Received-SPF: pass (google.com: domain of linux-kernel+bounces-101305-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Wed, 13 Mar 2024 12:53:11 +0300
From: Dmitry Rokosov <ddrokosov@salutedevices.com>
To: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@kernel.org>
CC: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Neil
 Armstrong <neil.armstrong@linaro.org>, Martin Blumenstingl
	<martin.blumenstingl@googlemail.com>, Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>, Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: Re: [DMARC error][DKIM error] [PATCH 3/4] arm64: dts: add support
 for A4 based Amlogic BA400
Message-ID: <20240313095311.dxrr7gvt4t3gwoho@CAB-WSD-L081021>
References: <20240312-basic_dt-v1-0-7f11df3a0896@amlogic.com>
 <20240312-basic_dt-v1-3-7f11df3a0896@amlogic.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20240312-basic_dt-v1-3-7f11df3a0896@amlogic.com>
User-Agent: NeoMutt/20220415

Hello Xianwei,

On Tue, Mar 12, 2024 at 05:18:59PM +0800, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
> 
> Amlogic A4 is an application processor designed for smart audio
> and IoT applications.
> 
> Add basic support for the A4 based Amlogic BA400 board, which describes
> the following components: CPU, GIC, IRQ, Timer and UART.
> These are capable of booting up into the serial console.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile               |  1 +
>  .../boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts   | 43 ++++++++++
>  arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 99 ++++++++++++++++++++++
>  3 files changed, 143 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 1ab160bf928a..9a50ec11bb8d 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
> new file mode 100644
> index 000000000000..60f9f23858c6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-a4.dtsi"
> +
> +/ {
> +	model = "Amlogic A113L2 ba400 Development Board";
> +	compatible = "amlogic,ba400","amlogic,a4";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_b;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x40000000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* 52 MiB reserved for ARM Trusted Firmware */
> +		secmon_reserved:linux,secmon {
> +			compatible = "shared-dma-pool";
> +			no-map;
> +			alignment = <0x0 0x400000>;
> +			reg = <0x0 0x05000000 0x0 0x3400000>;
> +		};
> +	};
> +};
> +
> +&uart_b {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> new file mode 100644
> index 000000000000..7e8745010b52
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/gpio.h>
> +/ {
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller@fff01000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x2000>,
> +			      <0x0 0xfff04000 0 0x2000>,
> +			      <0x0 0xfff06000 0 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		apb@fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_b: serial@7a000 {
> +				compatible = "amlogic,meson-s4-uart",

If I'm not wrong, you need to create dt-binding alias for meson-a4-uart
and use it as 3rd compatible string.

> +					     "amlogic,meson-ao-uart";
> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +				status = "disabled";
> +			};
> +		};
> +	};
> +};
> 
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry