Received-SPF: pass (google.com: domain of linux-kernel+bounces-80221-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <c5556062-1761-48ae-a028-6180637f9cc7@gmail.com>
Date: Sun, 25 Feb 2024 18:09:36 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH 2/2] arm64: dts: qcom: add TP-Link Archer AX55 v1
Content-Language: hu
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
 Bjorn Andersson <andersson@kernel.org>,
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com>
 <20240223-archer-ax55-v1-v1-2-99f8fa2c3858@gmail.com>
 <fb14acfa-5b43-4ce7-93f4-9f6681152ca7@linaro.org>
From: Gabor Juhos <j4g8y7@gmail.com>
In-Reply-To: <fb14acfa-5b43-4ce7-93f4-9f6681152ca7@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit

Hi Krzysztof,

> On 23/02/2024 09:17, Gabor Juhos wrote:

<snip>

>> ---
>> Note: running 'make CHECK_DTBS=y qcom/ipq5018-tplink-archer-ax55-v1.dtb'
>> shows the following:
>>
>>     DTC_CHK arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb
>>   <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short
>>   	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>   <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short
>>   	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>   <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupts: [[0, 62, 4]] is too short
>>   	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>   <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names:0: 'pwr_event' was expected
>>   	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>   <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@8af8800: interrupt-names: ['hs_phy_irq'] is too short
>>   	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>
>> This is not caused by the new device tree per se but comes from
>> the usb@8af8800 node defined in ipq5018.dtsi. Running the check
>> on 'qcom/ipq5018-rdp432-c2.dtb' shows the same.
> 
> Thanks for noticing and describing. Appreciated!

FWIW, I have checked that in the meantime. The warning happens since commit
53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding").
Reverting that eliminates the warning.

> 
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>>  .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts     | 133 +++++++++++++++++++++
>>  2 files changed, 134 insertions(+)
> 
> ...

<snip>

>> +
>> +&tlmm {
>> +	button_pins: button-pins-state {
>> +		pins = "gpio25", "gpio31";
>> +		bias-pull-up;
>> +		drive-strength = <8>;
>> +		function = "gpio";
> 
> Usually we keep 'function' as second property, after 'pins', but there
> is no need to send new version just for that.

Sorry, it is my fault. I should have noticed that pattern based on the other dts
files. Nevertheless, I can send a v2 or a follow-up patch to fix the ordering so
we can avoid having a bad example in the tree.

> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Thank you for the review!

Regards,
Gabor