Received-SPF: pass (google.com: domain of linux-kernel+bounces-83589-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Robert Marko <robimarko@gmail.com>
To: andrew@lunn.ch,
	hkallweit1@gmail.com,
	linux@armlinux.org.uk,
	andersson@kernel.org,
	konrad.dybcio@linaro.org,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com,
	netdev@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	ansuelsmth@gmail.com
Cc: Robert Marko <robimarko@gmail.com>
Subject: [PATCH net-next 2/2] net: phy: qcom: qca808x: fill in possible_interfaces
Date: Tue, 27 Feb 2024 17:19:29 +0100
Message-ID: <20240227162030.2728618-3-robimarko@gmail.com>
In-Reply-To: <20240227162030.2728618-1-robimarko@gmail.com>
References: <20240227162030.2728618-1-robimarko@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Currently QCA808x driver does not fill the possible_interfaces.
2.5G QCA808x support SGMII and 2500Base-X while 1G model only supports
SGMII, so fill the possible_interfaces accordingly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 drivers/net/phy/qcom/qca808x.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 16c94e77646f..bd36f5b90391 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -170,6 +170,16 @@ static bool qca808x_is_1g_only(struct phy_device *phydev)
 		return false;
 }
 
+static void qca808x_fill_possible_interfaces(struct phy_device *phydev)
+{
+	unsigned long *possible = phydev->possible_interfaces;
+
+	__set_bit(PHY_INTERFACE_MODE_SGMII, possible);
+
+	if (!qca808x_is_1g_only(phydev))
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, possible);
+}
+
 static int qca808x_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
@@ -234,6 +244,8 @@ static int qca808x_config_init(struct phy_device *phydev)
 		}
 	}
 
+	qca808x_fill_possible_interfaces(phydev);
+
 	/* Configure adc threshold as 100mv for the link 10M */
 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
 				     QCA808X_ADC_THRESHOLD_MASK,
-- 
2.43.2