Received-SPF: pass (google.com: domain of linux-kernel+bounces-107945-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Kamil Kasperski <ressetkk@gmail.com>
Subject: [PATCH v4 0/3] Add initial support for T95 TV boxes
Date: Tue, 19 Mar 2024 18:50:21 +0100
Message-Id: <20240319-add-t95-axp313-support-v4-0-6204b6d23229@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
To: Rob Herring <robh@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>, 
 Jernej Skrabec <jernej.skrabec@gmail.com>, 
 Samuel Holland <samuel@sholland.org>, Maxime Ripard <mripard@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, 
 linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, 
 Kamil Kasperski <ressetkk@gmail.com>, 
 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Changes in v4:
- change wifi pwrseq node name to 'pwrseq' in sun50i-h616-t95.dtsi
- replace vcc-pg-supply value to reg_aldo1 in &pio

- Link to v3: https://lore.kernel.org/r/20240317-add-t95-axp313-support-v3-0-0d63f7c23d37@gmail.com

Changes in v3:
- remove underscore from wifi_pwrseq node name in sun50i-h616-t95.dtsi
- fix line wrap in commit message
- Link to v2: https://lore.kernel.org/r/20240317-add-t95-axp313-support-v2-0-e38032811758@gmail.com

T95 is a most commonly known for being a box with a pre-installed 
malware. It uses Allwinner H616 and comes with NAND, and DDR3 
memory.

Those TV boxes usually come with common hardware:
- Allwinner H616 SoC
- 2/4 GB DDR3 SDRAM (Hynix H5TQ2G43BFR)
- 16/32/64 GB NAND flash
- microSD slot
- AXP305 or AXP313 PMIC depending on board revision
- 3.5mm A/V output
- HDMI port
- 2x USB 2.0 ports
- 100M ETH using Internal PHY
- LG642 Wi-Fi and BT chip (rebranded BCM43342)
- 7-segment display
- DC 5V barrel jack port

The board contains holes hor UART header wired to &uart0.
&uart1 is used by bluetooth module

From the DRAM specification its operation voltage is 1.5V.

To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <mripard@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev

Signed-off-by: Kamil Kasperski <ressetkk@gmail.com>
---
Kamil Kasperski (3):
      dt-bindings: vendor-prefixes: add t95 string
      dt-bindings: arm: sunxi: add T95 AXP313
      arm64: dts: allwinner: h616: add support for T95 tv boxes

 Documentation/devicetree/bindings/arm/sunxi.yaml   |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/allwinner/Makefile             |   1 +
 arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++
 .../dts/allwinner/sun50i-h616-t95max-axp313.dts    |  84 ++++++++++++++++
 5 files changed, 201 insertions(+)
---
base-commit: 4138f02288333cb596885e9af03dd3ea2de845cb
change-id: 20240315-add-t95-axp313-support-5f3da8996edd

Best regards,
-- 
Kamil Kasperski <ressetkk@gmail.com>