Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757480AbYABTvn (ORCPT ); Wed, 2 Jan 2008 14:51:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751927AbYABTvf (ORCPT ); Wed, 2 Jan 2008 14:51:35 -0500 Received: from mail0.scram.de ([78.47.204.202]:40564 "EHLO mail0.scram.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751739AbYABTvd (ORCPT ); Wed, 2 Jan 2008 14:51:33 -0500 X-Spam-Score: -4.015 X-Spam-Report: * -1.8 ALL_TRUSTED Passed through trusted hosts only via SMTP * -2.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1% * [score: 0.0000] * 0.4 AWL AWL: From: address is in the auto white-list Message-ID: <477BEB60.4070703@scram.de> Date: Wed, 02 Jan 2008 20:52:00 +0100 From: Jochen Friedrich User-Agent: Mozilla-Thunderbird 2.0.0.6 (X11/20071009) MIME-Version: 1.0 To: Jon Smirl CC: Jean Delvare , linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org, Scott Wood , Vitaly Bordug Subject: [PATCHv2] i2c: adds support for i2c bus on Frescale CPM1/CPM2 controllers Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25080 Lines: 930 Using the port of 2.4 code from Vitaly Bordug and the actual algorithm used by the i2c driver of the DBox code on cvs.tuxboc.org from Tmbinc, Gillem (htoa@gmx.net). Renamed i2c-rpx.c and i2c-algo-8xx.c to i2c-cpm.c and converted the driver to an of_platform_driver. Signed-off-by: Jochen Friedrich --- arch/powerpc/boot/dts/mpc8272ads.dts | 10 + arch/powerpc/boot/dts/mpc866ads.dts | 10 + arch/powerpc/boot/dts/mpc885ads.dts | 10 + arch/powerpc/platforms/8xx/mpc885ads_setup.c | 5 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-cpm.c | 786 ++++++++++++++++++++++++++ 7 files changed, 832 insertions(+), 0 deletions(-) create mode 100644 drivers/i2c/busses/i2c-cpm.c diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 7285ca1..7273996 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -215,6 +215,16 @@ linux,network-index = <1>; fsl,cpm-command = <16200300>; }; + + i2c@11860 { + compatible = "fsl,mpc8248-i2c", + "fsl,cpm2-i2c", + "fsl,cpm-i2c"; + reg = <11860 20 8afc 2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <29600000>; + }; }; PIC: interrupt-controller@10c00 { diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index daf9433..80c08bf 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -169,6 +169,16 @@ fsl,cpm-command = <0000>; linux,network-index = <1>; }; + + i2c@860 { + compatible = "fsl,mpc866-i2c", + "fsl,cpm1-i2c", + "fsl,cpm-i2c"; + reg = <860 20 3c80 30>; + interrupts = <10 3>; + interrupt-parent = <&Cpm_pic>; + fsl,cpm-command = <0010>; + }; }; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index 8848e63..fd9c9d7 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -213,6 +213,16 @@ fsl,cpm-command = <0080>; linux,network-index = <2>; }; + + i2c@860 { + compatible = "fsl,mpc885-i2c", + "fsl,cpm1-i2c", + "fsl,cpm-i2c"; + reg = <860 20 3c80 30>; + interrupts = <10>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0010>; + }; }; }; diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index 2cf1b6a..4377521 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -157,6 +157,11 @@ static struct cpm_pin mpc885ads_pins[] = { {CPM_PORTE, 28, CPM_PIN_OUTPUT}, {CPM_PORTE, 29, CPM_PIN_OUTPUT}, #endif + /* I2C */ +#ifdef CONFIG_I2C_8XX + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +#endif }; static void __init init_ioports(void) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c466c6c..5950172 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -114,6 +114,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ help The unit of the TWI clock is kHz. +config I2C_CPM + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" + depends on (CPM1 || CPM2) && I2C && PPC_OF + help + This supports the use of the I2C interface on Freescale + processors with CPM1 or CPM2. + + This driver can also be built as a module. If so, the module + will be called i2c-cpm. + config I2C_DAVINCI tristate "DaVinci I2C driver" depends on ARCH_DAVINCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 81d43c2..a395555 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o +obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c new file mode 100644 index 0000000..f5371c6 --- /dev/null +++ b/drivers/i2c/busses/i2c-cpm.c @@ -0,0 +1,786 @@ +/* + * Freescale CPM1/CPM2 I2C interface. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). + * + * moved into proper i2c interface; + * Brad Parker (brad@heeltoe.com) + * + * (C) 2007 Montavista Software, Inc. + * Vitaly Bordug + * + * RPX lite specific parts of the i2c interface + * Update: There actually isn't anything RPXLite-specific about this module. + * This should work for most any CPM board. The console messages have been + * changed to eliminate RPXLite references. + * + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * moved into proper i2c interface; separated out platform specific + * parts into i2c-8xx.c + * Brad Parker (brad@heeltoe.com) + * + * Parts from dbox2_i2c.c (cvs.tuxbox.org) + * (C) 2000-2001 Tmbinc, Gillem (htoa@gmx.net) + * + * (C) 2007 Montavista Software, Inc. + * Vitaly Bordug + * + * Converted to of_platform_device. Renamed to i2c-cpm.c. + * (C) 2007 Jochen Friedrich + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Try to define this if you have an older CPU (earlier than rev D4) */ +/* However, better use a GPIO based bitbang driver in this case :/ */ +#undef I2C_CHIP_ERRATA + +#define CPM_MAX_READ 513 +#define CPM_MAXBD 4 + +#define CPM_CR_INIT_TRX (0x00) +#define CPM_CR_CLOSE_RXBD (0x07) + +#define I2C_EB (0x10) /* Big endian mode */ + +/* I2C parameter RAM. */ +struct i2c_ram { + ushort rbase; /* Rx Buffer descriptor base address */ + ushort tbase; /* Tx Buffer descriptor base address */ + u_char rfcr; /* Rx function code */ + u_char tfcr; /* Tx function code */ + ushort mrblr; /* Max receive buffer length */ + uint rstate; /* Internal */ + uint rdp; /* Internal */ + ushort rbptr; /* Rx Buffer descriptor pointer */ + ushort rbc; /* Internal */ + uint rxtmp; /* Internal */ + uint tstate; /* Internal */ + uint tdp; /* Internal */ + ushort tbptr; /* Tx Buffer descriptor pointer */ + ushort tbc; /* Internal */ + uint txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +}; + +/* I2C Registers */ +struct i2c_reg { + u8 i2mod; + u8 res1[3]; + u8 i2add; + u8 res2[3]; + u8 i2brg; + u8 res3[3]; + u8 i2com; + u8 res4[3]; + u8 i2cer; + u8 res5[3]; + u8 i2cmr; +}; + +struct cpm_i2c { + char *base; + struct of_device *ofdev; + struct i2c_adapter adap; + uint dp_addr; + int version; /* CPM1=1, CPM2=2 */ + int irq; + int cp_command; + struct i2c_reg __iomem *i2c_reg; + struct i2c_ram __iomem *i2c_ram; + u16 i2c_addr; + wait_queue_head_t i2c_wait; + struct mutex i2c_mutex; /* Protects I2C CPM */ + u_char *txbuf[CPM_MAXBD]; + u_char *rxbuf[CPM_MAXBD]; + u32 txdma[CPM_MAXBD]; + u32 rxdma[CPM_MAXBD]; +}; + +static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id) +{ + struct i2c_adapter *adap; + struct cpm_i2c *cpm; + struct i2c_reg __iomem *i2c_reg; + int i; + + adap = (struct i2c_adapter *) dev_id; + cpm = i2c_get_adapdata(adap); + i2c_reg = cpm->i2c_reg; + + /* Clear interrupt. + */ + i = in_8(&i2c_reg->i2cer); + out_8(&i2c_reg->i2cer, i); + + dev_dbg(&adap->dev, "Interrupt: %x\n", i); + + /* Get 'me going again. + */ + wake_up_interruptible(&cpm->i2c_wait); + + return i ? IRQ_HANDLED : IRQ_NONE; +} + +static void cpm_reset_i2c_params(struct cpm_i2c *cpm) +{ + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + + /* Set up the IIC parameters in the parameter ram. + */ + out_be16(&i2c_ram->tbase, cpm->dp_addr); + out_be16(&i2c_ram->rbase, cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD); + + out_8(&i2c_ram->tfcr, I2C_EB); + out_8(&i2c_ram->rfcr, I2C_EB); + + out_be16(&i2c_ram->mrblr, CPM_MAX_READ); + + out_be32(&i2c_ram->rstate, 0); + out_be32(&i2c_ram->rdp, 0); + out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase)); + out_be16(&i2c_ram->rbc, 0); + out_be32(&i2c_ram->rxtmp, 0); + out_be32(&i2c_ram->tstate, 0); + out_be32(&i2c_ram->tdp, 0); + out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase)); + out_be16(&i2c_ram->tbc, 0); + out_be32(&i2c_ram->txtmp, 0); +} + +static void cpm_i2c_force_close(struct i2c_adapter *adap) +{ + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg; + + dev_dbg(&adap->dev, "cpm_i2c_force_close()\n"); + + cpm_command(cpm->cp_command, CPM_CR_CLOSE_RXBD); + + out_8(&i2c_reg->i2cmr, 0x00); /* Disable all interrupts */ + out_8(&i2c_reg->i2cer, 0xff); +} + +static void cpm_i2c_parse_message(struct i2c_adapter *adap, + struct i2c_msg *pmsg, int num, int tx, int rx) +{ + cbd_t *tbdf, *rbdf; + u_char addr; + u_char *tb; + u_char *rb; + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + int i, dscan; + + tbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->tbase)); + rbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->rbase)); + + /* This chip can't do zero length writes. However, the i2c core uses + them to scan for devices. The best we can do is to convert them + into 1 byte reads */ + + dscan = ((pmsg->len == 0) && (num == 1)); + + addr = pmsg->addr << 1; + if ((pmsg->flags & I2C_M_RD) || dscan) + addr |= 1; + + tb = cpm->txbuf[tx]; + rb = cpm->rxbuf[rx]; + + /* Align read buffer */ + rb = (u_char *) (((ulong) rb + 1) & ~1); + + if ((pmsg->flags & I2C_M_RD) || dscan) { + /* To read, we need an empty buffer of the proper length. + * All that is used is the first byte for address, the remainder + * is just used for timing (and doesn't really have to exist). + */ + tb[0] = addr; /* Device address byte w/rw flag */ + + dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr); + + if (dscan) + tbdf[tx].cbd_datlen = 2; + else + tbdf[tx].cbd_datlen = pmsg->len + 1; + + tbdf[tx].cbd_sc = 0; + + if (!