMkj2hn304dJp1mLD59OK/a9RCSiqGgSwPE9G7j0lvKtTVgsHJSH1O3A7?=
 =?us-ascii?Q?+CIveH39EXlTbKQOMikOMIxbs4A+6H3bUEq9CswfXNIg18dZEWZgnqfYIYCi?=
 =?us-ascii?Q?XpVb0VLa6od4mXjD10h566MG88Yvc5RENHcoJ0jDXf8ryRVvf0tLfb9SGICC?=
 =?us-ascii?Q?iKYBSnEDBNhL2g9VFHKu1nm/etgTlRi4OlUqEAia0MCkm81zAfE0PJx0FK5q?=
 =?us-ascii?Q?LfsRPTzAYWV/2X1pHy/4vE47bPZUnmcTkaXKgGLqRRcIDqLV3YYqGRfmtDTf?=
 =?us-ascii?Q?0p6H48Rezsy3niYrb1YLb42yAHYldeCLOn/qNuTyckZi0UpVRuzhiRymlH9z?=
 =?us-ascii?Q?JGajbfR5zscQvbgEKa11nn04WGFU+ThsFJxfc6RY19jvxFCBX5ygC/60yH4r?=
 =?us-ascii?Q?HFid8IDpJX5HmCKkQw0/LyhFWaA9h9zYYtNz9hB919D4Y/XlqVtHqsszWKK1?=
 =?us-ascii?Q?zt43tQluo1qXCDroZ4zm6w98oFBjaLyqJZZroGpohFiztdP8cahBXwBrHKBb?=
 =?us-ascii?Q?ClT5DFOQDDGTXtjKcx6FSUqCfZK0itM61Vkfy7qHNwaHLyaya1OYdR5cxhnK?=
 =?us-ascii?Q?JR9eqwYwmkc4xgqCBHpBVyT04ZDd3UzPnlvjNjE7rG7nlcepoy5cWzRN8H7X?=
 =?us-ascii?Q?0Wsz7R4/xHRkkQhIGRsR1H9tTlYoPNBOGnH1lXEUnriwt5iTgyDrp7yjvfx5?=
 =?us-ascii?Q?SknrlqArlhWLsQhOfe7UV2+BaWsmHUMcsc07Oqt7upY0YKyuFjlwagQ6mJoL?=
 =?us-ascii?Q?VXfQK3J+lekQq4OaTuWZqi7DRfOKinWUAoKTUmbKlHu6OKxdzeT78xuf4BaU?=
 =?us-ascii?Q?mXP/GWxlBh9CzzztdqNcfutCo4n5VzKiOxZa2CQqbbThrJAvoOt7R++NBTEr?=
 =?us-ascii?Q?7phl/TLriAhgydIIrXP2CE1NCQ5gjuk4csGEBg6hHjjGx9vy3m57wlokcb6K?=
 =?us-ascii?Q?tSnV/G8VbnFjVRt0VdoL8cm9Xo9Cet1VCTC1it4OUwlmWIHrH0r7r00D+hBq?=
 =?us-ascii?Q?YMUQbCN6F7U6Of5ZJrh/mndSeAd88MtfmZvKC+NW11l6CeWqTL54Y0b9FfJH?=
 =?us-ascii?Q?5Ksvm1RHemNtivzMVZqrhzCnacMdrVlgJjMKMku38bpG9UCT8C1LkS6P7lYe?=
 =?us-ascii?Q?5mXBxF6RyWedFE2sJZ+Zj1qRCv9IvSwcXI6jBCcwt8XYHO4YhU85TVtwplMY?=
 =?us-ascii?Q?Sse9XF63NjMAhEnpsbBpJv1y7E4fKo1kLo1Uu7vY0SsbegP2p36ff1oOggfB?=
 =?us-ascii?Q?Q//R16drHbJwx23bVflw7Piqb+EvK/Gxv9nH0J9aPbECbeR+SV4p6hvENih0?=
 =?us-ascii?Q?MfBOcgA/eJyBjC9C4KN6V5+UATsJtqsRT9EylHeA6exqVqlW4EmxjhkJ9qcT?=
 =?us-ascii?Q?DQ=3D=3D?=
X-OriginatorOrg: starfivetech.com
X-MS-Exchange-CrossTenant-Network-Message-Id: d22b807d-d043-456b-6572-08dc31df3817
X-MS-Exchange-CrossTenant-AuthSource: ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Feb 2024 06:43:17.0433
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 06fe3fa3-1221-43d3-861b-5a4ee687a85c
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: gE+DavRHaAdBBIw0zfyR2Ku90neIXskGR++LNzZSw8LAmOuuuCYX06WldEL3UcbFyJFhihW+ho6YsxKIyxhxf19te5Jp2SuJqLDYYtXocTc=
X-MS-Exchange-Transport-CrossTenantHeadersStamped: ZQ0PR01MB1286

Add pinctrl_east/pinctrl_west/pinctrl_gmac/pinctrl_aon device
tree nodes for JH8100 SoC.

