Received-SPF: pass (google.com: domain of linux-kernel+bounces-82976-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Bastien Curutchet <bastien.curutchet@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Pavel Machek <pavel@ucw.cz>,
	Lee Jones <lee@kernel.org>,
	Richard Cochran <richardcochran@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Bastien Curutchet <bastien.curutchet@bootlin.com>
Cc: linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-leds@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	herve.codina@bootlin.com,
	maxime.chevallier@bootlin.com,
	christophercordahi@nanometrics.ca
Subject: [PATCH v2 1/6] dt-bindings: net: Add bindings for PHY DP83640
Date: Tue, 27 Feb 2024 10:39:40 +0100
Message-ID: <20240227093945.21525-2-bastien.curutchet@bootlin.com>
In-Reply-To: <20240227093945.21525-1-bastien.curutchet@bootlin.com>
References: <20240227093945.21525-1-bastien.curutchet@bootlin.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

The DP83640 is a PTP PHY. Some of his features can be enabled by
hardware straps. There is not binding yet.

Add a device tree binding to be able to override the hardware strap
configuration when needed.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
---
 .../devicetree/bindings/net/ti,dp83640.yaml   | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83640.yaml

diff --git a/Documentation/devicetree/bindings/net/ti,dp83640.yaml b/Documentation/devicetree/bindings/net/ti,dp83640.yaml
new file mode 100644
index 000000000000..db1dc909d5cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83640.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Nanometrics Inc
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,dp83640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DP83640 ethernet PHY
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Bastien Curutchet <bastien.curutchet@bootlin.com>
+
+description: |
+  The DP83640 Precision PHYTER device is an Ethernet PHY providing PTP
+  capabilities based on IEEE 1588 standard.
+
+  This device interfaces directly to the MAC layer through the
+  IEEE 802.3 Standard Media Independent Interface (MII), or Reduced MII (RMII).
+
+  Specifications about the Ethernet PHY can be found at:
+    https://www.ti.com/lit/gpn/dp83640
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,fiber-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ disable, enable ]
+    description: |
+      If present, enables or disables the FX Fiber Mode.
+       - disable  = FX Fiber Mode disabled
+       - enable   = FX Fiber Mode enabled
+      Fiber mode enabling can also be strapped. If the strap pin is not set
+      correctly or not set at all then this can be used to configure it.
+
+  leds:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    description: |
+      Describes the three LEDs of the PHY.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        ti,fiber-mode = "disable";
+        leds {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          led@0 {
+            reg = <0>;
+            label = "activity";
+          };
+          led@1 {
+            reg = <1>;
+            label = "link";
+          };
+          led@2 {
+            reg = <2>;
+            label = "speed";
+          };
+        };
+      };
+    };
-- 
2.43.0