Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759114AbYAJIyN (ORCPT ); Thu, 10 Jan 2008 03:54:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752402AbYAJIx6 (ORCPT ); Thu, 10 Jan 2008 03:53:58 -0500 Received: from mga11.intel.com ([192.55.52.93]:44280 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751833AbYAJIx4 (ORCPT ); Thu, 10 Jan 2008 03:53:56 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.24,265,1196668800"; d="scan'208";a="282646419" Subject: Re: [PATCH] ACPI: Add sysfs interface for acpi device wakeup From: Yi Yang Reply-To: yi.y.yang@intel.com To: Maxim Levitsky Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, lenb@kernel.org, acpi-bugzilla@lists.sourceforge.net In-Reply-To: <200801100943.08780.maximlevitsky@gmail.com> References: <1198738022.8950.3.camel@yangyi-dev.bj.intel.com> <1199688961.3551.19.camel@yangyi-dev.bj.intel.com> <1199917306.9596.3.camel@yangyi-dev.bj.intel.com> <200801100943.08780.maximlevitsky@gmail.com> Content-Type: text/plain Organization: Intel Date: Thu, 10 Jan 2008 07:59:36 +0800 Message-Id: <1199923176.3827.13.camel@yangyi-dev.bj.intel.com> Mime-Version: 1.0 X-Mailer: Evolution 2.10.1 (2.10.1-4.fc7) Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9949 Lines: 214 On Thu, 2008-01-10 at 09:43 +0200, Maxim Levitsky wrote: > On Thursday, 10 January 2008 00:21:46 Yi Yang wrote: > > Subject: ACPI: convert procfs to sysfs for /proc/acpi/wakeup > > From: Yi Yang > > > > /proc/acpi/wakeup is deprecated but it has to exist because > > we haven't a sysfs interface to replace it yet, this patch > > converts /proc/acpi/wakeup to sysfs interface, under every > > acpi device sysfs node, a user can see a directory "wakeup" > > if the acpi device can support wakeup, there are six files > > under this directory: > > > > acpi_bus_id bus_id pci_id run_wakeup sleep_state status > > > > All the files are read-only exclude "status" which is used > > to enable or disable wakeup of the acpi device. > > > > "acpi_bus_id" is acpi bus ID of the acpi device. > > > > "bus_id" is pci bus id of the device associated to the acpi > > device, it will be empty if there isn't any device associated > > to it. > > > > "pci_id" is PCI ID of the pci device associated to the acpi > > device, it will be empty if there isn't any device associated > > to it. > > > > "run_wake" is a flag indicating if a wakeup process is being > > handled. > > > > "sleep_state" is sleep state of the acpi device such as "S0". > > > > "status" is wakeup status of the acpi device, it is enabled > > or disabled, a user can change it be echoing "0", "1", > > "disabled" or "enabled" to /sys/devices/.../wakeup/status. > > > > Here is the test result: > > > > [root@localhost ~]# cat /proc/acpi/wakeup > > Device S-state Status Sysfs node PCI ID > > C093 S5 disabled pci:0000:00:1e.0 0x2448 > > C0E8 S3 disabled pci:0000:00:1d.0 0x27c8 > > C0EF S3 disabled pci:0000:00:1d.1 0x27c9 > > C0F0 S3 disabled pci:0000:00:1d.2 0x27ca > > C0F1 S3 disabled pci:0000:00:1d.3 0x27cb > > C0F2 S3 disabled pci:0000:00:1d.7 0x27cc > > C0F9 S0 disabled pci:0000:00:1c.0 0x27d0 > > C21D S0 disabled pci:0000:08:00.0 0x16fd > > C109 S5 disabled pci:0000:00:1c.1 0x27d2 > > C228 S5 disabled pci:0000:10:00.0 0x4222 > > C10F S5 disabled pci:0000:00:1c.3 0x27d6 > > C229 S5 disabled > > [root@localhost ~]# find /sys -name "*" | grep sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0d/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:15/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2b/device:2c/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/device:2e/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/wakeup/sleep_state > > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/sleep_state > > [root@localhost ~]# ls /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup > > acpi_bus_id bus_id pci_id run_wakeup sleep_state status > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/acpi_bus_id > > cat: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/acpi_bus_id: No such file or directory > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/acpi_bus_id > > C229 > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/sleep_state > > S5 > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/status > > disabled > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/bus_id > > > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/pci_id > > > > [root@localhost ~]# echo 1 > /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/status > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/device:30/wakeup/status > > enabled > > [root@localhost ~]# cat /proc/acpi/wakeup > > Device S-state Status Sysfs node PCI ID > > C093 S5 disabled pci:0000:00:1e.0 0x2448 > > C0E8 S3 disabled pci:0000:00:1d.0 0x27c8 > > C0EF S3 disabled pci:0000:00:1d.1 0x27c9 > > C0F0 S3 disabled pci:0000:00:1d.2 0x27ca > > C0F1 S3 disabled pci:0000:00:1d.3 0x27cb > > C0F2 S3 disabled pci:0000:00:1d.7 0x27cc > > C0F9 S0 enabled pci:0000:00:1c.0 0x27d0 > > C21D S0 enabled pci:0000:08:00.0 0x16fd > > C109 S5 enabled pci:0000:00:1c.1 0x27d2 > > C228 S5 enabled pci:0000:10:00.0 0x4222 > > C10F S5 enabled pci:0000:00:1c.3 0x27d6 > > C229 S5 enabled > > [root@localhost ~]# vi /var/log/dmesg > > [root@localhost ~]# dmesg | grep "same GPE" > > ACPI: 'C0F9' and 'C229' have the same GPE, can't disable/enable one seperately > > ACPI: 'C21D' and 'C229' have the same GPE, can't disable/enable one seperately > > ACPI: 'C109' and 'C229' have the same GPE, can't disable/enable one seperately > > ACPI: 'C228' and 'C229' have the same GPE, can't disable/enable one seperately > > ACPI: 'C10F' and 'C229' have the same GPE, can't disable/enable one seperately > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/*/wakeup/status > > disabled > > disabled > > disabled > > disabled > > disabled > > disabled > > enabled > > enabled > > enabled > > [root@localhost ~]# cat /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/*/*/wakeup/status > > enabled > > enabled > > enabled > > [root@localhost ~]# > > > I think that it would be much much better to place wake-up attributes under > corresponding PCI and PNP devices. Currently, all devices have had an wakeup attribute, it is /sys/.../power/wakeup, for example: /sys/devices/pci0000\:00/0000\:00\:00.0/power/wakeup /sys/class/tty/console/power/wakeup But it isn't the same as acpi device's, you can get all acpi devices with wakeup features from /proc/acpi/wakeup, you can also get all the "power/wakeup" from /sys, they aren't 1:1. [yangyi@yangyi-dev ~]$ cat /proc/acpi/wakeup Device S-state Status Sysfs node PCI ID SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 0x244e UAR1 S4 disabled pnp:00:09 0x0000 ILAN S4 disabled pci:0000:00:19.0 0x104b PEGP S4 disabled pci:0000:00:01.0 0x29a1 PEX0 S4 disabled pci:0000:00:1c.0 0x283f PEX1 S4 disabled pci:0000:00:1c.1 0x2841 PEX2 S4 disabled pci:0000:00:1c.2 0x2843 PEX3 S4 disabled pci:0000:00:1c.3 0x2845 PEX4 S4 disabled pci:0000:00:1c.4 0x2847 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 0x2830 UHC2 S3 disabled pci:0000:00:1d.1 0x2831 UHC3 S3 disabled pci:0000:00:1d.2 0x2832 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 0x2836 EHC2 S3 disabled pci:0000:00:1a.7 0x283a UH42 S3 disabled pci:0000:00:1a.0 0x2834 UHC5 S3 disabled pci:0000:00:1a.1 0x2835 AZAL S3 disabled pci:0000:00:1b.0 0x284b [yangyi@yangyi-dev ~]$ /home/yangyi/wakeup.sh /sys/devices/pci0000:00/0000:00:1a.0/usb1/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1a.1/usb2/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1a.7/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1a.7/usb6/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.0/usb3/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.0/usb3/3-2/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.1/usb4/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.2/usb5/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.7/power/wakeup enabled /sys/devices/pci0000:00/0000:00:1d.7/usb7/power/wakeup enabled /sys/class/tty/ttyS0/power/wakeup disabled /sys/class/tty/ttyS1/power/wakeup disabled /sys/class/tty/ttyS2/power/wakeup disabled /sys/class/tty/ttyS3/power/wakeup disabled [yangyi@yangyi-dev ~]$ >From source code, it seems they are different things. > > Probably it is even better to link this code to PCI code, so PCI drivers will be aware of ACPI. > For example it will fix the 'EHCI instantly wakes up the system from S4' on my system, since here USB doesn't wake > up anything from S4, and ACPI tables correctly show that. > > If ehci driver was aware of that it could disable #PME on entrance to S4. > And we even can reuse its 'wakeup' attribute, thus enabling wakeup automatically. > > Going ever further, I think that it will be great to get rid of ACPI device tree, since > most acpi devices are ether PCI of PNP ones. > > Or, even better have a small ACPI tree, that will contain 'true' ACPI devices, like cpus > thermal sensors, buttons, etc. Maybe this is a good idea, but i don't know the relationships between acpi devices, devices, pci devices and pnp devices. If we can merge all these things together, that will be a great job. > > Best regards, > Maxim Levitsky -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/