Signed-off-by: Alex Soo <yuklin.soo@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh8100-evb.dts   |   5 +
 arch/riscv/boot/dts/starfive/jh8100-pinfunc.h | 418 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh8100.dtsi      |  47 ++
 3 files changed, 470 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh8100-pinfunc.h

diff --git a/arch/riscv/boot/dts/starfive/jh8100-evb.dts b/arch/riscv/boot/dts/starfive/jh8100-evb.dts
index c16bc25d8988..270a4bfa137a 100644
--- a/arch/riscv/boot/dts/starfive/jh8100-evb.dts
+++ b/arch/riscv/boot/dts/starfive/jh8100-evb.dts
@@ -26,3 +26,8 @@ memory@40000000 {
 &uart0 {
 	status = "okay";
 };
+
+&pinctrl_aon {
+	wakeup-gpios = <&pinctrl_aon PAD_RGPIO1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh8100-pinfunc.h b/arch/riscv/boot/dts/starfive/jh8100-pinfunc.h
new file mode 100644
index 000000000000..3fb16ef62d90
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh8100-pinfunc.h
@@ -0,0 +1,418 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ * Author: Alex Soo <yuklin.soo@starfivetech.com>
+ *
+ */
+
+#ifndef __JH8100_PINFUNC_H__
+#define __JH8100_PINFUNC_H__
+
+/*
+ * mux bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 10 |  9 - 8   |  7 - 0  |
+ *  |  din    |  dout   |  doen   | function | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * function:
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((din)  & 0xff) << 24) | \
+		(((dout) & 0xff) << 16) | \
+		(((doen) & 0x3f) << 10) | \
+		((n) & 0x3f))
+
+#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff))
+
+/* sys_iomux_east dout */
+#define GPOUT_LOW				0
+#define GPOUT_HIGH				1
+#define GPOUT_SYS_CAN0_STBY			2
+#define GPOUT_SYS_CAN0_TST_NEXT_BIT		3
+#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT		4
+#define GPOUT_SYS_CAN0_TXD			5
+#define GPOUT_SYS_I2C0_CLK			6
+#define GPOUT_SYS_I2C0_DATA			7
+#define GPOUT_SYS_I2S0_STEREO_RSCKO		8
+#define GPOUT_SYS_I2S0_STEREO_RWSO		9
+#define GPOUT_SYS_I2S0_STEREO_SDO_0		10
+#define GPOUT_SYS_I2S0_STEREO_SDO_1		11
+#define GPOUT_SYS_I2S0_STEREO_TSCKO		12
+#define GPOUT_SYS_I2S0_STEREO_TWSO		13
+#define GPOUT_SYS_SPI0_MO			14
+#define GPOUT_SYS_SPI0_SS0			15
+#define GPOUT_SYS_SPI0_SS1			16
+#define GPOUT_SYS_SPI0_SS2			17
+#define GPOUT_SYS_SPI0_SS3			18
+#define GPOUT_SYS_SPI0_SCLK			19
+#define GPOUT_SYS_SPI0_SO			20
+#define GPOUT_SYS_UART0_DTR			21
+#define GPOUT_SYS_UART0_RTS			22
+#define GPOUT_SYS_UART0_TX			23
