Received-SPF: pass (google.com: domain of linux-kernel+bounces-83396-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: switch WSA8845 speakers to shared reset-gpio
Date: Tue, 27 Feb 2024 15:27:24 +0100
Message-Id: <20240227142725.625561-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20240227142725.625561-1-krzysztof.kozlowski@linaro.org>
References: <20240227142725.625561-1-krzysztof.kozlowski@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Each pair of WSA8845 speakers share the powerdown SD_N GPIO, thus this
GPIO is specified twice in each WSA8845 device node.  Such DTS was added
hoping non-exclusive GPIO usage would be accepted, but it turned out
otherwise: it is not supported by the Linux kernel.

Linux kernel however supports sharing reset GPIOs, when used bia the
reset controller framework as implemented in commit 26c8a435fce6 ("ASoC:
dt-bindings: qcom,wsa8840: Add reset-gpios for shared line") and
commit c721f189e89c ("reset: Instantiate reset GPIO controller for
shared reset-gpios").

Convert the property with shutdown GPIO to "reset-gpios" to use
mentioned Linux kernel feature.  This allows to bring all four speakers
out of reset.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Dependencies merged by respective maintainers for next release:
1. ASoC: commit 26c8a435fce6 ("ASoC: dt-bindings: qcom,wsa8840: Add
   reset-gpios for shared line")
2. reset: commit c721f189e89c ("reset: Instantiate reset GPIO controller
   for shared reset-gpios").
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index d7ba45953277..266a461f4882 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -802,13 +802,14 @@ &smb2360_2_eusb2_repeater {
 &swr0 {
 	status = "okay";
 
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
 	/* WSA8845, Left Woofer */
 	left_woofer: speaker@0,0 {
 		compatible = "sdw20217020400";
 		reg = <0 0>;
-		pinctrl-0 = <&spkr_01_sd_n_active>;
-		pinctrl-names = "default";
-		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -819,8 +820,7 @@ left_woofer: speaker@0,0 {
 	left_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		/* pinctrl in left_woofer node because of sharing the GPIO*/
-		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TwitterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -853,13 +853,14 @@ wcd_tx: codec@0,3 {
 &swr3 {
 	status = "okay";
 
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
 	/* WSA8845, Right Woofer */
 	right_woofer: speaker@0,0 {
 		compatible = "sdw20217020400";
 		reg = <0 0>;
-		pinctrl-0 = <&spkr_23_sd_n_active>;
-		pinctrl-names = "default";
-		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "WooferRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -870,8 +871,7 @@ right_woofer: speaker@0,0 {
 	right_tweeter: speaker@0,1 {
 		compatible = "sdw20217020400";
 		reg = <0 1>;
-		/* pinctrl in right_woofer node because of sharing the GPIO*/
-		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TwitterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
-- 
2.34.1