Received-SPF: pass (google.com: domain of linux-kernel+bounces-98118-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Date: Sun, 10 Mar 2024 01:52:01 -0300
Subject: [PATCH net-next 4/4] net: dsa: realtek: add LED drivers for
 rtl8366rb
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240310-realtek-led-v1-4-4d9813ce938e@gmail.com>
References: <20240310-realtek-led-v1-0-4d9813ce938e@gmail.com>
In-Reply-To: <20240310-realtek-led-v1-0-4d9813ce938e@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>, 
 =?utf-8?q?Alvin_=C5=A0ipraga?= <alsi@bang-olufsen.dk>, 
 Andrew Lunn <andrew@lunn.ch>, Florian Fainelli <f.fainelli@gmail.com>, 
 Vladimir Oltean <olteanv@gmail.com>, 
 "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, 
 Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, 
 Luiz Angelo Daros de Luca <luizluca@gmail.com>

This commit introduces LED drivers for rtl8366rb, enabling LEDs to be
described in the device tree using the same format as qca8k. Each port
can configure up to 4 LEDs.

If all LEDs in a group use the default state "keep", they will use the
default behavior after a reset. Changing the brightness of one LED,
either manually or by a trigger, will disable the default hardware
trigger and switch the entire LED group to manually controlled LEDs.
Once in this mode, there is no way to revert to hardware-controlled LEDs
(except by resetting the switch).

Software triggers function as expected with manually controlled LEDs.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/net/dsa/realtek/rtl8366rb.c | 270 ++++++++++++++++++++++++++++++++----
 1 file changed, 246 insertions(+), 24 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index 5ccb1a3a149d..e45773fec17e 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -191,31 +191,21 @@
 	(4 * (led_group))
 #define RTL8366RB_LED_CTRL_MASK(led_group)	\
 	(0xf << RTL8366RB_LED_CTRL_OFFSET(led_group))
-#define RTL8366RB_LED_OFF			0x0
-#define RTL8366RB_LED_DUP_COL			0x1
-#define RTL8366RB_LED_LINK_ACT			0x2
-#define RTL8366RB_LED_SPD1000			0x3
-#define RTL8366RB_LED_SPD100			0x4
-#define RTL8366RB_LED_SPD10			0x5
-#define RTL8366RB_LED_SPD1000_ACT		0x6
-#define RTL8366RB_LED_SPD100_ACT		0x7
-#define RTL8366RB_LED_SPD10_ACT			0x8
-#define RTL8366RB_LED_SPD100_10_ACT		0x9
-#define RTL8366RB_LED_FIBER			0xa
-#define RTL8366RB_LED_AN_FAULT			0xb
-#define RTL8366RB_LED_LINK_RX			0xc
-#define RTL8366RB_LED_LINK_TX			0xd
-#define RTL8366RB_LED_MASTER			0xe
-#define RTL8366RB_LED_FORCE			0xf
 
 /* The RTL8366RB_LED_X_X registers are used to manually set the LED state only
  * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is
  * RTL8366RB_LED_FORCE. Otherwise, it is ignored.
  */
 #define RTL8366RB_LED_0_1_CTRL_REG		0x0432
-#define RTL8366RB_LED_1_OFFSET			6
 #define RTL8366RB_LED_2_3_CTRL_REG		0x0433
-#define RTL8366RB_LED_3_OFFSET			6
+#define RTL8366RB_LED_X_X_CTRL_REG(led_group)	\
+	((led_group) <= 1 ? \
+		RTL8366RB_LED_0_1_CTRL_REG : \
+		RTL8366RB_LED_2_3_CTRL_REG)
+#define RTL8366RB_LED_0_X_CTRL_MASK		GENMASK(5, 0)
+#define RTL8366RB_LED_X_1_CTRL_MASK		GENMASK(11, 6)
+#define RTL8366RB_LED_2_X_CTRL_MASK		GENMASK(5, 0)
+#define RTL8366RB_LED_X_3_CTRL_MASK		GENMASK(11, 6)
 