+#define GPOUT_SYS_USB0_DBG_DRIVE_VBUS		24
+#define GPOUT_SYS_PDM_MCLK			25
+#define GPOUT_SYS_PWM_CHANNEL0			26
+#define GPOUT_SYS_PWM_CHANNEL1			27
+#define GPOUT_SYS_PWM_CHANNEL2			28
+#define GPOUT_SYS_PWM_CHANNEL3			29
+#define GPOUT_SYS_PWM_CHANNEL4			30
+#define GPOUT_SYS_PWM_CHANNEL5			31
+#define GPOUT_SYS_PWM_CHANNEL6			32
+#define GPOUT_SYS_PWM_CHANNEL7			33
+#define GPOUT_SYS_SMBUS0_CLK			34
+#define GPOUT_SYS_SMBUS0_DATA			35
+#define GPOUT_SYS_SMBUS0_SUSPEND		36
+#define GPOUT_SYS_CLK_GCLK1			37
+#define GPOUT_SYS_CLK_GCLK2			38
+#define GPOUT_SYS_CLK_GCLK3			39
+#define GPOUT_SYS_CLK_GCLK4			40
+#define GPOUT_SYS_CLK_GCLK6			41
+#define GPOUT_SYS_CLK_GCLK7			42
+#define GPOUT_SYS_MCLK				43
+#define GPOUT_SYS_USB0_TYPEC_DRIVE_VBUS		44
+#define GPOUT_SYS_WATCHDOG0_RESET		45
+#define GPOUT_SYS_CAN1_STBY			46
+#define GPOUT_SYS_CAN1_TST_NEXT_BIT		47
+#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT		48
+#define GPOUT_SYS_CAN1_TXD			49
+#define GPOUT_SYS_I2C1_CLK			50
+#define GPOUT_SYS_I2C1_DATA			51
+#define GPOUT_SYS_I2S1_RSCKO			52
+#define GPOUT_SYS_I2S1_RWSO			53
+#define GPOUT_SYS_I2S1_SDO0			54
+#define GPOUT_SYS_I2S1_SDO1			55
+#define GPOUT_SYS_I2S1_SDO2			56
+#define GPOUT_SYS_I2S1_SDO3			57
+#define GPOUT_SYS_I2S1_SDO4			58
+#define GPOUT_SYS_I2S1_SDO5			59
+#define GPOUT_SYS_I2S1_SDO6			60
+#define GPOUT_SYS_I2S1_SDO7			61
+#define GPOUT_SYS_I2S1_TSCKO			62
+#define GPOUT_SYS_I2S1_TWSO			63
+#define GPOUT_SYS_SDIO1_PU_PD_DATA2		64
+#define GPOUT_SYS_SDIO1_BUS_POWER		65
+#define GPOUT_SYS_SDIO1_RESET			66
+#define GPOUT_SYS_SDIO1_BUS_VOLTAGE_0		67
+#define GPOUT_SYS_SDIO1_BUS_VOLTAGE_1		68
+#define GPOUT_SYS_SDIO1_BUS_VOLTAGE_2		69
+#define GPOUT_SYS_SDIO1_LED			70
+#define GPOUT_SYS_SPI1_MO			71
+#define GPOUT_SYS_SPI1_SS0			72
+#define GPOUT_SYS_SPI1_SS1			73
+#define GPOUT_SYS_SPI1_SS2			74
+#define GPOUT_SYS_SPI1_SS3			75
+#define GPOUT_SYS_SPI1_SCLK			76
+#define GPOUT_SYS_SPI1_SO			77
+#define GPOUT_SYS_UART1_DTR			78
+#define GPOUT_SYS_UART1_RTS			79
+#define GPOUT_SYS_UART1_TX			80
+#define GPOUT_SYS_USB1_DBG_DRIVE_VBUS		81
+#define GPOUT_SYS_I2C2_CLK			82
+#define GPOUT_SYS_I2C2_DATA			83
+#define GPOUT_SYS_UART2_DTR			84
+#define GPOUT_SYS_UART2_RTS			85
+#define GPOUT_SYS_UART2_TX			86
+#define GPOUT_SYS_USB2_DBG_DRIVE_VBUS		87
+#define GPOUT_SYS_I2C3_CLK			88
+#define GPOUT_SYS_I2C3_DATA			89
+#define GPOUT_SYS_UART3_DTR			90
+#define GPOUT_SYS_UART3_RTS			91
