Received-SPF: pass (google.com: domain of linux-kernel+bounces-79793-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Sat, 24 Feb 2024 18:29:50 +0000
From: Jonathan Cameron <jic23@kernel.org>
To: Conor Dooley <conor@kernel.org>
Cc: Dumitru Ceclan <mitrutzceclan@gmail.com>, linus.walleij@linaro.org,
 brgl@bgdev.pl, andy@kernel.org, linux-gpio@vger.kernel.org, Lars-Peter
 Clausen <lars@metafoo.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof
 Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley
 <conor+dt@kernel.org>, Michael Walle <michael@walle.cc>, Andy Shevchenko
 <andy.shevchenko@gmail.com>, Arnd Bergmann <arnd@arndb.de>, ChiaEn Wu
 <chiaen_wu@richtek.com>, Niklas Schnelle <schnelle@linux.ibm.com>, Leonard
 =?UTF-8?B?R8O2aHJz?= <l.goehrs@pengutronix.de>, Mike Looijmans
 <mike.looijmans@topic.nl>, Haibo Chen <haibo.chen@nxp.com>, Hugo Villeneuve
 <hvilleneuve@dimonoff.com>, David Lechner <dlechner@baylibre.com>, Ceclan
 Dumitru <dumitru.ceclan@analog.com>, linux-iio@vger.kernel.org,
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v13 1/3] dt-bindings: adc: add AD7173
Message-ID: <20240224182950.1d00dab7@jic23-huawei>
In-Reply-To: <20240220-outmost-flavoring-b2593160de91@spud>
References: <20240220094344.17556-1-mitrutzceclan@gmail.com>
	<20240220-outmost-flavoring-b2593160de91@spud>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Tue, 20 Feb 2024 18:52:37 +0000
Conor Dooley <conor@kernel.org> wrote:

> On Tue, Feb 20, 2024 at 11:43:38AM +0200, Dumitru Ceclan wrote:
> 
> > +  interrupts:
> > +    minItems: 1
> > +    description: |  
> 
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    items:
> > +      - const: rdy
> > +      - const: err  
> 
> I noticed that for minItems == 1, the rdy interrupt is required and err
> is the optional one.
> 
> With that in mind, you can simplify the interrupts description so that
> it describes the interrupts separately:
> 
>   interrupts:
>     minItems:
>     items:
>       - description:
>           Ready: multiplexed with SPI data out. While SPI CS is low,
>           can be used to indicate the completion of a conversion.
> 
>       - description:
>           Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
>           and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. Therefore,
>           the ERROR pin indicates that an error has occurred.
> 
> Otherwise, I think everything has been sorted out?
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

This ordering may bite us in the future. Someone will build a board
with err as only one wired. But meh, it will be a binding relaxation needed
so I'm not that bothered by that.
> 
> Cheers,
> Conor.