Received-SPF: pass (google.com: domain of linux-kernel+bounces-86524-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com>, Alice Guo <alice.guo@nxp.com>, Peng Fan <peng.fan@nxp.com>, Frank Li <Frank.Li@nxp.com>
Subject: Re: [PATCH 2/4] arm64: dts: imx8dxl: add lpuart device in cm40 subsystem
Date: Thu, 29 Feb 2024 11:12:39 +0100
Message-ID: <1889315.CQOukoFCf9@steina-w>
Organization: TQ-Systems GmbH
In-Reply-To: <20240228-m4_lpuart-v1-2-9e6947be15e7@nxp.com>
References: <20240228-m4_lpuart-v1-0-9e6947be15e7@nxp.com> <20240228-m4_lpuart-v1-2-9e6947be15e7@nxp.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset="iso-8859-1"

Hi Frank,

thanks for the patch.

Am Mittwoch, 28. Februar 2024, 20:54:58 CET schrieb Frank Li:
> From: Alice Guo <alice.guo@nxp.com>
>=20
> Adding lpuart device in cm40 subsystem.
>=20
> Signed-off-by: Alice Guo <alice.guo@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 25 +++++++++++++++++++=
++++++
>  1 file changed, 25 insertions(+)
>=20
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64=
/boot/dts/freescale/imx8-ss-cm40.dtsi
> index b1d626862ddf8..ecca5ada224b7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
> @@ -64,4 +64,29 @@ cm40_intmux: intmux@37400000 {
>  		power-domains =3D <&pd IMX_SC_R_M4_0_INTMUX>;
>  		status =3D "disabled";
>  	};
> +
> +	cm40_lpuart: serial@37220000 {
> +		compatible =3D "fsl,imx8qxp-lpuart";
> +		reg =3D <0x37220000 0x1000>;
> +		interrupts =3D <7 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-parent =3D <&cm40_intmux>;

With interrupt-parent set in Patch 1 for the whole subsystem, this line
is not needed anymore.

Best regards,
Alexander

> +		clocks =3D <&cm40_uart_lpcg 1>, <&cm40_uart_lpcg 0>;
> +		clock-names =3D "ipg", "baud";
> +		assigned-clocks =3D <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
> +		assigned-clock-rates =3D <24000000>;
> +		power-domains =3D <&pd IMX_SC_R_M4_0_UART>;
> +		status =3D "disabled";
> +	};
> +
> +	cm40_uart_lpcg: clock-controller@37620000 {
> +		compatible =3D "fsl,imx8qxp-lpcg";
> +		reg =3D <0x37620000 0x1000>;
> +		#clock-cells =3D <1>;
> +		clocks =3D <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
> +			 <&cm40_ipg_clk>;
> +		clock-indices =3D <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
> +		clock-output-names =3D "cm40_lpcg_uart_clk",
> +				     "cm40_lpcg_uart_ipg_clk";
> +		power-domains =3D <&pd IMX_SC_R_M4_0_UART>;
> +	};
>  };
>=20
>=20


=2D-=20
TQ-Systems GmbH | M=FChlstra=DFe 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht M=FCnchen, HRB 105018
Gesch=E4ftsf=FChrer: Detlef Schneider, R=FCdiger Stahl, Stefan Schneider
http://www.tq-group.com/