Received-SPF: pass (google.com: domain of linux-kernel+bounces-74032-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Wed, 21 Feb 2024 09:12:03 +0530
Subject: [PATCH 17/21] ARM: dts: qcom: ipq8064: Add PCIe bridge node
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240221-pcie-qcom-bridge-dts-v1-17-6c6df0f9450d@linaro.org>
References: <20240221-pcie-qcom-bridge-dts-v1-0-6c6df0f9450d@linaro.org>
In-Reply-To: <20240221-pcie-qcom-bridge-dts-v1-0-6c6df0f9450d@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, cros-qcom-dts-watchers@chromium.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
 linux-kernel@vger.kernel.org, 
 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6a7f4dd0f775..98448ea6ffca 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -1125,6 +1125,16 @@ pcie0: pcie@1b500000 {
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1: pcie@1b700000 {
@@ -1176,6 +1186,16 @@ pcie1: pcie@1b700000 {
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2: pcie@1b900000 {
@@ -1227,6 +1247,16 @@ pcie2: pcie@1b900000 {
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qsgmii_csr: syscon@1bb00000 {

-- 
2.25.1