Received-SPF: pass (google.com: domain of linux-kernel+bounces-111487-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Andi Shyti <andi.shyti@kernel.org>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 09/64] i2c: bcm2835: reword according to newest specification
Date: Fri, 22 Mar 2024 14:25:02 +0100
Message-ID: <20240322132619.6389-10-wsa+renesas@sang-engineering.com>
In-Reply-To: <20240322132619.6389-1-wsa+renesas@sang-engineering.com>
References: <20240322132619.6389-1-wsa+renesas@sang-engineering.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-bcm2835.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index b92de1944221..62776e7fc586 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * BCM2835 master mode driver
+ * BCM2835 host controller mode driver
  */
 
 #include <linux/clk.h>
@@ -25,7 +25,7 @@
 #define BCM2835_I2C_DEL		0x18
 /*
  * 16-bit field for the number of SCL cycles to wait after rising SCL
- * before deciding the slave is not responding. 0 disables the
+ * before deciding the client is not responding. 0 disables the
  * timeout detection.
  */
 #define BCM2835_I2C_CLKT	0x1c
@@ -223,7 +223,7 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
 /*
  * Repeated Start Condition (Sr)
  * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it
- * talks about reading from a slave with 10 bit address. This is achieved by
+ * talks about reading from a client with 10 bit address. This is achieved by
  * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then
  * issue a read.
  * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the
@@ -391,7 +391,7 @@ static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm bcm2835_i2c_algo = {
-	.master_xfer	= bcm2835_i2c_xfer,
+	.xfer	= bcm2835_i2c_xfer,
 	.functionality	= bcm2835_i2c_func,
 };
 
-- 
2.43.0