+#define GPOUT_SYS_UART3_TX			92
+#define GPOUT_SYS_USB3_DBG_DRIVE_VBUS		93
+#define GPOUT_SYS_I2C4_CLK			94
+#define GPOUT_SYS_I2C4_DATA			95
+#define GPOUT_SYS_UART4_DTR			96
+#define GPOUT_SYS_UART4_RTS			97
+#define GPOUT_SYS_UART4_TX			98
+#define GPOUT_SYS_I2C5_CLK			99
+#define GPOUT_SYS_I2C5_DATA			100
+
+/* sys_iomux_west dout */
+#define GPOUT_SYS_RSVD0				2
+#define GPOUT_SYS_RSVD1				3
+#define GPOUT_SYS_RSVD2				4
+#define GPOUT_SYS_RSVD3				5
+#define GPOUT_SYS_RSVD4				6
+#define GPOUT_SYS_RSVD5				7
+#define GPOUT_SYS_RSVD6				8
+#define GPOUT_SYS_RSVD7				9
+#define GPOUT_SYS_RSVD8				10
+#define GPOUT_SYS_HD_AUDIO0_BCLK		11
+#define GPOUT_SYS_HD_AUDIO0_RST			12
+#define GPOUT_SYS_HD_AUDIO0_SDI0_O		13
+#define GPOUT_SYS_HD_AUDIO0_SDI1_O		14
+#define GPOUT_SYS_HD_AUDIO0_SDO0		15
+#define GPOUT_SYS_HD_AUDIO0_SDO1		16
+#define GPOUT_SYS_HD_AUDIO0_SYNC		17
+#define GPOUT_SYS_HIFI4_JTAG_TDO		18
+#define GPOUT_SYS_CLK_GCLK5			19
+#define GPOUT_SYS_SMBUS1_CLK			20
+#define GPOUT_SYS_SMBUS1_DATA			21
+#define GPOUT_SYS_SMBUS1_SUSPEND		22
+#define GPOUT_SYS_SPI2_MO			23
+#define GPOUT_SYS_SPI2_SS0			24
+#define GPOUT_SYS_SPI2_SS1			25
+#define GPOUT_SYS_SPI2_SS2			26
+#define GPOUT_SYS_SPI2_SS3			27
+#define GPOUT_SYS_SPI2_SCLK			28
+#define GPOUT_SYS_SPI2_SO			29
+#define GPOUT_SYS_UART5_DTR			30
+#define GPOUT_SYS_UART5_RTS			31
+#define GPOUT_SYS_UART5_TX			32
+#define GPOUT_SYS_I2C6_CLK			33
+#define GPOUT_SYS_I2C6_DATA			34
+#define GPOUT_SYS_UART6_DTR			35
+#define GPOUT_SYS_UART6_RTS			36
+#define GPOUT_SYS_UART6_TX			37
+#define GPOUT_SYS_I2C7_CLK			38
+#define GPOUT_SYS_I2C7_DATA			39
+
+/* aon_iomux dout */
+#define GPOUT_AON_CLK_32K			2
+#define GPOUT_AON_CLK_GCLK0			3
+#define GPOUT_AON_CLK_GCLK_OSC			4
+#define GPOUT_AON_SIG_STUB_POWER_EN_O		5
+#define GPOUT_AON_EMMC_PU_PD_DATA2		6
+#define GPOUT_AON_EMMC_BUS_POWER		7
+#define GPOUT_AON_EMMC_BUS_VOLTAGE_0		8
+#define GPOUT_AON_EMMC_BUS_VOLTAGE_1		9
+#define GPOUT_AON_EMMC_BUS_VOLTAGE_2		10
+#define GPOUT_AON_EMMC_LED			11
+#define GPOUT_AON_SDIO0_PU_PD_DATA2		12
+#define GPOUT_AON_SDIO0_BUS_POWER		13
+#define GPOUT_AON_SDIO0_RESET			14
+#define GPOUT_AON_SDIO0_BUS_VOLTAGE_0		15
+#define GPOUT_AON_SDIO0_BUS_VOLTAGE_1		16
+#define GPOUT_AON_SDIO0_BUS_VOLTAGE_2		17
+#define GPOUT_AON_SDIO0_LED			18
+#define GPOUT_AON_JTAG_TDO			19
+#define GPOUT_AON_SCP_POWER_EN			20
+#define GPOUT_AON_WATCHDOG1_RESET		21
