Received-SPF: pass (google.com: domain of linux-kernel+bounces-110452-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
Precedence: bulk
Mime-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
Date: Thu, 21 Mar 2024 17:55:17 +0100
Message-Id: <CZZL3MNOT0QG.2WDSNX9XD2RET@matfyz.cz>
Cc: "Rob Herring" <robh+dt@kernel.org>,
        "Krzysztof Kozlowski"
 <krzysztof.kozlowski+dt@linaro.org>,
        "Conor Dooley" <conor+dt@kernel.org>,
        "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
        "Liam Girdwood"
 <lgirdwood@gmail.com>,
        "Mark Brown" <broonie@kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-input@vger.kernel.org>,
        =?utf-8?q?Duje_Mihanovi=C4=87?=
 <duje.mihanovic@skole.hr>,
        <~postmarketos/upstreaming@lists.sr.ht>, <phone-devel@vger.kernel.org>
Subject: Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
To: "Lee Jones" <lee@kernel.org>
From: "Karel Balej" <balejk@matfyz.cz>
References: <20240311160110.32185-1-karelb@gimli.ms.mff.cuni.cz>
 <20240311160110.32185-3-karelb@gimli.ms.mff.cuni.cz>
 <20240321154211.GA13211@google.com> <CZZK759UU6G7.MFPYOI0HBB6I@matfyz.cz>
 <20240321162045.GC13211@google.com>
In-Reply-To: <20240321162045.GC13211@google.com>

Lee Jones, 2024-03-21T16:20:45+00:00:
> On Thu, 21 Mar 2024, Karel Balej wrote:
>
> > Lee Jones, 2024-03-21T15:42:11+00:00:
> > > On Mon, 11 Mar 2024, Karel Balej wrote:
> > > > diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm88=
6.h
> > > > new file mode 100644
> > > > index 000000000000..a5e6524bb19d
> > > > --- /dev/null
> > > > +++ b/include/linux/mfd/88pm886.h
> > > > @@ -0,0 +1,38 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > > +#ifndef __MFD_88PM886_H
> > > > +#define __MFD_88PM886_H
> > > > +
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/regmap.h>
> > > > +
> > > > +#define PM886_A1_CHIP_ID		0xa1
> > > > +
> > > > +#define PM886_REGMAP_CONF_MAX_REG	0xfe
> > > > +
> > > > +#define PM886_REG_ID			0x00
> > > > +
> > > > +#define PM886_REG_STATUS1		0x01
> > > > +#define PM886_ONKEY_STS1		BIT(0)
> > > > +
> > > > +#define PM886_REG_MISC_CONFIG1		0x14
> > > > +#define PM886_SW_PDOWN			BIT(5)
> > > > +
> > > > +#define PM886_REG_MISC_CONFIG2		0x15
> > > > +#define PM886_INT_INV			BIT(0)
> > > > +#define PM886_INT_CLEAR			BIT(1)
> > > > +#define PM886_INT_RC			0x00
> > > > +#define PM886_INT_WC			BIT(1)
> > > > +#define PM886_INT_MASK_MODE		BIT(2)
> > > > +
> > > > +struct pm886_chip {
> > > > +	struct i2c_client *client;
> > > > +	unsigned int chip_id;
> > > > +	struct regmap *regmap;
> > > > +};
> > > > +
> > > > +static const struct regmap_config pm886_i2c_regmap =3D {
> > > > +	.reg_bits =3D 8,
> > > > +	.val_bits =3D 8,
> > > > +	.max_register =3D PM886_REGMAP_CONF_MAX_REG,
> > > > +};
> > >
> > > Why is this in here?
> >=20
> > Because since I moved the regulators regmap initialization into the
> > regulators driver, I need to access it from there.
>
> So move it into the regulators driver?

It is used in the MFD driver too for the base regmap.

K. B.