Received-SPF: pass (google.com: domain of linux-kernel+bounces-91171-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
From: Robert Marko <robimarko@gmail.com>
To: andersson@kernel.org,
	konrad.dybcio@linaro.org,
	andrew@lunn.ch,
	hkallweit1@gmail.com,
	linux@armlinux.org.uk,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com,
	ansuelsmth@gmail.com,
	linux-arm-msm@vger.kernel.org,
	netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Robert Marko <robimarko@gmail.com>,
	kernel test robot <lkp@intel.com>
Subject: [PATCH net] net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set
Date: Mon,  4 Mar 2024 20:21:36 +0100
Message-ID: <20240304192244.2924407-1-robimarko@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation
will fail.

Upon investigation the issue is that qca807x_gpio() is guarded by a
preprocessor check but then it is called under
if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will
error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has
not been set.

Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 drivers/net/phy/qcom/qca807x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 780c28e2e4aa..62c01076b506 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -732,7 +732,7 @@ static int qca807x_probe(struct phy_device *phydev)
 	priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
 								     "qcom,dac-disable-bias-current-tweak");
 
-	if (IS_ENABLED(CONFIG_GPIOLIB)) {
+#if IS_ENABLED(CONFIG_GPIOLIB)
 		/* Make sure we don't have mixed leds node and gpio-controller
 		 * to prevent registering leds and having gpio-controller usage
 		 * conflicting with them.
@@ -749,7 +749,7 @@ static int qca807x_probe(struct phy_device *phydev)
 			if (ret)
 				return ret;
 		}
-	}
+#endif
 
 	/* Attach SFP bus on combo port*/
 	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
-- 
2.44.0