+#define GPOUT_AON_UART7_TX			22
+#define GPOUT_AON_I2C8_CLK			23
+#define GPOUT_AON_I2C8_DATA			24
+
+/* sys_iomux_east doen */
+#define GPOEN_SYS_ENABLE			0
+#define GPOEN_SYS_DISABLE			1
+#define GPOEN_SYS_I2C0_CLK			2
+#define GPOEN_SYS_I2C0_DATA			3
+#define GPOEN_SYS_I2S0_STEREO_SDOE_0		4
+#define GPOEN_SYS_I2S0_STEREO_SDOE_1		5
+#define GPOEN_SYS_SPI0_N_MO_EN			6
+#define GPOEN_SYS_SPI0_N_SCLK_EN		7
+#define GPOEN_SYS_SPI0_N_SO_EN			8
+#define GPOEN_SYS_SPI0_N_SS_EN			9
+#define GPOEN_SYS_PWM_CHANNEL0			10
+#define GPOEN_SYS_PWM_CHANNEL1			11
+#define GPOEN_SYS_PWM_CHANNEL2			12
+#define GPOEN_SYS_PWM_CHANNEL3			13
+#define GPOEN_SYS_PWM_CHANNEL4			14
+#define GPOEN_SYS_PWM_CHANNEL5			15
+#define GPOEN_SYS_PWM_CHANNEL6			16
+#define GPOEN_SYS_PWM_CHANNEL7			17
+#define GPOEN_SYS_SMBUS0_CLK			18
+#define GPOEN_SYS_SMBUS0_DATA			19
+#define GPOEN_SYS_SMBUS0_ALERT			20
+#define GPOEN_SYS_I2C1_CLK			21
+#define GPOEN_SYS_I2C1_DATA			22
+#define GPOEN_SYS_I2S1_SDO0			23
+#define GPOEN_SYS_I2S1_SDO1			24
+#define GPOEN_SYS_I2S1_SDO2			25
+#define GPOEN_SYS_I2S1_SDO3			26
+#define GPOEN_SYS_I2S1_SDO4			27
+#define GPOEN_SYS_I2S1_SDO5			28
+#define GPOEN_SYS_I2S1_SDO6			29
+#define GPOEN_SYS_I2S1_SDO7			30
+#define GPOEN_SYS_SPI1_N_MO_EN			31
+#define GPOEN_SYS_SPI1_N_SCLK_EN		32
+#define GPOEN_SYS_SPI1_N_SO_EN			33
+#define GPOEN_SYS_SPI1_N_SS_EN			34
+#define GPOEN_SYS_I2C2_CLK			35
+#define GPOEN_SYS_I2C2_DATA			36
+#define GPOEN_SYS_I2C3_CLK			37
+#define GPOEN_SYS_I2C3_DATA			38
+#define GPOEN_SYS_I2C4_CLK			39
+#define GPOEN_SYS_I2C4_DATA			40
+#define GPOEN_SYS_I2C5_CLK			41
+#define GPOEN_SYS_I2C5_DATA			42
+
+/* sys_iomux_west doen */
+#define GPOEN_SYS_RSVD0				2
+#define GPOEN_SYS_RSVD1				3
+#define GPOEN_SYS_RSVD2				4
+#define GPOEN_SYS_RSVD3				5
+#define GPOEN_SYS_RSVD4				6
+#define GPOEN_SYS_RSVD5				7
+#define GPOEN_SYS_RSVD6				8
+#define GPOEN_SYS_HD_AUDIO0_SDI0		9
+#define GPOEN_SYS_HD_AUDIO0_SDI1		10
+#define GPOEN_SYS_HIFI4_JTAG_TDO		11
+#define GPOEN_SYS_SMBUS1_CLK			12
+#define GPOEN_SYS_SMBUS1_DATA			13
+#define GPOEN_SYS_SMBUS1_ALERT			14
+#define GPOEN_SYS_SPI2_MO			15
+#define GPOEN_SYS_SPI2_SCLK			16
+#define GPOEN_SYS_SPI2_SO			17
+#define GPOEN_SYS_SPI2_SS			18
+#define GPOEN_SYS_I2C6_CLK			19
+#define GPOEN_SYS_I2C6_DATA			20
+#define GPOEN_SYS_I2C7_CLK			21
+#define GPOEN_SYS_I2C7_DATA			22
+
+/* aon_iomux doen */
+#define GPOEN_AON_JTAG_TDO			2
+#define GPOEN_AON_I2C8_CLK			3
