Received-SPF: pass (google.com: domain of linux-kernel+bounces-80292-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Precedence: bulk
MIME-Version: 1.0
References: <20240225-gcc-ipq5018-register-fixes-v1-0-3c191404d9f0@gmail.com> <20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com>
In-Reply-To: <20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sun, 25 Feb 2024 23:00:18 +0200
Message-ID: <CAA8EJprEhxN7_bHnq7rJRbBUQUKyjSGBpCiLT_bDLmwF5SjO7A@mail.gmail.com>
Subject: Re: [PATCH 2/3] clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
To: Gabor Juhos <j4g8y7@gmail.com>
Cc: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, 
	Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, 
	Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>, Varadarajan Narayanan <quic_varada@quicinc.com>, 
	Sricharan Ramabadhran <quic_srichara@quicinc.com>, linux-arm-msm@vger.kernel.org, 
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"

On Sun, 25 Feb 2024 at 19:33, Gabor Juhos <j4g8y7@gmail.com> wrote:
>
> The following table shows the values of the 'halt_reg' and the
> 'enable_reg' fields from the pcie clocks defined in the current
> driver:
>
>   clock                        halt_reg    enable_reg
>
>   gcc_pcie0_ahb_clk            0x75010     0x75010
>   gcc_pcie0_aux_clk            0x75014     0x75014
>   gcc_pcie0_axi_m_clk          0x75008     0x75008
>   gcc_pcie0_axi_s_bridge_clk   0x75048     0x75048
>   gcc_pcie0_axi_s_clk          0x7500c     0x7500c
>   gcc_pcie0_pipe_clk           0x75018     0x75018
>
>   gcc_pcie1_ahb_clk            0x76010     0x76010
>   gcc_pcie1_aux_clk            0x76014     0x76014
>   gcc_pcie1_axi_m_clk          0x76008     0x76008
>   gcc_pcie1_axi_s_bridge_clk   0x76048     0x76048
>   gcc_pcie1_axi_s_clk          0x7600c     0x7600c
>   gcc_pcie1_pipe_clk                 8*    0x76018
>
> Based on the table, it is quite likely that the pcie0 and the pci1
> clocks are using the same register layout, however it seems that
> the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
> is wrong.
>
> In the downstream driver [1], the same '0x76018' value is used for
> both the 'halt_reg' and for the 'enable_reg' fields of the
> 'gcc_pcie1_pipe_clk' clock.
>
> Update the current driver to use the same value used downstream as
> probably that is the correct value.
>
> 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316
>
> Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
> ---
>  drivers/clk/qcom/gcc-ipq5018.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


-- 
With best wishes
Dmitry