Received-SPF: pass (google.com: domain of linux-kernel+bounces-73718-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Date: Tue, 20 Feb 2024 22:14:57 +0100
Subject: [PATCH 3/4] dt-bindings: iio: humidity: hdc3020: add reset-gpios
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240220-hdc3020-pm-v1-3-d8e60dbe79e9@gmail.com>
References: <20240220-hdc3020-pm-v1-0-d8e60dbe79e9@gmail.com>
In-Reply-To: <20240220-hdc3020-pm-v1-0-d8e60dbe79e9@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>, 
 Lars-Peter Clausen <lars@metafoo.de>, Li peiyu <579lpy@gmail.com>, 
 Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>, 
 linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, 
 devicetree@vger.kernel.org, 
 Javier Carrasco <javier.carrasco.cruz@gmail.com>

The HDC3020 provides an active low reset signal that is still not
described in the bindings.

Add reset-gpios to the bindings and the example.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
index 8b5dedd1a598..b375d307513f 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -34,6 +34,9 @@ properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -43,6 +46,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -54,5 +58,6 @@ examples:
             vdd-supply = <&vcc_3v3>;
             interrupt-parent = <&gpio3>;
             interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
         };
     };

-- 
2.40.1