Received-SPF: pass (google.com: domain of linux-kernel+bounces-98279-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Mon, 11 Mar 2024 02:45:41 +0900
From: Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Lorenzo Pieralisi <lpieralisi@kernel.org>,
	Rob Herring <robh@kernel.org>, Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH] PCI: qcom: Enable BDF to SID translation properly
Message-ID: <20240310174541.GA2765217@rocinante>
References: <20240307-pci-bdf-sid-fix-v1-1-9423a7e2d63c@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240307-pci-bdf-sid-fix-v1-1-9423a7e2d63c@linaro.org>

Hello,

> Qcom SoCs making use of ARM SMMU require BDF to SID translation table in
> the driver to properly map the SID for the PCIe devices based on their BDF
> identifier. This is currently achieved with the help of
> qcom_pcie_config_sid_1_9_0() function for SoCs supporting the 1_9_0 config.
> 
> But With newer Qcom SoCs starting from SM8450, BDF to SID translation is
> set to bypass mode by default in hardware. Due to this, the translation
> table that is set in the qcom_pcie_config_sid_1_9_0() is essentially
> unused and the default SID is used for all endpoints in SoCs starting from
> SM8450.
> 
> This is a security concern and also warrants swapping the DeviceID in DT
> while using the GIC ITS to handle MSIs from endpoints. The swapping is
> currently done like below in DT when using GIC ITS:
> 
> 			/*
> 			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
> 			 * Hence, the IDs are swapped.
> 			 */
> 			msi-map = <0x0 &gic_its 0x5981 0x1>,
> 				  <0x100 &gic_its 0x5980 0x1>;
> 
> Here, swapping of the DeviceIDs ensure that the endpoint with BDF (1:0.0)
> gets the DeviceID 0x5980 which is associated with the default SID as per
> the iommu mapping in DT. So MSIs were delivered with IDs swapped so far.
> But this also means the Root Port (0:0.0) won't receive any MSIs (for PME,
> AER etc...)
> 
> So let's fix these issues by clearing the BDF to SID bypass mode for all
> SoCs making use of the 1_9_0 config. This allows the PCIe devices to use
> the correct SID, thus avoiding the DeviceID swapping hack in DT and also
> achieving the isolation between devices.

Applied to controller/qcom, thank you!

[1/1] PCI: qcom: Enable BDF to SID translation properly
      https://git.kernel.org/pci/pci/c/b9bc750e1193

	Krzysztof