+#define GPOEN_AON_I2C8_DATA			4
+
+/* sys_iomux din */
+#define GPI_NONE				255
+
+/* sys_iomux_east din */
+#define GPI_SYS_CAN0_RXD			0
+#define GPI_SYS_I2C0_CLK			1
+#define GPI_SYS_I2C0_DATA			2
+#define GPI_SYS_SPI0_SCLK			3
+#define GPI_SYS_SPI0_MI				4
+#define GPI_SYS_SPI0_SS_N			5
+#define GPI_SYS_SPI0_SI				6
+#define GPI_SYS_UART0_CTS			7
+#define GPI_SYS_UART0_DCD			8
+#define GPI_SYS_UART0_DSR			9
+#define GPI_SYS_UART0_RI			10
+#define GPI_SYS_UART0_RX			11
+#define GPI_SYS_USB0_DBG_OVERCURRENT		12
+#define GPI_SYS_PDM_DMIC0			13
+#define GPI_SYS_PDM_DMIC1			14
+#define GPI_SYS_I2SRX0_SDIN0			15
+#define GPI_SYS_I2SRX0_SDIN1			16
+#define GPI_SYS_SMBUS0_CLK			17
+#define GPI_SYS_SMBUS0_DATA			18
+#define GPI_SYS_SMBUS0_ALERT			19
+#define GPI_SYS_JTAG_TCK			20
+#define GPI_SYS_MCLK_EXT			21
+#define GPI_SYS_I2SRX0_BCLK			22
+#define GPI_SYS_I2SRX0_LRCK			23
+#define GPI_SYS_I2STX0_BCLK			24
+#define GPI_SYS_I2STX0_LRCK			25
+#define GPI_SYS_SPI0_SCLK_IN0			26
+#define GPI_SYS_SPI0_SCLK_IN1			27
+#define GPI_SYS_I2S0_STEREO_RX_BCLK		28
+#define GPI_SYS_I2S0_STEREO_RX_LRCK		29
+#define GPI_SYS_I2S0_STEREO_TX_BCLK		30
+#define GPI_SYS_I2S0_STEREO_TX_LRCK		31
+#define GPI_SYS_I2S1_RX_BCLK			32
+#define GPI_SYS_I2S1_RX_LRCK			33
+#define GPI_SYS_I2S1_TX_BCLK			34
+#define GPI_SYS_I2S1_TX_LRCK			35
+#define GPI_SYS_USB0_TYPEC_OVERCURRENT		36
+#define GPI_SYS_CAN1_RXD			37
+#define GPI_SYS_I2C1_CLK			38
+#define GPI_SYS_I2C1_DATA			39
+#define GPI_SYS_I2S1_SDI_0			40
+#define GPI_SYS_I2S1_SDI_1			41
+#define GPI_SYS_I2S1_SDI_2			42
+#define GPI_SYS_I2S1_SDI_3			43
+#define GPI_SYS_I2S1_SDI_4			44
+#define GPI_SYS_I2S1_SDI_5			45
+#define GPI_SYS_I2S1_SDI_6			46
+#define GPI_SYS_I2S1_SDI_7			47
+#define GPI_SYS_SDIO1_CARD_DETECT		48
+#define GPI_SYS_SDIO1_WRITE_PROTECT		49
+#define GPI_SYS_SPI1_EXT_CLK			50
+#define GPI_SYS_SPI1_MI				51
+#define GPI_SYS_SPI1_SS_IN			52
+#define GPI_SYS_SPI1_SI				53
+#define GPI_SYS_UART1_CTS			54
+#define GPI_SYS_UART1_DCD			55
+#define GPI_SYS_UART1_DSR			56
+#define GPI_SYS_UART1_RI			57
+#define GPI_SYS_UART1_RX			58
+#define GPI_SYS_USB1_DBG_OVERCURRENT		59
+#define GPI_SYS_I2C2_CLK			60
+#define GPI_SYS_I2C2_DATA			61
+#define GPI_SYS_UART2_CTS			62
+#define GPI_SYS_UART2_DCD			63
+#define GPI_SYS_UART2_DSR			64
+#define GPI_SYS_UART2_RI			65
+#define GPI_SYS_UART2_RX			66
+#define GPI_SYS_USB2_DBG_OVERCURRENT		67
+#define GPI_SYS_I2C3_CLK			68