 #define RTL8366RB_MIB_COUNT			33
 #define RTL8366RB_GLOBAL_MIB_COUNT		1
@@ -359,14 +349,44 @@
 #define RTL8366RB_GREEN_FEATURE_TX	BIT(0)
 #define RTL8366RB_GREEN_FEATURE_RX	BIT(2)
 
+enum rtl8366_led_mode {
+	RTL8366RB_LED_OFF		= 0x0,
+	RTL8366RB_LED_DUP_COL		= 0x1,
+	RTL8366RB_LED_LINK_ACT		= 0x2,
+	RTL8366RB_LED_SPD1000		= 0x3,
+	RTL8366RB_LED_SPD100		= 0x4,
+	RTL8366RB_LED_SPD10		= 0x5,
+	RTL8366RB_LED_SPD1000_ACT	= 0x6,
+	RTL8366RB_LED_SPD100_ACT	= 0x7,
+	RTL8366RB_LED_SPD10_ACT		= 0x8,
+	RTL8366RB_LED_SPD100_10_ACT	= 0x9,
+	RTL8366RB_LED_FIBER		= 0xa,
+	RTL8366RB_LED_AN_FAULT		= 0xb,
+	RTL8366RB_LED_LINK_RX		= 0xc,
+	RTL8366RB_LED_LINK_TX		= 0xd,
+	RTL8366RB_LED_MASTER		= 0xe,
+	RTL8366RB_LED_FORCE		= 0xf,
+
+	__RTL8366RB_LED_MAX
+};
+
+struct rtl8366rb_led {
+	u8 port_num;
+	u8 led_group;
+	struct realtek_priv *priv;
+	struct led_classdev cdev;
+};
+
 /**
  * struct rtl8366rb - RTL8366RB-specific data
  * @max_mtu: per-port max MTU setting
  * @pvid_enabled: if PVID is set for respective port
+ * @leds: per-port and per-ledgroup led info
  */
 struct rtl8366rb {
 	unsigned int max_mtu[RTL8366RB_NUM_PORTS];
 	bool pvid_enabled[RTL8366RB_NUM_PORTS];
+	struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS];
 };
 
 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
@@ -809,6 +829,208 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
 	return 0;
 }
 
