Received-SPF: pass (google.com: domain of linux-kernel+bounces-78920-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH 1/6] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
Date: Fri, 23 Feb 2024 18:51:07 +0100
Message-ID: <20240223175116.2005407-2-jbrunet@baylibre.com>
In-Reply-To: <20240223175116.2005407-1-jbrunet@baylibre.com>
References: <20240223175116.2005407-1-jbrunet@baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.

However there is no justification for this:

* If the codec needs MCLK for its operation, mclk-fs is expected to be set
  according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
  minimum the divider between SCLK and MCLK can do.

Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 sound/soc/meson/axg-tdm-interface.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 1c3d433cefd2..cd5168e826df 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -264,8 +264,8 @@ static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai,
 	srate = iface->slots * iface->slot_width * params_rate(params);
 
 	if (!iface->mclk_rate) {
-		/* If no specific mclk is requested, default to bit clock * 4 */
-		clk_set_rate(iface->mclk, 4 * srate);
+		/* If no specific mclk is requested, default to bit clock * 2 */
+		clk_set_rate(iface->mclk, 2 * srate);
 	} else {
 		/* Check if we can actually get the bit clock from mclk */
 		if (iface->mclk_rate % srate) {
-- 
2.43.0