+#define GPI_SYS_I2C3_DATA			69
+#define GPI_SYS_UART3_CTS			70
+#define GPI_SYS_UART3_DCD			71
+#define GPI_SYS_UART3_DSR			72
+#define GPI_SYS_UART3_RI			73
+#define GPI_SYS_UART3_RX			74
+#define GPI_SYS_USB3_DBG_OVERCURRENT		75
+#define GPI_SYS_I2C4_CLK			76
+#define GPI_SYS_I2C4_DATA			77
+#define GPI_SYS_UART4_CTS			78
+#define GPI_SYS_UART4_DCD			79
+#define GPI_SYS_UART4_DSR			80
+#define GPI_SYS_UART4_RI			81
+#define GPI_SYS_UART4_RX			82
+#define GPI_SYS_I2C5_CLK			83
+#define GPI_SYS_I2C5_DATA			84
+
+/* sys_iomux_west din */
+#define GPI_SYS_RSVD0				0
+#define GPI_SYS_RSVD1				1
+#define GPI_SYS_RSVD2				2
+#define GPI_SYS_RSVD3				3
+#define GPI_SYS_RSVD4				4
+#define GPI_SYS_RSVD5				5
+#define GPI_SYS_RSVD6				6
+#define GPI_SYS_HD_AUDIO0_SDI0_I		7
+#define GPI_SYS_HD_AUDIO0_SDI1_I		8
+#define GPI_SYS_HIFI4_JTAG_TDI			9
+#define GPI_SYS_HIFI4_JTAG_TMS			10
+#define GPI_SYS_HIFI4_JTAG_RST			11
+#define GPI_SYS_RSVD7				12
+#define GPI_SYS_HIFI4_JTAG_TCK			13
+#define GPI_SYS_RSVD8				14
+#define GPI_SYS_SPI0_SCLK_IN2			15
+#define GPI_SYS_SMBUS1_CLK			16
+#define GPI_SYS_SMBUS1_DATA			17
+#define GPI_SYS_SMBUS1_ALERT			18
+#define GPI_SYS_SPI2_EXT_CLK			19
+#define GPI_SYS_SPI2_MI				20
+#define GPI_SYS_SPI2_SS_IN			21
+#define GPI_SYS_SPI2_SI				22
+#define GPI_SYS_UART5_CTS			23
+#define GPI_SYS_UART5_DCD			24
+#define GPI_SYS_UART5_DSR			25
+#define GPI_SYS_UART5_RI			26
+#define GPI_SYS_UART5_RX			27
+#define GPI_SYS_I2C6_CLK			28
+#define GPI_SYS_I2C6_DATA			29
+#define GPI_SYS_UART6_CTS			30
+#define GPI_SYS_UART6_DCD			31
+#define GPI_SYS_UART6_DSR			32
+#define GPI_SYS_UART6_RI			33
+#define GPI_SYS_UART6_RX			34
+#define GPI_SYS_I2C7_CLK			35
+#define GPI_SYS_I2C7_DATA			36
+
+/* aon_iomux din */
+#define GPI_AON_JTAG_TCK			0
+#define GPI_AON_SIG_STUB_RESERVED_0		1
+#define GPI_AON_SIG_STUB_RESERVED_1		2
+#define GPI_AON_SIG_STUB_RESERVED_2		3
+#define GPI_AON_XSPI0_GP_OPEN_DRAIN_0		4
+#define GPI_AON_XSPI0_GP_OPEN_DRAIN_1		5
+#define GPI_AON_XSPI0_GP_OPEN_DRAIN_2		6
+#define GPI_AON_XSPI0_GP_OPEN_DRAIN_3		7
+#define GPI_AON_SDIO0_CARD_DETECTION		8
+#define GPI_AON_SDIO0_WRITE_PROTECTION		9
+#define GPI_AON_SRC_BUF_JTAG_RST		10
+#define GPI_AON_JTAG_TDI			11
+#define GPI_AON_JTAG_TMS			12
+#define GPI_AON_UART7_RX			13
+#define GPI_AON_I2C8_CLK			14
+#define GPI_AON_I2C8_DATA			15
+
+#endif
diff --git a/arch/riscv/boot/dts/starfive/jh8100.dtsi b/arch/riscv/boot/dts/starfive/jh8100.dtsi
