Message-ID: <47822850.1030007@panasas.com>
Date: Mon, 07 Jan 2008 15:25:36 +0200
From: Boaz Harrosh <bharrosh@panasas.com>
User-Agent: Thunderbird 2.0.0.9 (X11/20071031)
MIME-Version: 1.0
To: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
CC: benh@kernel.crashing.org, james.bottomley@steeleye.com,
       linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
       rdreier@cisco.com, linux-scsi@vger.kernel.org, rmk@arm.linux.org.uk,
       davem@davemloft.net, ralf@linux-mips.org,
       Christoph Hellwig <hch@infradead.org>,
       Benny Halevy <bhalevy@panasas.com>
Subject: Re: [PATCH 2/2] scsi: Use new __dma_buffer to align sense buffer
 in scsi_cmnd
References: <20071221023011.4C4BADDDFA@ozlabs.org>	<476E41D1.50606@panasas.com> <20080107155332J.fujita.tomonori@lab.ntt.co.jp>
In-Reply-To: <20080107155332J.fujita.tomonori@lab.ntt.co.jp>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 6899
Lines: 150

On Mon, Jan 07 2008 at 8:53 +0200, FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> wrote:
> On Sun, 23 Dec 2007 13:09:05 +0200
> Boaz Harrosh <bharrosh@panasas.com> wrote:
> 
>> On Fri, Dec 21 2007 at 4:30 +0200, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
>>> The sense buffer ins scsi_cmnd can nowadays be DMA'ed into directly
>>> by some low level drivers (that typically happens with USB mass
>>> storage).
>>>
>>> This is a problem on non cache coherent architectures such as
>>> embedded PowerPCs where the sense buffer can share cache lines with
>>> other structure members, which leads to various forms of corruption.
>>>
>>> This uses the newly defined __dma_buffer annotation to enforce that
>>> on such platforms, the sense_buffer is contained within its own
>>> cache line. This has no effect on cache coherent architectures.
>>>
>>> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>> ---
>>>
>>>  include/scsi/scsi_cmnd.h |    2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> --- linux-merge.orig/include/scsi/scsi_cmnd.h	2007-12-21 13:07:14.000000000 +1100
>>> +++ linux-merge/include/scsi/scsi_cmnd.h	2007-12-21 13:07:29.000000000 +1100
>>> @@ -88,7 +88,7 @@ struct scsi_cmnd {
>>>  				   	   working on */
>>>  
>>>  #define SCSI_SENSE_BUFFERSIZE 	96
>>> -	unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE];
>>> +	unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE] __dma_buffer;
>>>  				/* obtained by REQUEST SENSE when
>>>  				 * CHECK CONDITION is received on original
>>>  				 * command (auto-sense) */
>> This has the potential of leaving a big fat ugly hole in the middle of 
>> scsi_cmnd. I would suggest of *just* moving the sense_buffer array to be
>> the *first member* of struct scsi_cmnd. The command itself is already cache
>> aligned, allocated by the proper flags to it's slab. And put a fat comment
>> near it's definition.
>>
>> This is until a proper fix is sent. I have in my Q a proposition for a 
>> more prominent solution, which I will send next month. Do to short comings
>> in the sense handling and optimizations, but should definitely cover this
>> problem.
>>
>> The code should have time to be discussed and tested, so it is only 2.6.26
>> material. For the duration of the 2.6.25 kernel we can live with a reorder
>> of scsi_cmnd members, if it solves such a grave bug for some ARCHs.
>>
>> Boaz
>> ----
>> [RFD below]
>> My proposed solution will be has follows:
>>
>>  1. Since the scsi protocol mandates an immediate REQUEST_SENSE after an error
>>     in effect the Q is frozen until the REQUEST_SENSE command returns.
>>
>>  2. The scsi-ml needs the sense buffer for its normal operation, independent 
>>     from the ULD's request of the sence_buffer or not at request->sense. But
>>     in effect, 90% of all scsi-requests come with ULD's allocated buffer for
>>     sense, that is copied to, on command completion.
>>
>>  3. 99% of all commands complete successfully, so if an optimization is 
>>     proposed for the successful case, sacrificing a few cycles for the error
>>     case than thats a good thing.
>>
>>  My suggestion is to have a per Q, driver-overridable, sense buffer that is 
>>  DMAed/written to by drivers. At the end of the REQUEST_SENSE command one
>>  of 2 things will be done. Either copy the sense to the ULD's supplied buffer,
>>  or if not available, allocate one from a dedicated mem_cache pool.
>>  
>>  So we are completely saving 92 bytes from scsi_cmnd by replacing the buffer
>>  with a pointer. We can always read the sense into a per Q buffer. And 10% of
>>  %1 of the times we will need to allocate a sense buffer from a dedicated mem_cache
>>  I would say thats a nice optimization.
>>
>>  The changes to scsi_error/scsi_cmnd and friends, is pretty strait forward. But
>>  it depends on a conversion of 4/5 drivers to the new scsi_eh API for 
>>  REQUEST_SENSE. I have only converted these drivers that interfered with the accessors
>>  effort + 1 other places. But there are a few more places that are not converted.
>>  Once done. The implementation can easily change with no affect on drivers.
> 
> I think that removing the sense_buffer array from scsi_cmnd effects
> lots of LLDs. As I wrote in other mail, many LLDs assume that
> scsi_cmnd:sense_buffer is always available. Another big task is to
> take care about auto sense.
> 
> Have you already had some patches? I've just started to work on this
> and I'd like to push that fix into 2.6.25.

Tomo Hi.
Since you ask to push this into 2.6.25, I have ask permission to
prioritize this effort, as until now it was on a back burner.

I have only done 3 drivers up to now. (out of something like 15)

I have seen 4 patterns of "sense" use.

1. Driver allocated sense that is memcpy'ed in interrupt time to
   cmnd->sense.
   The sense is automatically fetched by controller and is
   usually pre-mapped.

2. dma-map of cmnd->sense prior to each command. similar to case-1
   but DMAed directly into cmnd->sense buffer. (AutoSense)

3. Synchronous request for sense, like the places I sent patches
   for. Where cmnd is re-used to map the REQUEST_SENSE read.

4. Do nothing and let scsi_error issue a request sense asynchronously.

What I did until now is, added a new API for case 1 - scsi_eh_cpy_sense(...) ,
and 3,4 are covered by the existing (new) APIs. Case-2 is hardest and I'll
fix it per-driver-case, like in iscsi it was very easy as it already have
a per command structure allocated.

I have not yet converted the scsi midlayer to any new system but my plan
is:

Stage 1
1. convert all drivers to some new/old API where:
   Those drivers with case-2 above, that can DMA_FROM_DEVICE 
   concurrently into more than one sense buffer, will change 
   specifically, to pre-allocate a can_queue number of buffers.

2. Change mid-layer to:
  a. Pre-allocate one dma-able sense buffer per Q.
  b. copy sense out of above, directly into ULD's allocated sense
     buffer which was put on cmnd->request->sense
  c. Those very *few* requests that come without ULD allocated
     sense, allocate one for them out of a mempool.
     (All regular file-system ULDs allocate a sense buffer)

Stage 2
 I think I can see a way how to shuffle the mid-layer post-sense processing
 directly in copy-sense time. So in case ULD did not "request sense" the
 buffer can be discarded. But I'm not 100% sure about that.

Let me write up a sketch of what I mean which will include 3 drivers
that demonstrate above cases, and the mid-layer changes.
Then we can discus it and see if it makes sense (;)) to every body.
But let me have time until tomorrow night for that.

Boaz
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/