Received-SPF: pass (google.com: domain of linux-kernel+bounces-79058-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Jernej =?utf-8?B?xaBrcmFiZWM=?= <jernej.skrabec@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
 Yangtao Li <tiny.windzz@gmail.com>, "Rafael J. Wysocki" <rafael@kernel.org>,
 Daniel Lezcano <daniel.lezcano@linaro.org>, Amit Kucheria <amitk@kernel.org>,
 Zhang Rui <rui.zhang@intel.com>, Chen-Yu Tsai <wens@csie.org>,
 Samuel Holland <samuel@sholland.org>, Mark Brown <broonie@kernel.org>
Cc: Hugh Dickins <hughd@google.com>, linux-pm@vger.kernel.org,
 linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev,
 linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject:
 Re: [PATCH v3] thermal/drivers/sun8i: Don't fail probe due to zone
 registration failure
Date: Fri, 23 Feb 2024 20:51:12 +0100
Message-ID: <12383045.O9o76ZdvQC@jernej-laptop>
In-Reply-To:
 <20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org>
References: <20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"

Hi Daniel, Rafael,

is there any issue with this patch? Can you apply it?

Best regards,
Jernej

Dne sreda, 24. januar 2024 ob 00:33:07 CET je Mark Brown napisal(a):
> Currently the sun8i thermal driver will fail to probe if any of the
> thermal zones it is registering fails to register with the thermal core.
> Since we currently do not define any trip points for the GPU thermal
> zones on at least A64 or H5 this means that we have no thermal support
> on these platforms:
> 
> [    1.698703] thermal_sys: Failed to find 'trips' node
> [    1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1
> 
> even though the main CPU thermal zone on both SoCs is fully configured.
> This does not seem ideal, while we may not be able to use all the zones
> it seems better to have those zones which are usable be operational.
> Instead just carry on registering zones if we get any non-deferral
> error, allowing use of those zones which are usable.
> 
> This means that we also need to update the interrupt handler to not
> attempt to notify the core for events on zones which we have not
> registered, I didn't see an ability to mask individual interrupts and
> I would expect that interrupts would still be indicated in the ISR even
> if they were masked.
> 
> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
> Changes in v3:
> - Rebase onto v6.8-rc1.
> - Link to v2: https://lore.kernel.org/r/20230912-thermal-sun8i-registration-v2-1-077230107768@kernel.org
> 
> Changes in v2:
> - Rebase onto v6.6-rc1.
> - Link to v1: https://lore.kernel.org/r/20230718-thermal-sun8i-registration-v1-1-c95b1b070340@kernel.org
> ---
>  drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> index 6a8e386dbc8d..c2a8ae7f8f2f 100644
> --- a/drivers/thermal/sun8i_thermal.c
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -188,6 +188,9 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
>  	int i;
>  
>  	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
> +		/* We allow some zones to not register. */
> +		if (IS_ERR(tmdev->sensor[i].tzd))
> +			continue;
>  		thermal_zone_device_update(tmdev->sensor[i].tzd,
>  					   THERMAL_EVENT_UNSPECIFIED);
>  	}
> @@ -465,8 +468,17 @@ static int sun8i_ths_register(struct ths_device *tmdev)
>  						      i,
>  						      &tmdev->sensor[i],
>  						      &ths_ops);
> -		if (IS_ERR(tmdev->sensor[i].tzd))
> -			return PTR_ERR(tmdev->sensor[i].tzd);
> +
> +		/*
> +		 * If an individual zone fails to register for reasons
> +		 * other than probe deferral (eg, a bad DT) then carry
> +		 * on, other zones might register successfully.
> +		 */
> +		if (IS_ERR(tmdev->sensor[i].tzd)) {
> +			if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER)
> +				return PTR_ERR(tmdev->sensor[i].tzd);
> +			continue;
> +		}
>  
>  		devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
>  	}
> 
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20230718-thermal-sun8i-registration-df3a136ccafa
> 
> Best regards,
>