Received-SPF: pass (google.com: domain of linux-kernel+bounces-89229-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
Message-ID: <7ac26eb7-2442-4578-9fa8-e1bb59756e6e@linaro.org>
Date: Sat, 2 Mar 2024 00:39:31 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v3] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and
 Power buttons
Content-Language: en-US
To: quic_huliu@quicinc.com, Bjorn Andersson <andersson@kernel.org>,
 Rob Herring <robh@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <20240301-gpio-keys-v3-1-ca664de8775c@quicinc.com>
From: Konrad Dybcio <konrad.dybcio@linaro.org>
Autocrypt: addr=konrad.dybcio@linaro.org; keydata=
 xsFNBF9ALYUBEADWAhxdTBWrwAgDQQzc1O/bJ5O7b6cXYxwbBd9xKP7MICh5YA0DcCjJSOum
 BB/OmIWU6X+LZW6P88ZmHe+KeyABLMP5s1tJNK1j4ntT7mECcWZDzafPWF4F6m4WJOG27kTJ
 HGWdmtO+RvadOVi6CoUDqALsmfS3MUG5Pj2Ne9+0jRg4hEnB92AyF9rW2G3qisFcwPgvatt7
 TXD5E38mLyOPOUyXNj9XpDbt1hNwKQfiidmPh5e7VNAWRnW1iCMMoKqzM1Anzq7e5Afyeifz
 zRcQPLaqrPjnKqZGL2BKQSZDh6NkI5ZLRhhHQf61fkWcUpTp1oDC6jWVfT7hwRVIQLrrNj9G
 MpPzrlN4YuAqKeIer1FMt8cq64ifgTzxHzXsMcUdclzq2LTk2RXaPl6Jg/IXWqUClJHbamSk
 t1bfif3SnmhA6TiNvEpDKPiT3IDs42THU6ygslrBxyROQPWLI9IL1y8S6RtEh8H+NZQWZNzm
 UQ3imZirlPjxZtvz1BtnnBWS06e7x/UEAguj7VHCuymVgpl2Za17d1jj81YN5Rp5L9GXxkV1
 aUEwONM3eCI3qcYm5JNc5X+JthZOWsbIPSC1Rhxz3JmWIwP1udr5E3oNRe9u2LIEq+wH/toH
 kpPDhTeMkvt4KfE5m5ercid9+ZXAqoaYLUL4HCEw+HW0DXcKDwARAQABzShLb25yYWQgRHli
 Y2lvIDxrb25yYWQuZHliY2lvQGxpbmFyby5vcmc+wsGOBBMBCAA4FiEEU24if9oCL2zdAAQV
 R4cBcg5dfFgFAmQ5bqwCGwMFCwkIBwIGFQoJCAsCBBYCAwECHgECF4AACgkQR4cBcg5dfFjO
 BQ//YQV6fkbqQCceYebGg6TiisWCy8LG77zV7DB0VMIWJv7Km7Sz0QQrHQVzhEr3trNenZrf
 yy+o2tQOF2biICzbLM8oyQPY8B///KJTWI2khoB8IJSJq3kNG68NjPg2vkP6CMltC/X3ohAo
 xL2UgwN5vj74QnlNneOjc0vGbtA7zURNhTz5P/YuTudCqcAbxJkbqZM4WymjQhe0XgwHLkiH
 5LHSZ31MRKp/+4Kqs4DTXMctc7vFhtUdmatAExDKw8oEz5NbskKbW+qHjW1XUcUIrxRr667V
 GWH6MkVceT9ZBrtLoSzMLYaQXvi3sSAup0qiJiBYszc/VOu3RbIpNLRcXN3KYuxdQAptacTE
 mA+5+4Y4DfC3rUSun+hWLDeac9z9jjHm5rE998OqZnOU9aztbd6zQG5VL6EKgsVXAZD4D3RP
 x1NaAjdA3MD06eyvbOWiA5NSzIcC8UIQvgx09xm7dThCuQYJR4Yxjd+9JPJHI6apzNZpDGvQ
 BBZzvwxV6L1CojUEpnilmMG1ZOTstktWpNzw3G2Gis0XihDUef0MWVsQYJAl0wfiv/0By+XK
 mm2zRR+l/dnzxnlbgJ5pO0imC2w0TVxLkAp0eo0LHw619finad2u6UPQAkZ4oj++iIGrJkt5
 Lkn2XgB+IW8ESflz6nDY3b5KQRF8Z6XLP0+IEdLOOARkOW7yEgorBgEEAZdVAQUBAQdAwmUx
 xrbSCx2ksDxz7rFFGX1KmTkdRtcgC6F3NfuNYkYDAQgHwsF2BBgBCAAgFiEEU24if9oCL2zd
 AAQVR4cBcg5dfFgFAmQ5bvICGwwACgkQR4cBcg5dfFju1Q//Xta1ShwL0MLSC1KL1lXGXeRM
 8arzfyiB5wJ9tb9U/nZvhhdfilEDLe0jKJY0RJErbdRHsalwQCrtq/1ewQpMpsRxXzAjgfRN
 jc4tgxRWmI+aVTzSRpywNahzZBT695hMz81cVZJoZzaV0KaMTlSnBkrviPz1nIGHYCHJxF9r
 cIu0GSIyUjZ/7xslxdvjpLth16H27JCWDzDqIQMtg61063gNyEyWgt1qRSaK14JIH/DoYRfn
 jfFQSC8bffFjat7BQGFz4ZpRavkMUFuDirn5Tf28oc5ebe2cIHp4/kajTx/7JOxWZ80U70mA
 cBgEeYSrYYnX+UJsSxpzLc/0sT1eRJDEhI4XIQM4ClIzpsCIN5HnVF76UQXh3a9zpwh3dk8i
 bhN/URmCOTH+LHNJYN/MxY8wuukq877DWB7k86pBs5IDLAXmW8v3gIDWyIcgYqb2v8QO2Mqx
 YMqL7UZxVLul4/JbllsQB8F/fNI8AfttmAQL9cwo6C8yDTXKdho920W4WUR9k8NT/OBqWSyk
 bGqMHex48FVZhexNPYOd58EY9/7mL5u0sJmo+jTeb4JBgIbFPJCFyng4HwbniWgQJZ1WqaUC
 nas9J77uICis2WH7N8Bs9jy0wQYezNzqS+FxoNXmDQg2jetX8en4bO2Di7Pmx0jXA4TOb9TM
 izWDgYvmBE8=
In-Reply-To: <20240301-gpio-keys-v3-1-ca664de8775c@quicinc.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit

On 1.03.2024 08:16, Hui Liu via B4 Relay wrote:
> From: Hui Liu <quic_huliu@quicinc.com>
> 
> The Volume Down & Power buttons are controlled by the PMIC via
> the PON hardware, and the Volume Up is connected to a PMIC gpio.
> 
> Enable the necessary hardware and setup the GPIO state for the
> Volume Up gpio key.
> 
> Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
> ---
> Changes in v3:
> - Update the commit more concise and explicit.
> - remove "power-source" property and update the numeric value to defined
> name for "qcom,drive-strength".
> - Link to v2: https://lore.kernel.org/r/20240223-gpio-keys-v2-1-19f48b3d8762@quicinc.com
> 
> Changes in v2:
> - Update the commit description.
> - Link to v1: https://lore.kernel.org/r/20240206-gpio-keys-v1-1-7683799daf8d@quicinc.com
> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 43 ++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index acf145d1d97c..cf8f6d48bfc2 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -9,7 +9,9 @@
>  #define PM7250B_SID 8
>  #define PM7250B_SID1 9
>  
> +#include <dt-bindings/input/linux-event-codes.h>
>  #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  #include "sc7280.dtsi"
>  #include "pm7250b.dtsi"
> @@ -39,6 +41,24 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		label = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&key_vol_up_default>;

These are backwards

> +
> +		key-volume-up {
> +			label = "volume_up";

"Volume Up"?

> +			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;


Documentation/devicetree/bindings/input/gpio-keys.yaml:
linux,input-type:
        default: 1  # EV_KEY

Konrad