Received-SPF: pass (google.com: domain of linux-kernel+bounces-74034-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Wed, 21 Feb 2024 09:12:05 +0530
Subject: [PATCH 19/21] ARM: dts: qcom: apq8064: Add PCIe bridge node
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240221-pcie-qcom-bridge-dts-v1-19-6c6df0f9450d@linaro.org>
References: <20240221-pcie-qcom-bridge-dts-v1-0-6c6df0f9450d@linaro.org>
In-Reply-To: <20240221-pcie-qcom-bridge-dts-v1-0-6c6df0f9450d@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, cros-qcom-dts-watchers@chromium.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
 linux-kernel@vger.kernel.org, 
 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 3faf57035d54..1ebd6cef4057 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -1318,6 +1318,16 @@ pcie: pcie@1b500000 {
 				 <&gcc PCIE_PHY_RESET>;
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		hdmi: hdmi-tx@4a00000 {

-- 
2.25.1