+static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv,
+				      u8 led_group,
+				      enum rtl8366_led_mode mode)
+{
+	int ret;
+	u32 val;
+
+	val = mode << RTL8366RB_LED_CTRL_OFFSET(led_group);
+
+	ret = regmap_update_bits(priv->map,
+				 RTL8366RB_LED_CTRL_REG,
+				 RTL8366RB_LED_CTRL_MASK(led_group),
+				 val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port)
+{
+	switch (led_group) {
+	case 0:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 1:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 2:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 3:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	default:
+		return 0;
+	}
+}
+
+static int rb8366rb_get_port_led(struct rtl8366rb_led *led, bool enable)
+{
+	struct realtek_priv *priv = led->priv;
+	u8 led_group = led->led_group;
+	u8 port_num = led->port_num;
+	int ret;
+	u32 val;
+
+	if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+		dev_err(priv->dev, "Invalid LED group %d for port %d",
+			led_group, port_num);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group),
+			  &val);
+	if (ret) {
+		dev_err(priv->dev, "error reading LED on port %d group %d\n",
+			led_group, port_num);
+		return ret;
+	}
+
+	return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num));
+}
+
+static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable)
+{
+	struct realtek_priv *priv = led->priv;
+	u8 led_group = led->led_group;
+	u8 port_num = led->port_num;
+	int ret;
+
+	if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+		dev_err(priv->dev, "Invalid LED group %d for port %d",
+			led_group, port_num);
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(priv->map,
+				 RTL8366RB_LED_X_X_CTRL_REG(led_group),
+				 rtl8366rb_led_group_port_mask(led_group,
+							       port_num),
+				 enable ? 0xffff : 0);
+	if (ret) {
+		dev_err(priv->dev, "error updating LED on port %d group %d\n",
+			led_group, port_num);
+		return ret;
+	}
+
+	/* Change the LED group to manual controlled LEDs if required */
+	ret = rb8366rb_set_ledgroup_mode(priv, led_group, RTL8366RB_LED_FORCE);
+
+	if (ret) {
+		dev_err(priv->dev, "error updating LED GROUP group %d\n",
+			led_group);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev,
+				       enum led_brightness brightness)
+{
+	struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led,
+						 cdev);
+
+	return rb8366rb_set_port_led(led, brightness == LED_ON);
+}
+
+static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp,
+			       struct fwnode_handle *led_fwnode)
+{
+	struct rtl8366rb *rb = priv->chip_data;
+	struct led_init_data init_data = { };
+	struct rtl8366rb_led *led;
+	enum led_default_state state;
+	u32 led_group;
+	int ret;
+
+	ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group);
+	if (ret)
+		return ret;
+
+	if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+		dev_warn(priv->dev, "Invalid LED reg %d defined for port %d",
+			 led_group, dp->index);
+		return -EINVAL;
+	}
+
+	led = &rb->leds[dp->index][led_group];
+	led->port_num = dp->index;
+	led->led_group = led_group;
+	led->priv = priv;
+
+	state = led_init_default_state_get(led_fwnode);
+	switch (state) {
+	case LEDS_DEFSTATE_ON:
+		led->cdev.brightness = 1;
+		rb8366rb_set_port_led(led, 1);
+		break;
+	case LEDS_DEFSTATE_KEEP:
+		led->cdev.brightness =
+			rb8366rb_get_port_led(led, 1);
+		break;
+	case LEDS_DEFSTATE_OFF:
+	default:
+		led->cdev.brightness = 0;
+		rb8366rb_set_port_led(led, 0);
+	}
+
+	led->cdev.max_brightness = 1;
+	led->cdev.brightness_set_blocking =
+		rtl8366rb_cled_brightness_set_blocking;
+	init_data.fwnode = led_fwnode;
+	init_data.devname_mandatory = true;
+
+	init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d",
+					 dp->ds->index, dp->index, led_group);
+	if (!init_data.devicename)
+		return -ENOMEM;
+
+	ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data);
+	if (ret) {
+		dev_warn(priv->dev, "Failed to init LED %d for port %d",
+			 led_group, dp->index);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_setup_leds(struct realtek_priv *priv)
+{
+	struct device_node *leds_np, *led_np;
+	struct dsa_switch *ds = &priv->ds;
+	struct dsa_port *dp;
+	int ret;
+
+	dsa_switch_for_each_port(dp, ds) {
+		if (!dp->dn)
+			continue;
+
+		leds_np = of_get_child_by_name(dp->dn, "leds");
+		if (!leds_np) {
+			dev_dbg(priv->dev, "No leds defined for port %d",
+				dp->index);
+			continue;
+		}
+
+		for_each_child_of_node(leds_np, led_np) {
+			ret = rtl8366rb_setup_led(priv, dp,
+						  of_fwnode_handle(led_np));
+			if (ret) {
+				of_node_put(led_np);
+				break;
+			}
+		}
+
+		of_node_put(leds_np);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
 static int rtl8366rb_setup(struct dsa_switch *ds)
 {
 	struct realtek_priv *priv = ds->priv;
@@ -817,7 +1039,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	u32 chip_ver = 0;
 	u32 chip_id = 0;
 	int jam_size;
-	u32 val;
 	int ret;
 	int i;
 
@@ -1017,14 +1238,15 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 				   0);
 
 		for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
-			val = RTL8366RB_LED_OFF << RTL8366RB_LED_CTRL_OFFSET(i);
-			ret = regmap_update_bits(priv->map,
-						 RTL8366RB_LED_CTRL_REG,
-						 RTL8366RB_LED_CTRL_MASK(i),
-						 val);
+			ret = rb8366rb_set_ledgroup_mode(priv, i,
+							 RTL8366RB_LED_OFF);
 			if (ret)
 				return ret;
 		}
+	} else {
+		ret = rtl8366rb_setup_leds(priv);
+		if (ret)
+			return ret;
 	}
 
 	ret = rtl8366_reset_vlan(priv);

-- 
2.44.0