index 5ba826e38ead..b7c440298ad9 100644
--- a/arch/riscv/boot/dts/starfive/jh8100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh8100.dtsi
@@ -5,6 +5,8 @@
 
 /dts-v1/;
 #include <dt-bindings/clock/starfive,jh8100-crg.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/starfive,jh8100-pinctrl.h>
 #include <dt-bindings/reset/starfive,jh8100-crg.h>
 
 / {
@@ -563,6 +565,19 @@ uart4: serial@121a0000  {
 			status = "disabled";
 		};
 
+		pinctrl_east: pinctrl@122d0000 {
+			compatible = "starfive,jh8100-sys-pinctrl-east",
+				     "syscon", "simple-mfd";
+			reg = <0x0 0x122d0000 0x0 0x10000>;
+			clocks = <&necrg JH8100_NECLK_IOMUX_EAST_PCLK>;
+			resets = <&necrg JH8100_NERST_SYS_IOMUX_E>;
+			interrupts = <182>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_east 0 0 48>;
+		};
+
 		necrg: clock-controller@12320000 {
 			compatible = "starfive,jh8100-necrg";
 			reg = <0x0 0x12320000 0x0 0x10000>;
@@ -634,6 +649,19 @@ nwcrg: clock-controller@123c0000 {
 			#reset-cells = <1>;
 		};
 
+		pinctrl_west: pinctrl@123e0000 {
+			compatible = "starfive,jh8100-sys-pinctrl-west",
+				     "syscon", "simple-mfd";
+			reg = <0x0 0x123e0000 0x0 0x10000>;
+			clocks = <&nwcrg JH8100_NWCLK_IOMUX_WEST_PCLK>;
+			resets = <&nwcrg JH8100_NWRST_SYS_IOMUX_W>;
+			interrupts = <183>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_west 0 0 16>;
+		};
+
 		syscrg: clock-controller@126d0000 {
 			compatible = "starfive,jh8100-syscrg";
 			reg = <0x0 0x126d0000 0x0 0x10000>;
@@ -656,6 +684,13 @@ swcrg: clock-controller@12720000 {
 			#reset-cells = <1>;
 		};
 
+		pinctrl_gmac: pinctrl@12770000 {
+			compatible = "starfive,jh8100-sys-pinctrl-gmac",
+				     "syscon", "simple-mfd";
+			status = "disabled";
+			reg = <0x0 0x12770000 0x0 0x10000>;
+		};
+
 		uart5: serial@127d0000  {
 			compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
 			reg = <0x0 0x127d0000 0x0 0x10000>;
@@ -674,6 +709,18 @@ uart6: serial@127e0000  {
 			status = "disabled";
 		};
 
+		pinctrl_aon: pinctrl@1f300000 {
+			compatible = "starfive,jh8100-aon-pinctrl",
+				     "syscon", "simple-mfd";
+			reg = <0x0 0x1f300000 0x0 0x10000>;
+			resets = <&aoncrg JH8100_AONRST_AON_IOMUX_PRESETN>;
+			interrupts = <160>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aon 0 0 16>;
+		};
+
 		aoncrg: clock-controller@1f310000 {
 			compatible = "starfive,jh8100-aoncrg";
 			reg = <0x0 0x1f310000 0x0 0x10000>;
-- 
2.43.0