Received-SPF: pass (google.com: domain of linux-kernel+bounces-109980-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Thu, 21 Mar 2024 16:46:35 +0530
Subject: [PATCH v2 15/21] arm64: dts: qcom: ipq8074: Add PCIe bridge node
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240321-pcie-qcom-bridge-dts-v2-15-1eb790c53e43@linaro.org>
References: <20240321-pcie-qcom-bridge-dts-v2-0-1eb790c53e43@linaro.org>
In-Reply-To: <20240321-pcie-qcom-bridge-dts-v2-0-1eb790c53e43@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, cros-qcom-dts-watchers@chromium.org, 
 Rob Herring <robh@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
 linux-kernel@vger.kernel.org, 
 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e5b89753aa5c..12324841d1b0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -864,6 +864,16 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 				      "ahb",
 				      "axi_m_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0: pcie@20000000 {
@@ -929,6 +939,16 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 				      "axi_m_sticky",
 				      "axi_s_sticky";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 

-- 
2.25.1