Received-SPF: pass (google.com: domain of linux-kernel+bounces-103368-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Sergey Khimich <serghox@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Jyan Chou <jyanchou@realtek.com>
Subject: [PATCH v6 0/2] mmc: sdhci-of-dwcmshc: Add CQE support
Date: Thu, 14 Mar 2024 17:14:38 +0300
Message-Id: <20240314141440.3305802-1-serghox@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Hello!

This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.

Also, while implementing CQE support for the driver, I faced with a problem
which I will describe below.
According to the IP block documentation CQE works only with "AMDA-2 only"
mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
platform data.

So my question is: is it correct to enable v4 mode for all platform data
if 'SDHCI_CAN_64BIT_V4' bit is set in hw?

Because I`m afraid that enabling v4 mode for some platforms could break
them down. On the other hand, if host controller says that it can do v4
(caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
quirk. Anyway - RFC.


v2:
 - Added dwcmshc specific cqe_disable hook to prevent losing
   in-flight cmd when an ioctl is issued and cqe_disable is called;

 - Added processing 128Mb boundary for the host memory data buffer size
   and the data buffer. For implementing this processing an extra
   callback is added to the struct 'sdhci_ops'.

 - Fixed typo.

v3:
 - Fix warning reported by kernel test robot:
        | Reported-by: kernel test robot <lkp@intel.com>
        | Closes: https://lore.kernel.org/oe-kbuild-all/202309270807.VoVn81m6-lkp@intel.com/
        | Closes: https://lore.kernel.org/oe-kbuild-all/202309300806.dcR19kcE-lkp@intel.com/

v4:
 - Data reset moved to custom driver tuning hook.
 - Removed unnecessary dwcmshc_sdhci_cqe_disable() func
 - Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
   cqhci_set_tran_desc() instead.
 - Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
 - Fix typo: int_clok_disable --> int_clock_disable

v5:
 - Fix warning reported by kernel test robot:
	| Reported-by: kernel test robot <lkp@intel.com>
	| Closes: https://lore.kernel.org/oe-kbuild-all/202312301130.itEZhhI5-lkp@intel.com/

v6:
 - Rebase to master branch
 - Fix typo;
 - Fix double blank line;
 - Add cqhci_suspend() and cqhci_resume() functions
   to support mmc suspend-to-ram (s2r);
 - Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
   condition as not all IPs have that register;
 - Remove sdhci V4 mode from the list of prerequisites to init cqhci.


Sergey Khimich (2):
  mmc: cqhci: Add cqhci set_tran_desc() callback
  mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support

 drivers/mmc/host/Kconfig            |   1 +
 drivers/mmc/host/cqhci-core.c       |  11 +-
 drivers/mmc/host/cqhci.h            |   4 +
 drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
 4 files changed, 199 insertions(+), 5 deletions(-)

-- 
2.30.2