Received-SPF: pass (google.com: domain of linux-kernel+bounces-94748-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: andy@kernel.org,
	geert@linux-m68k.org,
	robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org,
	andrew@lunn.ch,
	gregory.clement@bootlin.com,
	sebastian.hesselbarth@gmail.com,
	lee@kernel.org
Cc: linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH v5 0/3] auxdisplay: 7-segment LED display
Date: Thu,  7 Mar 2024 12:50:18 +1300
Message-ID: <20240306235021.976083-1-chris.packham@alliedtelesis.co.nz>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

This series adds a driver for a 7-segment LED display.

I think I've addressed all of Andy's feedback in this round. I haven't
heard from the ARM maintainers on any of the previous rounds. At Andy's
request I've dropped the USB LED change as it's not related. I can
submit the dts change separately if required, I've mostly been including
it so there is an in-tree user of the driver I'm adding.

Chris Packham (3):
  auxdisplay: Add 7-segment LED display driver
  dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  ARM: dts: marvell: Add 7-segment LED display on x530

 .../bindings/auxdisplay/gpio-7-segment.yaml   |  55 +++++++++
 .../boot/dts/marvell/armada-385-atl-x530.dts  |  13 +-
 drivers/auxdisplay/Kconfig                    |  11 ++
 drivers/auxdisplay/Makefile                   |   1 +
 drivers/auxdisplay/seg-led-gpio.c             | 112 ++++++++++++++++++
 5 files changed, 191 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/auxdisplay/gpio-7-s=
egment.yaml
 create mode 100644 drivers/auxdisplay/seg-led-gpio.c

--=20
2.43.2