Received-SPF: pass (google.com: domain of linux-kernel+bounces-98961-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Message-ID: <0bbdb132-4cf4-4278-b887-28e06fa97b9f@linaro.org>
Date: Mon, 11 Mar 2024 15:29:34 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
From: Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH 3/3] arch: arm64: dts: sm8650-hdk: add support for the
 Display Card overlay
Content-Language: en-US, fr
To: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
 Bjorn Andersson <andersson@kernel.org>,
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <20240223-topic-sm8650-upstream-hdk-v1-0-ccca645cd901@linaro.org>
 <20240223-topic-sm8650-upstream-hdk-v1-3-ccca645cd901@linaro.org>
 <2aa5d81b-c7fe-14e0-40b8-80ef5ba364cb@linaro.org>
Autocrypt: addr=neil.armstrong@linaro.org; keydata=
 xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP
 GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4
 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9
 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik
 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB
 AAHNKk5laWwgQXJtc3Ryb25nIDxuZWlsLmFybXN0cm9uZ0BsaW5hcm8ub3JnPsLAkQQTAQoA
 OwIbIwULCQgHAwUVCgkICwUWAgMBAAIeAQIXgBYhBInsPQWERiF0UPIoSBaat7Gkz/iuBQJk
 Q5wSAhkBAAoJEBaat7Gkz/iuyhMIANiD94qDtUTJRfEW6GwXmtKWwl/mvqQtaTtZID2dos04
 YqBbshiJbejgVJjy+HODcNUIKBB3PSLaln4ltdsV73SBcwUNdzebfKspAQunCM22Mn6FBIxQ
 GizsMLcP/0FX4en9NaKGfK6ZdKK6kN1GR9YffMJd2P08EO8mHowmSRe/ExAODhAs9W7XXExw
 UNCY4pVJyRPpEhv373vvff60bHxc1k/FF9WaPscMt7hlkbFLUs85kHtQAmr8pV5Hy9ezsSRa
 GzJmiVclkPc2BY592IGBXRDQ38urXeM4nfhhvqA50b/nAEXc6FzqgXqDkEIwR66/Gbp0t3+r
 yQzpKRyQif3OwE0ETVkGzwEIALyKDN/OGURaHBVzwjgYq+ZtifvekdrSNl8TIDH8g1xicBYp
 QTbPn6bbSZbdvfeQPNCcD4/EhXZuhQXMcoJsQQQnO4vwVULmPGgtGf8PVc7dxKOeta+qUh6+
 SRh3vIcAUFHDT3f/Zdspz+e2E0hPV2hiSvICLk11qO6cyJE13zeNFoeY3ggrKY+IzbFomIZY
 4yG6xI99NIPEVE9lNBXBKIlewIyVlkOaYvJWSV+p5gdJXOvScNN1epm5YHmf9aE2ZjnqZGoM
 Mtsyw18YoX9BqMFInxqYQQ3j/HpVgTSvmo5ea5qQDDUaCsaTf8UeDcwYOtgI8iL4oHcsGtUX
 oUk33HEAEQEAAcLAXwQYAQIACQUCTVkGzwIbDAAKCRAWmrexpM/4rrXiB/sGbkQ6itMrAIfn
 M7IbRuiSZS1unlySUVYu3SD6YBYnNi3G5EpbwfBNuT3H8//rVvtOFK4OD8cRYkxXRQmTvqa3
 3eDIHu/zr1HMKErm+2SD6PO9umRef8V82o2oaCLvf4WeIssFjwB0b6a12opuRP7yo3E3gTCS
 KmbUuLv1CtxKQF+fUV1cVaTPMyT25Od+RC1K+iOR0F54oUJvJeq7fUzbn/KdlhA8XPGzwGRy
 4zcsPWvwnXgfe5tk680fEKZVwOZKIEuJC3v+/yZpQzDvGYJvbyix0lHnrCzq43WefRHI5XTT
 QbM0WUIBIcGmq38+OgUsMYu4NzLu7uZFAcmp6h8g
Organization: Linaro Developer Services
In-Reply-To: <2aa5d81b-c7fe-14e0-40b8-80ef5ba364cb@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit

On 03/03/2024 00:32, Vladimir Zapolskiy wrote:
> Hi Neil,
> 
> On 2/23/24 10:52, Neil Armstrong wrote:
>> With the SM8650-HDK, a Display Card kit can be connected to provide
>> a VTDR6130 display with Goodix Berlin Touch controller.
>>
>> In order to route the DSI lanes to the connector for the Display
>> Card kit, a switch must be changed on the board.
>>
>> The HDMI nodes are disabled since the DSI lanes are shared with
>> the DSI to HDMI transceiver.
>>
>> Add support for this card as an overlay and apply it it at
>> build-time to the sm8650-hdk dtb.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
> 
> <snip>
> 
>> +    mdp_vsync_active: mdp-vsync-active-state {
>> +        pins = "gpio86";
>> +        function = "mdp_vsync";
>> +        drive-strength = <2>;
>> +        bias-pull-down;
>> +    };
>> +
>> +    mdp_vsync_suspend: mdp-vsync-suspend-state {
>> +        pins = "gpio86";
>> +        function = "mdp_vsync";
>> +        drive-strength = <2>;
>> +        bias-pull-down;
>> +    };
> 
> If you have a single pin configuration for active and suspend states,
> then likely you may have only one device tree node here.
> 
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
> 
> I don't add my Tested-by tag, since I don't get a panel working on 6.8.0-rc6,
> while in runtime MSM and DSI are enabled, the panel driver is not initialized:
> 
>    panel-visionox-vtdr6130 ae94000.dsi.0: Failed to initialize panel: -22

This is unrelated to to the HDK, it requires this:
https://lore.kernel.org/all/20240201-visionox-vtdr-prev-first-v2-1-32db52867624@quicinc.com/
that has been applied fr next release.

Thanks,

Neil

> 
> -- 
> Best wishes,
> Vladimir