(pmsg->flags & I2C_M_NOSTART)) + tbdf[tx].cbd_sc |= BD_I2C_START; + if (tx + 1 == num) + tbdf[tx].cbd_sc |= BD_SC_LAST | BD_SC_WRAP; + + rbdf[rx].cbd_datlen = 0; + rbdf[rx].cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; + + if (rx + 1 == CPM_MAXBD) + tbdf[rx].cbd_sc |= BD_SC_WRAP; + + eieio(); + tbdf[tx].cbd_sc |= BD_SC_READY; + } else { + tb[0] = addr; /* Device address byte w/rw flag */ + for (i = 0; i < pmsg->len; i++) + tb[i+1] = pmsg->buf[i]; + + dev_dbg(&adap->dev, "cpm_iic_write(abyte=0x%x)\n", addr); + + tbdf[tx].cbd_datlen = pmsg->len + 1; + tbdf[tx].cbd_sc = 0; + + if (!(pmsg->flags & I2C_M_NOSTART)) + tbdf[tx].cbd_sc |= BD_I2C_START; + + if (tx + 1 == num) + tbdf[tx].cbd_sc |= BD_SC_LAST | BD_SC_WRAP; + + eieio(); + tbdf[tx].cbd_sc |= BD_SC_READY | BD_SC_INTRPT; + + dev_dbg(&adap->dev, "tx sc %d %04x\n", + tx, tbdf[tx].cbd_sc); + } +} + +static int cpm_i2c_check_message(struct i2c_adapter *adap, + struct i2c_msg *pmsg, int tx, int rx) +{ + cbd_t *tbdf, *rbdf; + u_char *tb; + u_char *rb; + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + int i; + + tbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->tbase)); + rbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->rbase)); + + tb = cpm->txbuf[tx]; + rb = cpm->rxbuf[rx]; + + /* Align read buffer */ + rb = (u_char *) (((uint) rb + 1) & ~1); + + if (pmsg->flags & I2C_M_RD) { + dev_dbg(&adap->dev, "rx sc %04x, rx sc %04x\n", + tbdf[tx].cbd_sc, rbdf[rx].cbd_sc); + + if (tbdf[tx].cbd_sc & BD_SC_NAK) { + dev_dbg(&adap->dev, "IIC read; No ack\n"); + + if (pmsg->flags & I2C_M_IGNORE_NAK) + return 0; + else + return -EIO; + } + if (rbdf[rx].cbd_sc & BD_SC_EMPTY) { + dev_dbg(&adap->dev, + "IIC read; complete but rbuf empty\n"); + return -EREMOTEIO; + } + if (rbdf[rx].cbd_sc & BD_SC_OV) { + dev_dbg(&adap->dev, "IIC read; Overrun\n"); + return -EREMOTEIO; + } + for (i = 0; i < pmsg->len; i++) + pmsg->buf[i] = rb[i]; + } else { + dev_dbg(&adap->dev, "tx sc %d %04x\n", tx, tbdf[tx].cbd_sc); + + if (tbdf[tx].cbd_sc & BD_SC_NAK) { + dev_dbg(&adap->dev, "IIC write; No ack\n"); + + if (pmsg->flags & I2C_M_IGNORE_NAK) + return 0; + else + return -EIO; + } + if (tbdf[tx].cbd_sc & BD_SC_UN) { + dev_dbg(&adap->dev, "IIC write; Underrun\n"); + return -EIO; + } + if (tbdf[tx].cbd_sc & BD_SC_CL) { + dev_dbg(&adap->dev, "IIC write; Collision\n"); + return -EIO; + } + } + return 0; +} + +static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg; + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + struct i2c_msg *pmsg, *rmsg; + int ret, i; + int tptr; + int rptr; + cbd_t *tbdf, *rbdf; + + if (num > CPM_MAXBD) + return -EINVAL; + + /* Check if we have any oversized READ requests */ + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + if (pmsg->len >= CPM_MAX_READ) + return -EINVAL; + } + + mutex_lock(&cpm->i2c_mutex); + + /* Reset to use first buffer */ + out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase)); + out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase)); + + tbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->tbase)); + rbdf = (cbd_t *) cpm_muram_addr(in_be16(&i2c_ram->rbase)); + + tptr = 0; + rptr = 0; + + while (tptr < num) { + pmsg = &msgs[tptr]; + dev_dbg(&adap->dev, "i2c-algo-cpm.o: " "R: %d T: %d\n", + rptr, tptr); + + cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr); + if (pmsg->flags & I2C_M_RD) + rptr++; + tptr++; + } + /* Start transfer now */ + /* Chip bug, set enable here */ + out_8(&i2c_reg->i2cmr, 0x13); /* Enable RX/TX/Error interupts */ + out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */ + out_8(&i2c_reg->i2mod, in_8(&i2c_reg->i2mod) | 1); /* Enable */ + /* Begin transmission */ + out_8(&i2c_reg->i2com, in_8(&i2c_reg->i2com) | 0x80); + + tptr = 0; + rptr = 0; + + while (tptr < num) { + /* Check for outstanding messages */ + dev_dbg(&adap->dev, "test ready.\n"); + if (!(tbdf[tptr].cbd_sc & BD_SC_READY)) { + dev_dbg(&adap->dev, "ready.\n"); + rmsg = &msgs[tptr]; + ret = cpm_i2c_check_message(adap, rmsg, tptr, rptr); + tptr++; + if (rmsg->flags & I2C_M_RD) + rptr++; + if (ret) { + cpm_i2c_force_close(adap); + mutex_unlock(&cpm->i2c_mutex); + return ret; + } + } else { + dev_dbg(&adap->dev, "not ready.\n"); + ret = wait_event_interruptible_timeout(cpm->i2c_wait, + !(tbdf[tptr].cbd_sc & BD_SC_READY), 1 * HZ); + if (ret == 0) { + cpm_i2c_force_close(adap); + dev_dbg(&adap->dev, "I2C read: timeout!\n"); + mutex_unlock(&cpm->i2c_mutex); + return -EREMOTEIO; + } + } + } +#ifdef I2C_CHIP_ERRATA + /* Chip errata, clear enable. This is not needed on rev D4 CPUs. + Disabling I2C too early may cause too short stop condition */ + udelay(4); + out_8(&i2c_reg->i2mod, in_8(&i2c_reg->i2mod) | ~1); +#endif + mutex_unlock(&cpm->i2c_mutex); + return (num); +} + +static u32 cpm_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +/* -----exported algorithm data: ------------------------------------- */ + +static struct i2c_algorithm cpm_i2c_algo = { + .master_xfer = cpm_i2c_xfer, + .functionality = cpm_i2c_func, +}; + +static const struct i2c_adapter cpm_ops = { + .owner = THIS_MODULE, + .name = "i2c-cpm", + .id = I2C_HW_MPC8XX_EPON, + .algo = &cpm_i2c_algo, + .class = I2C_CLASS_HWMON, +}; + +static int cpm_i2c_setup(struct cpm_i2c *cpm) +{ + struct of_device *ofdev = cpm->ofdev; + const u32 *data; + int len, ret, i; + void __iomem *i2c_base; + cbd_t *tbdf, *rbdf; + unsigned char brg; + + pr_debug("i2c-cpm: cpm_i2c_setup()\n"); + + init_waitqueue_head(&cpm->i2c_wait); + mutex_init(&cpm->i2c_mutex); + + cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL); + if (cpm->irq == NO_IRQ) + return -EINVAL; + + /* Install interrupt handler. + */ + ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c", + &cpm->adap); + if (ret) + goto out_irq; + + /* IIC parameter RAM */ + i2c_base = of_iomap(ofdev->node, 1); + if (i2c_base == NULL) { + ret = -EINVAL; + goto out_irq; + } + + if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) { + + /* Check for and use a microcode relocation patch. */ + cpm->i2c_ram = i2c_base; + cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase); + + /* Maybe should use cpm_muram_alloc instead of hardcoding + * this in micropatch.c */ + if (cpm->i2c_addr) { + cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr); + iounmap(i2c_base); + } + + cpm->version = 1; + + } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) { + cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64); + cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr); + out_be16(i2c_base, cpm->i2c_addr); + iounmap(i2c_base); + + cpm->version = 2; + + } else { + iounmap(i2c_base); + ret = -EINVAL; + goto out_irq; + } + + /* I2C control/status registers */ + cpm->i2c_reg = of_iomap(ofdev->node, 0); + if (cpm->i2c_reg == NULL) { + ret = -EINVAL; + goto out_ram; + } + + data = of_get_property(ofdev->node, "fsl,cpm-command", &len); + if (!data || len != 4) { + ret = -EINVAL; + goto out_reg; + } + cpm->cp_command = *data; + + /* Allocate space for CPM_MAXBD transmit and receive buffer + * descriptors in the DP ram. + */ + cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8); + if (!cpm->dp_addr) { + ret = -ENOMEM; + goto out_reg; + } + + /* Initialize Tx/Rx parameters. */ + + cpm_reset_i2c_params(cpm); + + pr_debug("i2c-cpm: i2c_ram %x, dp_addr 0x%x\n", (uint) cpm->i2c_ram, + cpm->dp_addr); + pr_debug("i2c-cpm: tbase %d, rbase %d\n", + in_be16(&cpm->i2c_ram->tbase), in_be16(&cpm->i2c_ram->rbase)); + + tbdf = (cbd_t *) cpm_muram_addr(in_be16(&cpm->i2c_ram->tbase)); + rbdf = (cbd_t *) cpm_muram_addr(in_be16(&cpm->i2c_ram->rbase)); + + /* Allocate TX and RX buffers */ + + for (i = 0; i < CPM_MAXBD; i++) { + cpm->rxbuf[i] = dma_alloc_coherent( + NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + if (!cpm->rxbuf[i]) { + ret = -ENOMEM; + goto out_muram; + } + rbdf[i].cbd_bufaddr = ((cpm->rxdma[i] + 1) & ~1); + cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( + NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + if (!cpm->txbuf[i]) { + ret = -ENOMEM; + goto out_muram; + } + tbdf[i].cbd_bufaddr = cpm->txdma[i]; + } + + cpm_command(cpm->cp_command, CPM_CR_INIT_TRX); + + /* Select an invalid address. Just make sure we don't use loopback mode + */ + out_8(&cpm->i2c_reg->i2add, 0xfe); + + /* Make clock run at 60 kHz. */ + + brg = get_brgfreq() / (32 * 2 * 60000) - 3; + out_8(&cpm->i2c_reg->i2brg, brg); + + out_8(&cpm->i2c_reg->i2mod, 0x00); + out_8(&cpm->i2c_reg->i2com, 0x01); /* Master mode */ + + /* Disable interrupts. */ + out_8(&cpm->i2c_reg->i2cmr, 0); + out_8(&cpm->i2c_reg->i2cer, 0xff); + + return 0; + +out_muram: + for (i = 0; i < CPM_MAXBD; i++) { + if (cpm->rxbuf[i]) + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->rxbuf[i], cpm->rxdma[i]); + if (cpm->txbuf[i]) + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->txbuf[i], cpm->txdma[i]); + } + cpm_muram_free(cpm->dp_addr); +out_reg: + iounmap(cpm->i2c_reg); +out_ram: + if ((cpm->version == 1) && (!cpm->i2c_addr)) + iounmap(cpm->i2c_ram); + if (cpm->version == 2) + cpm_muram_free(cpm->i2c_addr); +out_irq: + free_irq(cpm->irq, &cpm->adap); + return ret; +} + +static void cpm_i2c_shutdown(struct cpm_i2c *cpm) +{ + int i; + + /* Shut down I2C. */ + out_8(&cpm->i2c_reg->i2mod, in_8(&cpm->i2c_reg->i2mod) | ~1); + + /* Disable interrupts */ + out_8(&cpm->i2c_reg->i2cmr, 0); + out_8(&cpm->i2c_reg->i2cer, 0xff); + + free_irq(cpm->irq, &cpm->adap); + + /* Free all memory */ + for (i = 0; i < CPM_MAXBD; i++) { + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->rxbuf[i], cpm->rxdma[i]); + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->txbuf[i], cpm->txdma[i]); + } + + cpm_muram_free(cpm->dp_addr); + iounmap(cpm->i2c_reg); + + if ((cpm->version == 1) && (!cpm->i2c_addr)) + iounmap(cpm->i2c_ram); + if (cpm->version == 2) + cpm_muram_free(cpm->i2c_addr); + + return; +} + +static void of_register_i2c_devices(struct i2c_adapter *adap, + struct device_node *adap_node) +{ + struct device_node *node = NULL; + + while ((node = of_get_next_child(adap_node, node))) { + struct i2c_board_info info; + const u32 *addr; + const char *compatible; + int len; + + addr = of_get_property(node, "reg", &len); + if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) { + printk(KERN_ERR "i2c-cpm.c: invalid entry, " + "missing reg attribute\n"); + continue; + } + + info.irq = irq_of_parse_and_map(node, 0); + if (info.irq == NO_IRQ) + info.irq = -1; + + compatible = of_get_property(node, "compatible", &len); + if (!compatible) { + printk(KERN_ERR "i2c-cpm.c: invalid entry, " + "missing compatible attribute\n"); + continue; + } + + /* need full alias i2c:NOF,vendor,device */ + strcpy(info.driver_name, I2C_OF_MODULE_PREFIX); + strncat(info.driver_name, compatible, sizeof(info.driver_name)); + request_module(info.driver_name); + + /* need module alias OF,vendor,device */ + strcpy(info.driver_name, OF_I2C_PREFIX); + strncat(info.driver_name, compatible, sizeof(info.driver_name)); + + info.type[0] = '\0'; + info.platform_data = NULL; + info.addr = *addr; + + if (!i2c_new_device(adap, &info)) { + printk(KERN_ERR "i2c-cpm.c: Failed to load driver for " + "%s\n", info.driver_name); + continue; + } + } +} + +static int cpm_i2c_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int result; + struct cpm_i2c *cpm; + + cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL); + if (!cpm) + return -ENOMEM; + + cpm->ofdev = ofdev; + + dev_set_drvdata(&ofdev->dev, cpm); + + cpm->adap = cpm_ops; + i2c_set_adapdata(&cpm->adap, cpm); + cpm->adap.dev.parent = &ofdev->dev; + + result = cpm_i2c_setup(cpm); + if (result) { + printk(KERN_ERR "i2c-cpm: Unable to init hardware\n"); + goto out; + } + + /* register new adapter to i2c module... */ + + result = i2c_add_adapter(&cpm->adap); + if (result < 0) { + printk(KERN_ERR "i2c-cpm: Unable to register with I2C\n"); + goto out2; + } + + pr_debug("i2c-cpm: hw routines for %s registered.\n", cpm->adap.name); + + of_register_i2c_devices(&cpm->adap, ofdev->node); + + return 0; +out2: + cpm_i2c_shutdown(cpm); +out: + dev_set_drvdata(&ofdev->dev, NULL); + kfree(cpm); + + return result; +} + +static int cpm_i2c_remove(struct of_device *ofdev) +{ + struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev); + + i2c_del_adapter(&cpm->adap); + + cpm_i2c_shutdown(cpm); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(cpm); + + return 0; +} + +static struct of_device_id cpm_i2c_match[] = { + { + .compatible = "fsl,cpm-i2c", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, cpm_i2c_match); + +static struct of_platform_driver cpm_i2c_driver = { + .match_table = cpm_i2c_match, + .probe = cpm_i2c_probe, + .remove = __devexit_p(cpm_i2c_remove), + .driver = { + .name = "fsl-i2c-cpm", + .owner = THIS_MODULE, + } +}; + +static int __init cpm_i2c_init(void) +{ + return of_register_platform_driver(&cpm_i2c_driver); +} + +static void __exit cpm_i2c_exit(void) +{ + of_unregister_platform_driver(&cpm_i2c_driver); +} + +module_init(cpm_i2c_init); +module_exit(cpm_i2c_exit); + +MODULE_AUTHOR("Dan Malek "); +MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards"); +MODULE_LICENSE("GPL"); -- 1.5.3.7 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/