Received-SPF: pass (google.com: domain of linux-kernel+bounces-103064-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Precedence: bulk
MIME-Version: 1.0
References: <20240313123017.362570-1-sumit.garg@linaro.org>
 <20240313123017.362570-4-sumit.garg@linaro.org> <4a0a8db7-a2bc-4c99-94b2-c13facbd1bef@linaro.org>
 <CAFA6WYPh5BS_Fpi6ksAC7bwoFEyqjj1Y3EahyQxCG9Pp=KDw=Q@mail.gmail.com>
 <9dc0415c-4138-4867-861a-38b45b636182@linaro.org> <CAFA6WYPFfL18acdZt6O-_=LWnH7J2MooDuf9cA3JCaQZdoLhVA@mail.gmail.com>
In-Reply-To: <CAFA6WYPFfL18acdZt6O-_=LWnH7J2MooDuf9cA3JCaQZdoLhVA@mail.gmail.com>
From: Sumit Garg <sumit.garg@linaro.org>
Date: Thu, 14 Mar 2024 15:06:43 +0530
Message-ID: <CAFA6WYNo73S5ROHCMK0ZQSiU0DDbuDadptmaPL+GPCocE0h-mA@mail.gmail.com>
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC
 board DTS
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
	andersson@kernel.org, konrad.dybcio@linaro.org, robh+dt@kernel.org, 
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, stephan@gerhold.net, 
	caleb.connolly@linaro.org, neil.armstrong@linaro.org, 
	laetitia.mariottini@se.com, pascal.eberhard@se.com, abdou.saker@se.com, 
	jimmy.lalande@se.com, benjamin.missey@non.se.com, daniel.thompson@linaro.org, 
	linux-kernel@vger.kernel.org, Jagdish Gediya <jagdish.gediya@linaro.org>
Content-Type: text/plain; charset="UTF-8"

On Thu, 14 Mar 2024 at 14:47, Sumit Garg <sumit.garg@linaro.org> wrote:
>
> On Thu, 14 Mar 2024 at 14:00, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
> >
> > >>> +
> > >>> +             compatible = "gpio-leds";
> > >>> +             #address-cells = <1>;
> > >>> +             #size-cells = <0>;
> > >>
> > >> That's not a bus.
> > >>
> > >> It does not look like you tested the DTS against bindings. Please run
> > >> `make dtbs_check W=1` (see
> > >> Documentation/devicetree/bindings/writing-schema.rst or
> > >> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> > >> for instructions).
> > >
> > > I assumed earlier that W=1 is sufficient for DT schema checks but it
> >
> > W=1 as in make? No, it is not. It's flag changing the build process.
> > dtbs_check is separate target.
> >
> > > looks like those are two different entities. However, I added these
> > > address and size cells properties only to get rid of warnings reported
> > > by W=1, see below:
> > >
> > > $ make qcom/apq8016-schneider-hmibsc.dtb W=1
> > >   DTC     arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb
> > > arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts:96.9-103.5:
> > > Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but
> > > no reg or ranges property
> > > arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts:105.9-112.5:
> > > Warning (unit_address_vs_reg): /leds/led@6: node has a unit name, but
> > > no reg or ranges property
> >
> > Wait, so you saw the warnings and ignored them?
>
> Sorry but you are ignoring what I am trying to say.
>
> > These are legitimate
> > warnings, although they don't give you full answer.
> >
> > > <snip>
> > >
> > > So it looks like W=1 is reporting false warnings and we should rather
> >
> > Warnings were true.
> >
>
> That's was my initial impression too and I fixed them via following diff:
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> index 8f9cacf8de89..a366d3aff3c5 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> @@ -92,8 +92,11 @@ leds {
>                 pinctrl-0 = <&pm8916_mpps_leds>;
>
>                 compatible = "gpio-leds";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
>
>                 led@5 {
> +                       reg = <5>;
>                         label = "apq8016-hmibsc:green:wlan";
>                         function = LED_FUNCTION_WLAN;
>                         color = <LED_COLOR_ID_YELLOW>;
> @@ -103,6 +106,7 @@ led@5 {
>                 };
>
>                 led@6 {
> +                       reg = <6>;
>                         label = "apq8016-hmibsc:yellow:bt";
>                         function = LED_FUNCTION_BLUETOOTH;
>                         color = <LED_COLOR_ID_BLUE>;
>
> But it then broke dtbs_check.

See following breakage afterwards:

$ make qcom/apq8016-schneider-hmibsc.dtb dtbs_check
<snip>
/home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
leds: led@5: Unevaluated properties are not allowed ('reg' was
unexpected)
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
/home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
leds: led@6: Unevaluated properties are not allowed ('reg' was
unexpected)
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
/home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
leds: '#address-cells', '#size-cells' do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
<snip>

> Are you aware of any other saner way to
> fix those warnings properly?
>

-Sumit