Received-SPF: pass (google.com: domain of linux-kernel+bounces-72585-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Date: Tue, 20 Feb 2024 08:40:33 +0000
From: Simon Horman <horms@kernel.org>
To: Breno Leitao <leitao@debian.org>
Cc: kuba@kernel.org, davem@davemloft.net, pabeni@redhat.com,
	edumazet@google.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, stephen@networkplumber.org,
	f.fainelli@gmail.com, Johannes Berg <johannes.berg@intel.com>,
	Martin KaFai Lau <martin.lau@kernel.org>
Subject: Re: [PATCH net-next v3] net: sysfs: Do not create sysfs for non BQL
 device
Message-ID: <20240220084033.GR40273@kernel.org>
References: <20240219104238.3782658-1-leitao@debian.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240219104238.3782658-1-leitao@debian.org>

On Mon, Feb 19, 2024 at 02:42:36AM -0800, Breno Leitao wrote:
> Creation of sysfs entries is expensive, mainly for workloads that
> constantly creates netdev and netns often.
> 
> Do not create BQL sysfs entries for devices that don't need,
> basically those that do not have a real queue, i.e, devices that has
> NETIF_F_LLTX and IFF_NO_QUEUE, such as `lo` interface.
> 
> This will remove the /sys/class/net/eth0/queues/tx-X/byte_queue_limits/
> directory for these devices.
> 
> In the example below, eth0 has the `byte_queue_limits` directory but not
> `lo`.
> 
> 	# ls /sys/class/net/lo/queues/tx-0/
> 	traffic_class  tx_maxrate  tx_timeout  xps_cpus  xps_rxqs
> 
> 	# ls /sys/class/net/eth0/queues/tx-0/byte_queue_limits/
> 	hold_time  inflight  limit  limit_max  limit_min
> 
> This also removes the #ifdefs, since we can also use netdev_uses_bql() to
> check if the config is enabled. (as suggested by Jakub).
> 
> Suggested-by: Eric Dumazet <edumazet@google.com>
> Signed-off-by: Breno Leitao <leitao@debian.org>

Thanks Breno,

I like that this removes sysfs entries for devices for which they do not
act on.  Although I understand it is not a complete solution - still not
all devices that have these entries use BQL - I think a key value there is
to alleviate potential confusion for users.  And as such, this is a step in
the right direction.

I also like that some #ifdefs disappear.

Reviewed-by: Simon Horman <horms@kernel.org>

..