Received-SPF: pass (google.com: domain of linux-kernel+bounces-88026-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	=?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] arm64: dts: mediatek: mt2712: fix validation errors
Date: Fri,  1 Mar 2024 08:47:41 +0100
Message-Id: <20240301074741.8362-1-zajec5@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Rafał Miłecki <rafal@milecki.pl>

1. Fixup infracfg clock controller binding
   It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl

This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
        from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
        from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 8 ++++----
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi   | 3 ++-
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 0c38f7b51763..234e3b23d7a8 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -129,7 +129,7 @@ ethernet_phy0: ethernet-phy@5 {
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -156,7 +156,7 @@ mdio_pins {
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +182,14 @@ mdio_pins {
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 6d218caa198c..082672efba0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@ topckgen: syscon@10000000 {
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
-- 
2.35.3